From 10f59667879bc476004c78bc0d3d6a0c4f560e55 Mon Sep 17 00:00:00 2001 From: Dario Nieuwenhuis Date: Tue, 18 Jul 2023 14:17:44 +0200 Subject: [PATCH] Convert files to LF endings. --- embassy-nrf/src/pdm.rs | 588 +++++++++++++++--------------- embassy-stm32/src/qspi/mod.rs | 664 +++++++++++++++++----------------- 2 files changed, 626 insertions(+), 626 deletions(-) diff --git a/embassy-nrf/src/pdm.rs b/embassy-nrf/src/pdm.rs index 0e30f7002..efa1fbccc 100644 --- a/embassy-nrf/src/pdm.rs +++ b/embassy-nrf/src/pdm.rs @@ -1,294 +1,294 @@ -//! Pulse Density Modulation (PDM) mirophone driver. - -#![macro_use] - -use core::marker::PhantomData; -use core::sync::atomic::{compiler_fence, Ordering}; -use core::task::Poll; - -use embassy_hal_common::drop::OnDrop; -use embassy_hal_common::{into_ref, PeripheralRef}; -use futures::future::poll_fn; - -use crate::chip::EASY_DMA_SIZE; -use crate::gpio::sealed::Pin; -use crate::gpio::{AnyPin, Pin as GpioPin}; -use crate::interrupt::typelevel::Interrupt; -use crate::{interrupt, Peripheral}; - -/// Interrupt handler. -pub struct InterruptHandler { - _phantom: PhantomData, -} - -impl interrupt::typelevel::Handler for InterruptHandler { - unsafe fn on_interrupt() { - T::regs().intenclr.write(|w| w.end().clear()); - T::state().waker.wake(); - } -} - -/// PDM microphone interface -pub struct Pdm<'d, T: Instance> { - _peri: PeripheralRef<'d, T>, -} - -/// PDM error. -#[derive(Debug, Clone, Copy, PartialEq, Eq)] -#[cfg_attr(feature = "defmt", derive(defmt::Format))] -#[non_exhaustive] -pub enum Error { - /// Buffer is too long. - BufferTooLong, - /// Buffer is empty - BufferZeroLength, - /// PDM is not running - NotRunning, -} - -static DUMMY_BUFFER: [i16; 1] = [0; 1]; - -impl<'d, T: Instance> Pdm<'d, T> { - /// Create PDM driver - pub fn new( - pdm: impl Peripheral

+ 'd, - _irq: impl interrupt::typelevel::Binding> + 'd, - clk: impl Peripheral

+ 'd, - din: impl Peripheral

+ 'd, - config: Config, - ) -> Self { - into_ref!(pdm, clk, din); - Self::new_inner(pdm, clk.map_into(), din.map_into(), config) - } - - fn new_inner( - pdm: PeripheralRef<'d, T>, - clk: PeripheralRef<'d, AnyPin>, - din: PeripheralRef<'d, AnyPin>, - config: Config, - ) -> Self { - into_ref!(pdm); - - let r = T::regs(); - - // setup gpio pins - din.conf().write(|w| w.input().set_bit()); - r.psel.din.write(|w| unsafe { w.bits(din.psel_bits()) }); - clk.set_low(); - clk.conf().write(|w| w.dir().output()); - r.psel.clk.write(|w| unsafe { w.bits(clk.psel_bits()) }); - - // configure - // use default for - // - gain right - // - gain left - // - clk - // - ratio - r.mode.write(|w| { - w.edge().bit(config.edge == Edge::LeftRising); - w.operation().bit(config.operation_mode == OperationMode::Mono); - w - }); - r.gainl.write(|w| w.gainl().default_gain()); - r.gainr.write(|w| w.gainr().default_gain()); - - // IRQ - T::Interrupt::unpend(); - unsafe { T::Interrupt::enable() }; - - r.enable.write(|w| w.enable().set_bit()); - - Self { _peri: pdm } - } - - /// Start sampling microphon data into a dummy buffer - /// Usefull to start the microphon and keep it active between recording samples - pub async fn start(&mut self) { - let r = T::regs(); - - // start dummy sampling because microphon needs some setup time - r.sample - .ptr - .write(|w| unsafe { w.sampleptr().bits(DUMMY_BUFFER.as_ptr() as u32) }); - r.sample - .maxcnt - .write(|w| unsafe { w.buffsize().bits(DUMMY_BUFFER.len() as _) }); - - r.tasks_start.write(|w| unsafe { w.bits(1) }); - } - - /// Stop sampling microphon data inta a dummy buffer - pub async fn stop(&mut self) { - let r = T::regs(); - r.tasks_stop.write(|w| unsafe { w.bits(1) }); - r.events_started.reset(); - } - - /// Sample data into the given buffer. - pub async fn sample(&mut self, buffer: &mut [i16]) -> Result<(), Error> { - if buffer.len() == 0 { - return Err(Error::BufferZeroLength); - } - if buffer.len() > EASY_DMA_SIZE { - return Err(Error::BufferTooLong); - } - - let r = T::regs(); - - if r.events_started.read().bits() == 0 { - return Err(Error::NotRunning); - } - - let drop = OnDrop::new(move || { - r.intenclr.write(|w| w.end().clear()); - r.events_stopped.reset(); - - // reset to dummy buffer - r.sample - .ptr - .write(|w| unsafe { w.sampleptr().bits(DUMMY_BUFFER.as_ptr() as u32) }); - r.sample - .maxcnt - .write(|w| unsafe { w.buffsize().bits(DUMMY_BUFFER.len() as _) }); - - while r.events_stopped.read().bits() == 0 {} - }); - - // setup user buffer - let ptr = buffer.as_ptr(); - let len = buffer.len(); - r.sample.ptr.write(|w| unsafe { w.sampleptr().bits(ptr as u32) }); - r.sample.maxcnt.write(|w| unsafe { w.buffsize().bits(len as _) }); - - // wait till the current sample is finished and the user buffer sample is started - Self::wait_for_sample().await; - - // reset the buffer back to the dummy buffer - r.sample - .ptr - .write(|w| unsafe { w.sampleptr().bits(DUMMY_BUFFER.as_ptr() as u32) }); - r.sample - .maxcnt - .write(|w| unsafe { w.buffsize().bits(DUMMY_BUFFER.len() as _) }); - - // wait till the user buffer is sampled - Self::wait_for_sample().await; - - drop.defuse(); - - Ok(()) - } - - async fn wait_for_sample() { - let r = T::regs(); - - r.events_end.reset(); - r.intenset.write(|w| w.end().set()); - - compiler_fence(Ordering::SeqCst); - - poll_fn(|cx| { - T::state().waker.register(cx.waker()); - if r.events_end.read().bits() != 0 { - return Poll::Ready(()); - } - Poll::Pending - }) - .await; - - compiler_fence(Ordering::SeqCst); - } -} - -/// PDM microphone driver Config -pub struct Config { - /// Use stero or mono operation - pub operation_mode: OperationMode, - /// On which edge the left channel should be samples - pub edge: Edge, -} - -impl Default for Config { - fn default() -> Self { - Self { - operation_mode: OperationMode::Mono, - edge: Edge::LeftFalling, - } - } -} - -/// PDM operation mode. -#[derive(PartialEq)] -pub enum OperationMode { - /// Mono (1 channel) - Mono, - /// Stereo (2 channels) - Stereo, -} - -/// PDM edge polarity -#[derive(PartialEq)] -pub enum Edge { - /// Left edge is rising - LeftRising, - /// Left edge is falling - LeftFalling, -} - -impl<'d, T: Instance> Drop for Pdm<'d, T> { - fn drop(&mut self) { - let r = T::regs(); - - r.tasks_stop.write(|w| unsafe { w.bits(1) }); - - r.enable.write(|w| w.enable().disabled()); - - r.psel.din.reset(); - r.psel.clk.reset(); - } -} - -pub(crate) mod sealed { - use embassy_sync::waitqueue::AtomicWaker; - - /// Peripheral static state - pub struct State { - pub waker: AtomicWaker, - } - - impl State { - pub const fn new() -> Self { - Self { - waker: AtomicWaker::new(), - } - } - } - - pub trait Instance { - fn regs() -> &'static crate::pac::pdm::RegisterBlock; - fn state() -> &'static State; - } -} - -/// PDM peripheral instance. -pub trait Instance: Peripheral

+ sealed::Instance + 'static + Send { - /// Interrupt for this peripheral. - type Interrupt: interrupt::typelevel::Interrupt; -} - -macro_rules! impl_pdm { - ($type:ident, $pac_type:ident, $irq:ident) => { - impl crate::pdm::sealed::Instance for peripherals::$type { - fn regs() -> &'static crate::pac::pdm::RegisterBlock { - unsafe { &*pac::$pac_type::ptr() } - } - fn state() -> &'static crate::pdm::sealed::State { - static STATE: crate::pdm::sealed::State = crate::pdm::sealed::State::new(); - &STATE - } - } - impl crate::pdm::Instance for peripherals::$type { - type Interrupt = crate::interrupt::typelevel::$irq; - } - }; -} +//! Pulse Density Modulation (PDM) mirophone driver. + +#![macro_use] + +use core::marker::PhantomData; +use core::sync::atomic::{compiler_fence, Ordering}; +use core::task::Poll; + +use embassy_hal_common::drop::OnDrop; +use embassy_hal_common::{into_ref, PeripheralRef}; +use futures::future::poll_fn; + +use crate::chip::EASY_DMA_SIZE; +use crate::gpio::sealed::Pin; +use crate::gpio::{AnyPin, Pin as GpioPin}; +use crate::interrupt::typelevel::Interrupt; +use crate::{interrupt, Peripheral}; + +/// Interrupt handler. +pub struct InterruptHandler { + _phantom: PhantomData, +} + +impl interrupt::typelevel::Handler for InterruptHandler { + unsafe fn on_interrupt() { + T::regs().intenclr.write(|w| w.end().clear()); + T::state().waker.wake(); + } +} + +/// PDM microphone interface +pub struct Pdm<'d, T: Instance> { + _peri: PeripheralRef<'d, T>, +} + +/// PDM error. +#[derive(Debug, Clone, Copy, PartialEq, Eq)] +#[cfg_attr(feature = "defmt", derive(defmt::Format))] +#[non_exhaustive] +pub enum Error { + /// Buffer is too long. + BufferTooLong, + /// Buffer is empty + BufferZeroLength, + /// PDM is not running + NotRunning, +} + +static DUMMY_BUFFER: [i16; 1] = [0; 1]; + +impl<'d, T: Instance> Pdm<'d, T> { + /// Create PDM driver + pub fn new( + pdm: impl Peripheral

+ 'd, + _irq: impl interrupt::typelevel::Binding> + 'd, + clk: impl Peripheral

+ 'd, + din: impl Peripheral

+ 'd, + config: Config, + ) -> Self { + into_ref!(pdm, clk, din); + Self::new_inner(pdm, clk.map_into(), din.map_into(), config) + } + + fn new_inner( + pdm: PeripheralRef<'d, T>, + clk: PeripheralRef<'d, AnyPin>, + din: PeripheralRef<'d, AnyPin>, + config: Config, + ) -> Self { + into_ref!(pdm); + + let r = T::regs(); + + // setup gpio pins + din.conf().write(|w| w.input().set_bit()); + r.psel.din.write(|w| unsafe { w.bits(din.psel_bits()) }); + clk.set_low(); + clk.conf().write(|w| w.dir().output()); + r.psel.clk.write(|w| unsafe { w.bits(clk.psel_bits()) }); + + // configure + // use default for + // - gain right + // - gain left + // - clk + // - ratio + r.mode.write(|w| { + w.edge().bit(config.edge == Edge::LeftRising); + w.operation().bit(config.operation_mode == OperationMode::Mono); + w + }); + r.gainl.write(|w| w.gainl().default_gain()); + r.gainr.write(|w| w.gainr().default_gain()); + + // IRQ + T::Interrupt::unpend(); + unsafe { T::Interrupt::enable() }; + + r.enable.write(|w| w.enable().set_bit()); + + Self { _peri: pdm } + } + + /// Start sampling microphon data into a dummy buffer + /// Usefull to start the microphon and keep it active between recording samples + pub async fn start(&mut self) { + let r = T::regs(); + + // start dummy sampling because microphon needs some setup time + r.sample + .ptr + .write(|w| unsafe { w.sampleptr().bits(DUMMY_BUFFER.as_ptr() as u32) }); + r.sample + .maxcnt + .write(|w| unsafe { w.buffsize().bits(DUMMY_BUFFER.len() as _) }); + + r.tasks_start.write(|w| unsafe { w.bits(1) }); + } + + /// Stop sampling microphon data inta a dummy buffer + pub async fn stop(&mut self) { + let r = T::regs(); + r.tasks_stop.write(|w| unsafe { w.bits(1) }); + r.events_started.reset(); + } + + /// Sample data into the given buffer. + pub async fn sample(&mut self, buffer: &mut [i16]) -> Result<(), Error> { + if buffer.len() == 0 { + return Err(Error::BufferZeroLength); + } + if buffer.len() > EASY_DMA_SIZE { + return Err(Error::BufferTooLong); + } + + let r = T::regs(); + + if r.events_started.read().bits() == 0 { + return Err(Error::NotRunning); + } + + let drop = OnDrop::new(move || { + r.intenclr.write(|w| w.end().clear()); + r.events_stopped.reset(); + + // reset to dummy buffer + r.sample + .ptr + .write(|w| unsafe { w.sampleptr().bits(DUMMY_BUFFER.as_ptr() as u32) }); + r.sample + .maxcnt + .write(|w| unsafe { w.buffsize().bits(DUMMY_BUFFER.len() as _) }); + + while r.events_stopped.read().bits() == 0 {} + }); + + // setup user buffer + let ptr = buffer.as_ptr(); + let len = buffer.len(); + r.sample.ptr.write(|w| unsafe { w.sampleptr().bits(ptr as u32) }); + r.sample.maxcnt.write(|w| unsafe { w.buffsize().bits(len as _) }); + + // wait till the current sample is finished and the user buffer sample is started + Self::wait_for_sample().await; + + // reset the buffer back to the dummy buffer + r.sample + .ptr + .write(|w| unsafe { w.sampleptr().bits(DUMMY_BUFFER.as_ptr() as u32) }); + r.sample + .maxcnt + .write(|w| unsafe { w.buffsize().bits(DUMMY_BUFFER.len() as _) }); + + // wait till the user buffer is sampled + Self::wait_for_sample().await; + + drop.defuse(); + + Ok(()) + } + + async fn wait_for_sample() { + let r = T::regs(); + + r.events_end.reset(); + r.intenset.write(|w| w.end().set()); + + compiler_fence(Ordering::SeqCst); + + poll_fn(|cx| { + T::state().waker.register(cx.waker()); + if r.events_end.read().bits() != 0 { + return Poll::Ready(()); + } + Poll::Pending + }) + .await; + + compiler_fence(Ordering::SeqCst); + } +} + +/// PDM microphone driver Config +pub struct Config { + /// Use stero or mono operation + pub operation_mode: OperationMode, + /// On which edge the left channel should be samples + pub edge: Edge, +} + +impl Default for Config { + fn default() -> Self { + Self { + operation_mode: OperationMode::Mono, + edge: Edge::LeftFalling, + } + } +} + +/// PDM operation mode. +#[derive(PartialEq)] +pub enum OperationMode { + /// Mono (1 channel) + Mono, + /// Stereo (2 channels) + Stereo, +} + +/// PDM edge polarity +#[derive(PartialEq)] +pub enum Edge { + /// Left edge is rising + LeftRising, + /// Left edge is falling + LeftFalling, +} + +impl<'d, T: Instance> Drop for Pdm<'d, T> { + fn drop(&mut self) { + let r = T::regs(); + + r.tasks_stop.write(|w| unsafe { w.bits(1) }); + + r.enable.write(|w| w.enable().disabled()); + + r.psel.din.reset(); + r.psel.clk.reset(); + } +} + +pub(crate) mod sealed { + use embassy_sync::waitqueue::AtomicWaker; + + /// Peripheral static state + pub struct State { + pub waker: AtomicWaker, + } + + impl State { + pub const fn new() -> Self { + Self { + waker: AtomicWaker::new(), + } + } + } + + pub trait Instance { + fn regs() -> &'static crate::pac::pdm::RegisterBlock; + fn state() -> &'static State; + } +} + +/// PDM peripheral instance. +pub trait Instance: Peripheral

+ sealed::Instance + 'static + Send { + /// Interrupt for this peripheral. + type Interrupt: interrupt::typelevel::Interrupt; +} + +macro_rules! impl_pdm { + ($type:ident, $pac_type:ident, $irq:ident) => { + impl crate::pdm::sealed::Instance for peripherals::$type { + fn regs() -> &'static crate::pac::pdm::RegisterBlock { + unsafe { &*pac::$pac_type::ptr() } + } + fn state() -> &'static crate::pdm::sealed::State { + static STATE: crate::pdm::sealed::State = crate::pdm::sealed::State::new(); + &STATE + } + } + impl crate::pdm::Instance for peripherals::$type { + type Interrupt = crate::interrupt::typelevel::$irq; + } + }; +} diff --git a/embassy-stm32/src/qspi/mod.rs b/embassy-stm32/src/qspi/mod.rs index e9db934bf..31b676088 100644 --- a/embassy-stm32/src/qspi/mod.rs +++ b/embassy-stm32/src/qspi/mod.rs @@ -1,332 +1,332 @@ -#![macro_use] - -pub mod enums; - -use embassy_hal_common::{into_ref, PeripheralRef}; -use enums::*; - -use crate::dma::Transfer; -use crate::gpio::sealed::AFType; -use crate::gpio::AnyPin; -use crate::pac::quadspi::Quadspi as Regs; -use crate::rcc::RccPeripheral; -use crate::{peripherals, Peripheral}; - -pub struct TransferConfig { - /// Instraction width (IMODE) - pub iwidth: QspiWidth, - /// Address width (ADMODE) - pub awidth: QspiWidth, - /// Data width (DMODE) - pub dwidth: QspiWidth, - /// Instruction Id - pub instruction: u8, - /// Flash memory address - pub address: Option, - /// Number of dummy cycles (DCYC) - pub dummy: DummyCycles, - /// Length of data - pub data_len: Option, -} - -impl Default for TransferConfig { - fn default() -> Self { - Self { - iwidth: QspiWidth::NONE, - awidth: QspiWidth::NONE, - dwidth: QspiWidth::NONE, - instruction: 0, - address: None, - dummy: DummyCycles::_0, - data_len: None, - } - } -} - -pub struct Config { - /// Flash memory size representend as 2^[0-32], as reasonable minimum 1KiB(9) was chosen. - /// If you need other value the whose predefined use `Other` variant. - pub memory_size: MemorySize, - /// Address size (8/16/24/32-bit) - pub address_size: AddressSize, - /// Scalar factor for generating CLK [0-255] - pub prescaler: u8, - /// Number of bytes to trigger FIFO threshold flag. - pub fifo_threshold: FIFOThresholdLevel, - /// Minimum number of cycles that chip select must be high between issued commands - pub cs_high_time: ChipSelectHightTime, -} - -impl Default for Config { - fn default() -> Self { - Self { - memory_size: MemorySize::Other(0), - address_size: AddressSize::_24bit, - prescaler: 128, - fifo_threshold: FIFOThresholdLevel::_17Bytes, - cs_high_time: ChipSelectHightTime::_5Cycle, - } - } -} - -#[allow(dead_code)] -pub struct Qspi<'d, T: Instance, Dma> { - _peri: PeripheralRef<'d, T>, - sck: Option>, - d0: Option>, - d1: Option>, - d2: Option>, - d3: Option>, - nss: Option>, - dma: PeripheralRef<'d, Dma>, - config: Config, -} - -impl<'d, T: Instance, Dma> Qspi<'d, T, Dma> { - pub fn new( - peri: impl Peripheral

+ 'd, - d0: impl Peripheral

> + 'd, - d1: impl Peripheral

> + 'd, - d2: impl Peripheral

> + 'd, - d3: impl Peripheral

> + 'd, - sck: impl Peripheral

> + 'd, - nss: impl Peripheral

> + 'd, - dma: impl Peripheral

+ 'd, - config: Config, - ) -> Self { - into_ref!(peri, d0, d1, d2, d3, sck, nss); - - sck.set_as_af(sck.af_num(), AFType::OutputPushPull); - sck.set_speed(crate::gpio::Speed::VeryHigh); - nss.set_as_af(nss.af_num(), AFType::OutputPushPull); - nss.set_speed(crate::gpio::Speed::VeryHigh); - d0.set_as_af(d0.af_num(), AFType::OutputPushPull); - d0.set_speed(crate::gpio::Speed::VeryHigh); - d1.set_as_af(d1.af_num(), AFType::OutputPushPull); - d1.set_speed(crate::gpio::Speed::VeryHigh); - d2.set_as_af(d2.af_num(), AFType::OutputPushPull); - d2.set_speed(crate::gpio::Speed::VeryHigh); - d3.set_as_af(d3.af_num(), AFType::OutputPushPull); - d3.set_speed(crate::gpio::Speed::VeryHigh); - - Self::new_inner( - peri, - Some(d0.map_into()), - Some(d1.map_into()), - Some(d2.map_into()), - Some(d3.map_into()), - Some(sck.map_into()), - Some(nss.map_into()), - dma, - config, - ) - } - - fn new_inner( - peri: impl Peripheral

+ 'd, - d0: Option>, - d1: Option>, - d2: Option>, - d3: Option>, - sck: Option>, - nss: Option>, - dma: impl Peripheral

+ 'd, - config: Config, - ) -> Self { - into_ref!(peri, dma); - - T::enable(); - T::REGS.cr().write(|w| w.set_fthres(config.fifo_threshold.into())); - - while T::REGS.sr().read().busy() {} - - T::REGS.cr().write(|w| { - w.set_prescaler(config.prescaler); - w.set_en(true); - }); - T::REGS.dcr().write(|w| { - w.set_fsize(config.memory_size.into()); - w.set_csht(config.cs_high_time.into()); - w.set_ckmode(false); - }); - - Self { - _peri: peri, - sck, - d0, - d1, - d2, - d3, - nss, - dma, - config, - } - } - - pub fn command(&mut self, transaction: TransferConfig) { - T::REGS.cr().modify(|v| v.set_dmaen(false)); - self.setup_transaction(QspiMode::IndirectWrite, &transaction); - - while !T::REGS.sr().read().tcf() {} - T::REGS.fcr().modify(|v| v.set_ctcf(true)); - } - - pub fn blocking_read(&mut self, buf: &mut [u8], transaction: TransferConfig) { - T::REGS.cr().modify(|v| v.set_dmaen(false)); - self.setup_transaction(QspiMode::IndirectWrite, &transaction); - - if let Some(len) = transaction.data_len { - let current_ar = T::REGS.ar().read().address(); - T::REGS.ccr().modify(|v| { - v.set_fmode(QspiMode::IndirectRead.into()); - }); - T::REGS.ar().write(|v| { - v.set_address(current_ar); - }); - - for idx in 0..len { - while !T::REGS.sr().read().tcf() && !T::REGS.sr().read().ftf() {} - buf[idx] = unsafe { (T::REGS.dr().as_ptr() as *mut u8).read_volatile() }; - } - } - - while !T::REGS.sr().read().tcf() {} - T::REGS.fcr().modify(|v| v.set_ctcf(true)); - } - - pub fn blocking_write(&mut self, buf: &[u8], transaction: TransferConfig) { - T::REGS.cr().modify(|v| v.set_dmaen(false)); - self.setup_transaction(QspiMode::IndirectWrite, &transaction); - - if let Some(len) = transaction.data_len { - T::REGS.ccr().modify(|v| { - v.set_fmode(QspiMode::IndirectWrite.into()); - }); - - for idx in 0..len { - while !T::REGS.sr().read().ftf() {} - unsafe { (T::REGS.dr().as_ptr() as *mut u8).write_volatile(buf[idx]) }; - } - } - - while !T::REGS.sr().read().tcf() {} - T::REGS.fcr().modify(|v| v.set_ctcf(true)); - } - - pub fn blocking_read_dma(&mut self, buf: &mut [u8], transaction: TransferConfig) - where - Dma: QuadDma, - { - self.setup_transaction(QspiMode::IndirectWrite, &transaction); - - T::REGS.ccr().modify(|v| { - v.set_fmode(QspiMode::IndirectRead.into()); - }); - let current_ar = T::REGS.ar().read().address(); - T::REGS.ar().write(|v| { - v.set_address(current_ar); - }); - - let request = self.dma.request(); - let transfer = unsafe { - Transfer::new_read( - &mut self.dma, - request, - T::REGS.dr().as_ptr() as *mut u8, - buf, - Default::default(), - ) - }; - - T::REGS.cr().modify(|v| v.set_dmaen(true)); - - transfer.blocking_wait(); - } - - pub fn blocking_write_dma(&mut self, buf: &[u8], transaction: TransferConfig) - where - Dma: QuadDma, - { - self.setup_transaction(QspiMode::IndirectWrite, &transaction); - - T::REGS.ccr().modify(|v| { - v.set_fmode(QspiMode::IndirectWrite.into()); - }); - - let request = self.dma.request(); - let transfer = unsafe { - Transfer::new_write( - &mut self.dma, - request, - buf, - T::REGS.dr().as_ptr() as *mut u8, - Default::default(), - ) - }; - - T::REGS.cr().modify(|v| v.set_dmaen(true)); - - transfer.blocking_wait(); - } - - fn setup_transaction(&mut self, fmode: QspiMode, transaction: &TransferConfig) { - T::REGS.fcr().modify(|v| { - v.set_csmf(true); - v.set_ctcf(true); - v.set_ctef(true); - v.set_ctof(true); - }); - - while T::REGS.sr().read().busy() {} - - if let Some(len) = transaction.data_len { - T::REGS.dlr().write(|v| v.set_dl(len as u32 - 1)); - } - - T::REGS.ccr().write(|v| { - v.set_fmode(fmode.into()); - v.set_imode(transaction.iwidth.into()); - v.set_instruction(transaction.instruction); - v.set_admode(transaction.awidth.into()); - v.set_adsize(self.config.address_size.into()); - v.set_dmode(transaction.dwidth.into()); - v.set_abmode(QspiWidth::NONE.into()); - v.set_dcyc(transaction.dummy.into()); - }); - - if let Some(addr) = transaction.address { - T::REGS.ar().write(|v| { - v.set_address(addr); - }); - } - } -} - -pub(crate) mod sealed { - use super::*; - - pub trait Instance { - const REGS: Regs; - } -} - -pub trait Instance: Peripheral

+ sealed::Instance + RccPeripheral {} - -pin_trait!(SckPin, Instance); -pin_trait!(D0Pin, Instance); -pin_trait!(D1Pin, Instance); -pin_trait!(D2Pin, Instance); -pin_trait!(D3Pin, Instance); -pin_trait!(NSSPin, Instance); - -dma_trait!(QuadDma, Instance); - -foreach_peripheral!( - (quadspi, $inst:ident) => { - impl sealed::Instance for peripherals::$inst { - const REGS: Regs = crate::pac::$inst; - } - - impl Instance for peripherals::$inst {} - }; -); +#![macro_use] + +pub mod enums; + +use embassy_hal_common::{into_ref, PeripheralRef}; +use enums::*; + +use crate::dma::Transfer; +use crate::gpio::sealed::AFType; +use crate::gpio::AnyPin; +use crate::pac::quadspi::Quadspi as Regs; +use crate::rcc::RccPeripheral; +use crate::{peripherals, Peripheral}; + +pub struct TransferConfig { + /// Instraction width (IMODE) + pub iwidth: QspiWidth, + /// Address width (ADMODE) + pub awidth: QspiWidth, + /// Data width (DMODE) + pub dwidth: QspiWidth, + /// Instruction Id + pub instruction: u8, + /// Flash memory address + pub address: Option, + /// Number of dummy cycles (DCYC) + pub dummy: DummyCycles, + /// Length of data + pub data_len: Option, +} + +impl Default for TransferConfig { + fn default() -> Self { + Self { + iwidth: QspiWidth::NONE, + awidth: QspiWidth::NONE, + dwidth: QspiWidth::NONE, + instruction: 0, + address: None, + dummy: DummyCycles::_0, + data_len: None, + } + } +} + +pub struct Config { + /// Flash memory size representend as 2^[0-32], as reasonable minimum 1KiB(9) was chosen. + /// If you need other value the whose predefined use `Other` variant. + pub memory_size: MemorySize, + /// Address size (8/16/24/32-bit) + pub address_size: AddressSize, + /// Scalar factor for generating CLK [0-255] + pub prescaler: u8, + /// Number of bytes to trigger FIFO threshold flag. + pub fifo_threshold: FIFOThresholdLevel, + /// Minimum number of cycles that chip select must be high between issued commands + pub cs_high_time: ChipSelectHightTime, +} + +impl Default for Config { + fn default() -> Self { + Self { + memory_size: MemorySize::Other(0), + address_size: AddressSize::_24bit, + prescaler: 128, + fifo_threshold: FIFOThresholdLevel::_17Bytes, + cs_high_time: ChipSelectHightTime::_5Cycle, + } + } +} + +#[allow(dead_code)] +pub struct Qspi<'d, T: Instance, Dma> { + _peri: PeripheralRef<'d, T>, + sck: Option>, + d0: Option>, + d1: Option>, + d2: Option>, + d3: Option>, + nss: Option>, + dma: PeripheralRef<'d, Dma>, + config: Config, +} + +impl<'d, T: Instance, Dma> Qspi<'d, T, Dma> { + pub fn new( + peri: impl Peripheral

+ 'd, + d0: impl Peripheral

> + 'd, + d1: impl Peripheral

> + 'd, + d2: impl Peripheral

> + 'd, + d3: impl Peripheral

> + 'd, + sck: impl Peripheral

> + 'd, + nss: impl Peripheral

> + 'd, + dma: impl Peripheral

+ 'd, + config: Config, + ) -> Self { + into_ref!(peri, d0, d1, d2, d3, sck, nss); + + sck.set_as_af(sck.af_num(), AFType::OutputPushPull); + sck.set_speed(crate::gpio::Speed::VeryHigh); + nss.set_as_af(nss.af_num(), AFType::OutputPushPull); + nss.set_speed(crate::gpio::Speed::VeryHigh); + d0.set_as_af(d0.af_num(), AFType::OutputPushPull); + d0.set_speed(crate::gpio::Speed::VeryHigh); + d1.set_as_af(d1.af_num(), AFType::OutputPushPull); + d1.set_speed(crate::gpio::Speed::VeryHigh); + d2.set_as_af(d2.af_num(), AFType::OutputPushPull); + d2.set_speed(crate::gpio::Speed::VeryHigh); + d3.set_as_af(d3.af_num(), AFType::OutputPushPull); + d3.set_speed(crate::gpio::Speed::VeryHigh); + + Self::new_inner( + peri, + Some(d0.map_into()), + Some(d1.map_into()), + Some(d2.map_into()), + Some(d3.map_into()), + Some(sck.map_into()), + Some(nss.map_into()), + dma, + config, + ) + } + + fn new_inner( + peri: impl Peripheral

+ 'd, + d0: Option>, + d1: Option>, + d2: Option>, + d3: Option>, + sck: Option>, + nss: Option>, + dma: impl Peripheral

+ 'd, + config: Config, + ) -> Self { + into_ref!(peri, dma); + + T::enable(); + T::REGS.cr().write(|w| w.set_fthres(config.fifo_threshold.into())); + + while T::REGS.sr().read().busy() {} + + T::REGS.cr().write(|w| { + w.set_prescaler(config.prescaler); + w.set_en(true); + }); + T::REGS.dcr().write(|w| { + w.set_fsize(config.memory_size.into()); + w.set_csht(config.cs_high_time.into()); + w.set_ckmode(false); + }); + + Self { + _peri: peri, + sck, + d0, + d1, + d2, + d3, + nss, + dma, + config, + } + } + + pub fn command(&mut self, transaction: TransferConfig) { + T::REGS.cr().modify(|v| v.set_dmaen(false)); + self.setup_transaction(QspiMode::IndirectWrite, &transaction); + + while !T::REGS.sr().read().tcf() {} + T::REGS.fcr().modify(|v| v.set_ctcf(true)); + } + + pub fn blocking_read(&mut self, buf: &mut [u8], transaction: TransferConfig) { + T::REGS.cr().modify(|v| v.set_dmaen(false)); + self.setup_transaction(QspiMode::IndirectWrite, &transaction); + + if let Some(len) = transaction.data_len { + let current_ar = T::REGS.ar().read().address(); + T::REGS.ccr().modify(|v| { + v.set_fmode(QspiMode::IndirectRead.into()); + }); + T::REGS.ar().write(|v| { + v.set_address(current_ar); + }); + + for idx in 0..len { + while !T::REGS.sr().read().tcf() && !T::REGS.sr().read().ftf() {} + buf[idx] = unsafe { (T::REGS.dr().as_ptr() as *mut u8).read_volatile() }; + } + } + + while !T::REGS.sr().read().tcf() {} + T::REGS.fcr().modify(|v| v.set_ctcf(true)); + } + + pub fn blocking_write(&mut self, buf: &[u8], transaction: TransferConfig) { + T::REGS.cr().modify(|v| v.set_dmaen(false)); + self.setup_transaction(QspiMode::IndirectWrite, &transaction); + + if let Some(len) = transaction.data_len { + T::REGS.ccr().modify(|v| { + v.set_fmode(QspiMode::IndirectWrite.into()); + }); + + for idx in 0..len { + while !T::REGS.sr().read().ftf() {} + unsafe { (T::REGS.dr().as_ptr() as *mut u8).write_volatile(buf[idx]) }; + } + } + + while !T::REGS.sr().read().tcf() {} + T::REGS.fcr().modify(|v| v.set_ctcf(true)); + } + + pub fn blocking_read_dma(&mut self, buf: &mut [u8], transaction: TransferConfig) + where + Dma: QuadDma, + { + self.setup_transaction(QspiMode::IndirectWrite, &transaction); + + T::REGS.ccr().modify(|v| { + v.set_fmode(QspiMode::IndirectRead.into()); + }); + let current_ar = T::REGS.ar().read().address(); + T::REGS.ar().write(|v| { + v.set_address(current_ar); + }); + + let request = self.dma.request(); + let transfer = unsafe { + Transfer::new_read( + &mut self.dma, + request, + T::REGS.dr().as_ptr() as *mut u8, + buf, + Default::default(), + ) + }; + + T::REGS.cr().modify(|v| v.set_dmaen(true)); + + transfer.blocking_wait(); + } + + pub fn blocking_write_dma(&mut self, buf: &[u8], transaction: TransferConfig) + where + Dma: QuadDma, + { + self.setup_transaction(QspiMode::IndirectWrite, &transaction); + + T::REGS.ccr().modify(|v| { + v.set_fmode(QspiMode::IndirectWrite.into()); + }); + + let request = self.dma.request(); + let transfer = unsafe { + Transfer::new_write( + &mut self.dma, + request, + buf, + T::REGS.dr().as_ptr() as *mut u8, + Default::default(), + ) + }; + + T::REGS.cr().modify(|v| v.set_dmaen(true)); + + transfer.blocking_wait(); + } + + fn setup_transaction(&mut self, fmode: QspiMode, transaction: &TransferConfig) { + T::REGS.fcr().modify(|v| { + v.set_csmf(true); + v.set_ctcf(true); + v.set_ctef(true); + v.set_ctof(true); + }); + + while T::REGS.sr().read().busy() {} + + if let Some(len) = transaction.data_len { + T::REGS.dlr().write(|v| v.set_dl(len as u32 - 1)); + } + + T::REGS.ccr().write(|v| { + v.set_fmode(fmode.into()); + v.set_imode(transaction.iwidth.into()); + v.set_instruction(transaction.instruction); + v.set_admode(transaction.awidth.into()); + v.set_adsize(self.config.address_size.into()); + v.set_dmode(transaction.dwidth.into()); + v.set_abmode(QspiWidth::NONE.into()); + v.set_dcyc(transaction.dummy.into()); + }); + + if let Some(addr) = transaction.address { + T::REGS.ar().write(|v| { + v.set_address(addr); + }); + } + } +} + +pub(crate) mod sealed { + use super::*; + + pub trait Instance { + const REGS: Regs; + } +} + +pub trait Instance: Peripheral

+ sealed::Instance + RccPeripheral {} + +pin_trait!(SckPin, Instance); +pin_trait!(D0Pin, Instance); +pin_trait!(D1Pin, Instance); +pin_trait!(D2Pin, Instance); +pin_trait!(D3Pin, Instance); +pin_trait!(NSSPin, Instance); + +dma_trait!(QuadDma, Instance); + +foreach_peripheral!( + (quadspi, $inst:ident) => { + impl sealed::Instance for peripherals::$inst { + const REGS: Regs = crate::pac::$inst; + } + + impl Instance for peripherals::$inst {} + }; +);