af11af357e
chore(readme): add matrix link
2024-04-11 12:16:52 +02:00
bb69885b8c
chore(readme): add repo info
2024-04-09 19:33:43 +02:00
573f01d5fe
NaxGCC Changes:
...
- update to KiCad 8
- replace micro USB & GCC connector with USB C
- add some JLCPCB symbols, footprints & models
2024-04-05 23:33:53 +02:00
Mitch Cairns
60a26d6523
Update to KiCad 7.0
...
- Resolved Z Button SMD solder pad being on the opposite side of the copper layer.
- Resolved SMD footprint designators for the copper button pads (ABXY, Dpad, Start, Triggers).
- Resolved some DRC failures for 3.3v layer disconnects on the front mask fill.
- Update files for KiCad 7.0
- Exclusions applied for cosmetic items tripping DRC.
2023-05-04 15:58:25 -07:00
CarVac
ff645aaa97
revert pads to 2.0.2, rev to 2.0.5
2023-04-17 20:51:04 -04:00
CarVac
b2ab47d154
maybe use this gba style dpad contact?
2023-04-17 20:50:15 -04:00
FrostSSBM
c2490eacda
Bom Changes 2
2023-04-01 14:11:45 -04:00
CarVac
063fb01db9
move usb lines to better connect 3.3v plane
2023-04-01 14:07:56 -04:00
CarVac
4a6e71464a
fix drc errors
2023-04-01 13:47:40 -04:00
CarVac
32944e838a
update pcb part designations
2023-04-01 13:44:21 -04:00
FrostSSBM
4c410f8ea8
BOM Generation
2023-04-01 13:13:22 -04:00
CarVac
2ad91bba97
slight c-stick wiring tweaks for aesthetics
2023-04-01 11:06:14 -04:00
CarVac
7188f8675c
minor tweaking of routing
2023-04-01 11:01:08 -04:00
CarVac
9267c3bb19
add lcsc part numbers
2023-03-31 23:14:14 -04:00
CarVac
6b8a38a646
replace discrete diodes with usblc6
2023-03-31 22:56:02 -04:00
Savestate2a03
3218b734d7
thick olyu usb lines, 2.0.4 version
2023-03-18 20:05:20 +01:00
Savestate2a03
2fcd0bc161
solder pad absolute clearance back to 0
2023-03-18 19:52:29 +01:00
Savestate2a03
4f09a47cf0
make z jumper not go through z button trace (for real)
2023-02-27 03:38:49 +01:00
Savestate2a03
482cd52a3b
make z jumper not go through z button trace
2023-02-27 03:38:09 +01:00
Savestate2a03
961fac72d9
remove rando silkscreen line
2023-02-25 04:26:11 +01:00
Savestate2a03
e1be7b5019
fix DRC and silkscreen
2023-02-24 01:15:50 +01:00
CarVac
5934528a65
reduce paste applied to rp2040 pins
2023-02-16 18:55:07 -05:00
CarVac
b3b45dc31d
small aesthetic tweak to traces
2023-02-14 22:45:51 -05:00
CarVac
a4631c1555
move 3.3v cap inboard of schottky
2023-02-14 22:31:31 -05:00
Mitch Cairns
36dd06e54a
Move C16 in 1mm
2023-02-14 18:32:09 -08:00
Mitch Cairns
18dbfc6b11
Inset components to account for rib
2023-02-12 16:39:24 -08:00
Mitch Cairns
274b1fd2dd
Isolate 47uF capacitor
...
Isolates the 47uF capacitor with a diode. Matches the voltage drop so there is a consistent power level across USB or GC cable. Prevents inrush current on USB power.
2023-02-12 16:25:30 -08:00
rana-sylvatica
8887a54fe6
ESD protection
...
Added 100k resistor between sgnd and gnd of usb connector
Added USBLC6 to protect USB data lines
Added TVS diodes to GCD and 3.3 lines
Added 47uF bulk capacitor
2023-02-11 15:55:44 -06:00
Savestate2a03
0492ce1528
bigger keepout around cstick header
2023-01-25 18:05:33 +01:00
Savestate2a03
0b770bdf69
keepout around cstick header
2023-01-25 17:59:18 +01:00
CarVac
eec78ddb8d
move L pads for JST clearance
2023-01-20 08:21:22 -05:00
Savestate2a03
447270dd3a
actually line up olyu for real (for real)
2023-01-16 19:39:58 +01:00
Savestate2a03
b141a7f10b
fix oly u by 1mm
2023-01-16 19:25:44 +01:00
Joseph El-Khouri
fd25c0dd60
Merge pull request #1 from PhobGCC/padChanges-dev
...
2.0.3 changes
2023-01-16 19:13:20 +01:00
Savestate2a03
b0eceff166
merge pad changes into main
2023-01-16 19:12:38 +01:00
Savestate2a03
2acbe07a9a
ground track coverage
2023-01-14 14:41:31 +01:00
Savestate2a03
323aa1bc90
oly u usb data pin position
2023-01-14 14:38:03 +01:00
Savestate2a03
cb7ced412f
'blue wire on left for oem cables'
2023-01-14 13:56:50 +01:00
Savestate2a03
19a6cb87ff
abxy pad center line thicker, round out dpad arch
2023-01-14 13:34:28 +01:00
Savestate2a03
22eca5d127
rotate c stick logo
2023-01-12 22:18:54 +01:00
Savestate2a03
1bb2ffcf3f
trigger board silkscreen update
2023-01-12 20:57:16 +01:00
Savestate2a03
8b1a8a51d3
abxy pad changes
2023-01-12 20:35:17 +01:00
Savestate2a03
abecce9963
rotate z jst and lengthen c board breakaway for z jst clearance
2022-12-23 15:29:38 +01:00
Savestate2a03
2e0b7c1e5e
remove unneeded layers in trigger paddles
2022-12-22 22:58:04 +01:00
Savestate2a03
43f97b546d
add footprints for trigger pads
2022-12-22 22:46:43 +01:00
Savestate2a03
31d071e34a
spiky trigger paddles
2022-12-22 22:46:13 +01:00
Savestate2a03
7dd72d1855
add base triggerboard
2022-12-22 21:16:05 +01:00
Savestate2a03
a575630465
add keepout rule to dpad
2022-12-21 21:19:08 +01:00
Savestate2a03
e4c9896cc7
add trigger paddles
2022-12-20 18:34:02 +01:00
Savestate2a03
a4a151ffa8
starting pad changes for 2.0.3
2022-12-20 18:24:39 +01:00
