NaxdyOrg/embassy
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
Modern embedded framework, using Rust and async.
50 commits 3 branches 0 tags 16 MiB
Rust 98.8%
Shell 0.9%
Python 0.2%
Find a file
Daniel Bevenius 483edf694b Introduce IoctlType enum for IOCTL types 
This commit introduces an enum to represent the IOCTL command types
available, the direction of the data transfer (Get and Set).
2022-09-22 14:12:07 +02:00
.vscode Get wifi credentials from envvars in example. 2022-07-21 23:50:40 +02:00
examples/rpi-pico-w Update Embassy. 2022-08-23 01:06:14 +02:00
firmware Obtain the firmware blobs from the user instead of hardcoding magic flash addrs. 2022-07-17 00:33:30 +02:00
src Introduce IoctlType enum for IOCTL types 2022-09-22 14:12:07 +02:00
.gitignore Obtain the firmware blobs from the user instead of hardcoding magic flash addrs. 2022-07-17 00:33:30 +02:00
Cargo.toml Update Embassy. 2022-08-23 01:06:14 +02:00
LICENSE-APACHE Add LICENSEs 2022-07-11 22:53:57 +02:00
LICENSE-MIT Add LICENSEs 2022-07-11 22:53:57 +02:00
README.md Get wifi credentials from envvars in example. 2022-07-21 23:50:40 +02:00
rust-toolchain.toml update rust nightly to match embassy. 2022-07-13 21:22:52 +02:00
rustfmt.toml 🌈 2022-07-10 19:45:26 +02:00

README.md

cyw43

WIP driver for the CYW43439 wifi chip, used in the Raspberry Pi Pico W. Implementation based on Infineon/wifi-host-driver.

Current status

Working:

  • Station mode (joining an AP).
  • Sending and receiving Ethernet frames.
  • Using the default MAC address.
  • embassy-net integration.

TODO:

  • AP mode (creating an AP)
  • GPIO support (used for the Pico W LED)
  • Scanning
  • Setting a custom MAC address.
  • RP2040 PIO driver for the nonstandard half-duplex SPI used in the Pico W. Probably porting this. (Currently bitbanging is used).
  • Using the IRQ pin instead of polling the bus.
  • Bus sleep (unclear what the benefit is. Is it needed for IRQs? or is it just power consumption optimization?)

Running the example

  • cargo install probe-run
  • cd examples/rpi-pico-w
  • WIFI_NETWORK=MyWifiNetwork WIFI_PASSWORD=MyWifiPassword cargo run --release

After a few seconds, you should see that DHCP picks up an IP address like this

11.944489 DEBUG Acquired IP configuration:
11.944517 DEBUG    IP address:      192.168.0.250/24
11.944620 DEBUG    Default gateway: 192.168.0.33
11.944722 DEBUG    DNS server 0:    192.168.0.33

The example implements a TCP echo server on port 1234. You can try connecting to it with:

nc 192.168.0.250 1234

Send it some data, you should see it echoed back and printed in the firmware's logs.

License

This work is licensed under either of

at your option.