NaxdyOrg/embassy
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

stm32/rcc: Modify only relevant CFGR bits and keep the settings previously done.

Browse source 
PLL settings remained intact because these bits are not writable when PLL is enabled,
but prescaler settings were overwritten by selecting PLL as sysclk (CFGR.SW[1:0]).
This commit is contained in:
Ralf 2022-05-11 20:56:57 +02:00
parent 1a216958ac
commit c90968bb70
1 changed files with 11 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

17
embassy-stm32/src/rcc/f3.rs
View file

@ -111,8 +111,9 @@ pub(crate) unsafe fn init(config: Config) {
});
// Enable HSE
// RM0316: "Bits 31:26 Reserved, must be kept at reset value."
if config.hse.is_some() {
RCC.cr().write(|w| {
RCC.cr().modify(|w| {
w.set_hsebyp(config.bypass_hse);
// We turn on clock security to switch to HSI when HSE fails
w.set_csson(true);
@ -122,27 +123,30 @@ pub(crate) unsafe fn init(config: Config) {
}
// Enable PLL
// RM0316: "Reserved, must be kept at reset value."
if let Some(ref pll_config) = pll_config {
RCC.cfgr().write(|w| {
RCC.cfgr().modify(|w| {
w.set_pllmul(pll_config.pll_mul);
w.set_pllsrc(pll_config.pll_src);
});
if let Some(pll_div) = pll_config.pll_div {
RCC.cfgr2().write(|w| w.set_prediv(pll_div));
RCC.cfgr2().modify(|w| w.set_prediv(pll_div));
}
RCC.cr().modify(|w| w.set_pllon(true));
while !RCC.cr().read().pllrdy() {}
}
// CFGR has been written before (PLL) don't overwrite these settings
if config.pll48 {
let usb_pre = get_usb_pre(&config, sysclk, pclk1, &pll_config);
RCC.cfgr().write(|w| {
RCC.cfgr().modify(|w| {
w.set_usbpre(usb_pre);
});
}
// Set prescalers
RCC.cfgr().write(|w| {
// CFGR has been written before (PLL, PLL48) don't overwrite these settings
RCC.cfgr().modify(|w| {
w.set_ppre2(ppre2_bits);
w.set_ppre1(ppre1_bits);
w.set_hpre(hpre_bits);
@ -153,7 +157,8 @@ pub(crate) unsafe fn init(config: Config) {
// 1 to 16 AHB cycles after write"
cortex_m::asm::delay(16);
RCC.cfgr().write(|w| {
// CFGR has been written before (PLL, PLL48, clock divider) don't overwrite these settings
RCC.cfgr().modify(|w| {
w.set_sw(match (pll_config, config.hse) {
(Some(_), _) => Sw::PLL,
(None, Some(_)) => Sw::HSE,