NaxdyOrg/embassy
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge pull request #1468 from rmja/assume-noise-free

Browse source 
Add assume_noise_free to usart configuration
This commit is contained in:
Dario Nieuwenhuis 2023-05-27 00:23:56 +02:00 committed by GitHub
commit bea42a78a4
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 37 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

43
embassy-stm32/src/usart/mod.rs
View file

@ -120,6 +120,12 @@ pub struct Config {
/// read will abort, the error reported and cleared
/// if false, the error is ignored and cleared
pub detect_previous_overrun: bool,
/// Set this to true if the line is considered noise free.
/// This will increase the receivers tolerance to clock deviations,
/// but will effectively disable noise detection.
#[cfg(not(usart_v1))]
pub assume_noise_free: bool,
}
impl Default for Config {
@ -131,6 +137,8 @@ impl Default for Config {
parity: Parity::ParityNone,
// historical behavior
detect_previous_overrun: false,
#[cfg(not(usart_v1))]
assume_noise_free: false,
}
}
}
@ -828,11 +836,17 @@ fn configure(r: Regs, config: &Config, pclk_freq: Hertz, kind: Kind, enable_rx:
#[cfg(not(usart_v1))]
let mut over8 = false;
let mut found = false;
let mut found = None;
for &(presc, _presc_val) in &DIVS {
let denom = (config.baudrate * presc as u32) as u64;
let div = (pclk_freq.0 as u64 * mul + (denom / 2)) / denom;
trace!("USART: presc={} div={:08x}", presc, div);
trace!(
"USART: presc={}, div=0x{:08x} (mantissa = {}, fraction = {})",
presc,
div,
div >> 4,
div & 0x0F
);
if div < brr_min {
#[cfg(not(usart_v1))]
@ -844,24 +858,36 @@ fn configure(r: Regs, config: &Config, pclk_freq: Hertz, kind: Kind, enable_rx:
#[cfg(usart_v4)]
r.presc().write(|w| w.set_prescaler(_presc_val));
}
found = true;
found = Some(div);
break;
}
panic!("USART: baudrate too high");
}
if div < brr_max {
let div = div as u32;
unsafe {
r.brr().write_value(regs::Brr(div as u32));
r.brr().write_value(regs::Brr(div));
#[cfg(usart_v4)]
r.presc().write(|w| w.set_prescaler(_presc_val));
}
found = true;
found = Some(div);
break;
}
}
assert!(found, "USART: baudrate too low");
let div = found.expect("USART: baudrate too low");
#[cfg(not(usart_v1))]
let oversampling = if over8 { "8 bit" } else { "16 bit" };
#[cfg(usart_v1)]
let oversampling = "default";
trace!(
"Using {} oversampling, desired baudrate: {}, actual baudrate: {}",
oversampling,
config.baudrate,
pclk_freq.0 / div
);
unsafe {
r.cr2().write(|w| {
@ -895,6 +921,11 @@ fn configure(r: Regs, config: &Config, pclk_freq: Hertz, kind: Kind, enable_rx:
#[cfg(not(usart_v1))]
w.set_over8(vals::Over8(over8 as _));
});
#[cfg(not(usart_v1))]
r.cr3().modify(|w| {
w.set_onebit(config.assume_noise_free);
});
}
}