Merge pull request #1512 from embassy-rs/cyw43

Merge cyw43 into main repo

ci.sh

@@ -5,6 +5,10 @@ set -euo pipefail
 export RUSTFLAGS=-Dwarnings
 export DEFMT_LOG=trace
 
+# needed by wifi examples
+export WIFI_NETWORK=x
+export WIFI_PASSWORD=x
+
 TARGET=$(rustc -vV | sed -n 's|host: ||p')
 
 BUILD_EXTRA=""
@@ -82,6 +86,13 @@ cargo batch  \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f100c4,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32h503rb,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32h562ag,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path cyw43/Cargo.toml --target thumbv6m-none-eabi --features ''\
+    --- build --release --manifest-path cyw43/Cargo.toml --target thumbv6m-none-eabi --features 'log' \
+    --- build --release --manifest-path cyw43/Cargo.toml --target thumbv6m-none-eabi --features 'defmt' \
+    --- build --release --manifest-path cyw43/Cargo.toml --target thumbv6m-none-eabi --features 'log,firmware-logs' \
+    --- build --release --manifest-path cyw43/Cargo.toml --target thumbv6m-none-eabi --features 'defmt,firmware-logs' \
+    --- build --release --manifest-path cyw43-pio/Cargo.toml --target thumbv6m-none-eabi --features '' \
+    --- build --release --manifest-path cyw43-pio/Cargo.toml --target thumbv6m-none-eabi --features 'overclock' \
     --- build --release --manifest-path embassy-boot/nrf/Cargo.toml --target thumbv7em-none-eabi --features embassy-nrf/nrf52840,nightly \
     --- build --release --manifest-path embassy-boot/nrf/Cargo.toml --target thumbv8m.main-none-eabihf --features embassy-nrf/nrf9160-ns,nightly \
     --- build --release --manifest-path embassy-boot/rp/Cargo.toml --target thumbv6m-none-eabi --features nightly \

cyw43-firmware/LICENSE-permissive-binary-license-1.0.txt

@@ -0,0 +1,49 @@
+Permissive Binary License
+
+Version 1.0, July 2019
+
+Redistribution.  Redistribution and use in binary form, without
+modification, are permitted provided that the following conditions are
+met:
+
+1) Redistributions must reproduce the above copyright notice and the
+   following disclaimer in the documentation and/or other materials
+   provided with the distribution.
+
+2) Unless to the extent explicitly permitted by law, no reverse
+   engineering, decompilation, or disassembly of this software is
+   permitted.
+
+3) Redistribution as part of a software development kit must include the
+   accompanying file named <20>DEPENDENCIES<45> and any dependencies listed in
+   that file.
+
+4) Neither the name of the copyright holder nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+Limited patent license. The copyright holders (and contributors) grant a
+worldwide, non-exclusive, no-charge, royalty-free patent license to
+make, have made, use, offer to sell, sell, import, and otherwise
+transfer this software, where such license applies only to those patent
+claims licensable by the copyright holders (and contributors) that are
+necessarily infringed by this software. This patent license shall not
+apply to any combinations that include this software.  No hardware is
+licensed hereunder.
+
+If you institute patent litigation against any entity (including a
+cross-claim or counterclaim in a lawsuit) alleging that the software
+itself infringes your patent(s), then your rights granted under this
+license shall terminate as of the date such litigation is filed.
+
+DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+CONTRIBUTORS "AS IS." ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
+NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

cyw43-firmware/README.md

@@ -0,0 +1,5 @@
+# WiFi firmware
+
+Firmware obtained from https://github.com/Infineon/wifi-host-driver/tree/master/WiFi_Host_Driver/resources/firmware/COMPONENT_43439
+
+Licensed under the [Infineon Permissive Binary License](./LICENSE-permissive-binary-license-1.0.txt)

cyw43-pio/Cargo.toml

@@ -0,0 +1,17 @@
+[package]
+name = "cyw43-pio"
+version = "0.1.0"
+edition = "2021"
+
+[features]
+# If disabled, SPI runs at 31.25MHz
+# If enabled, SPI runs at 62.5MHz, which is 25% higher than 50Mhz which is the maximum according to the CYW43439 datasheet.
+overclock = []
+
+[dependencies]
+cyw43 = { version = "0.1.0", path = "../cyw43" }
+embassy-rp = { version = "0.1.0", path = "../embassy-rp" }
+pio-proc = "0.2"
+pio = "0.2.1"
+fixed = "1.23.1"
+defmt = { version = "0.3", optional = true }

cyw43-pio/src/lib.rs

@@ -0,0 +1,229 @@
+#![no_std]
+#![allow(incomplete_features)]
+#![feature(async_fn_in_trait)]
+
+use core::slice;
+
+use cyw43::SpiBusCyw43;
+use embassy_rp::dma::Channel;
+use embassy_rp::gpio::{Drive, Level, Output, Pin, Pull, SlewRate};
+use embassy_rp::pio::{Common, Config, Direction, Instance, Irq, PioPin, ShiftDirection, StateMachine};
+use embassy_rp::relocate::RelocatedProgram;
+use embassy_rp::{pio_instr_util, Peripheral, PeripheralRef};
+use fixed::FixedU32;
+use pio_proc::pio_asm;
+
+pub struct PioSpi<'d, CS: Pin, PIO: Instance, const SM: usize, DMA> {
+    cs: Output<'d, CS>,
+    sm: StateMachine<'d, PIO, SM>,
+    irq: Irq<'d, PIO, 0>,
+    dma: PeripheralRef<'d, DMA>,
+    wrap_target: u8,
+}
+
+impl<'d, CS, PIO, const SM: usize, DMA> PioSpi<'d, CS, PIO, SM, DMA>
+where
+    DMA: Channel,
+    CS: Pin,
+    PIO: Instance,
+{
+    pub fn new<DIO, CLK>(
+        common: &mut Common<'d, PIO>,
+        mut sm: StateMachine<'d, PIO, SM>,
+        irq: Irq<'d, PIO, 0>,
+        cs: Output<'d, CS>,
+        dio: DIO,
+        clk: CLK,
+        dma: impl Peripheral<P = DMA> + 'd,
+    ) -> Self
+    where
+        DIO: PioPin,
+        CLK: PioPin,
+    {
+        #[cfg(feature = "overclock")]
+        let program = pio_asm!(
+            ".side_set 1"
+
+            ".wrap_target"
+            // write out x-1 bits
+            "lp:"
+            "out pins, 1    side 0"
+            "jmp x-- lp     side 1"
+            // switch directions
+            "set pindirs, 0 side 0"
+            "nop            side 1"  // necessary for clkdiv=1.
+            "nop            side 0"
+            // read in y-1 bits
+            "lp2:"
+            "in pins, 1     side 1"
+            "jmp y-- lp2    side 0"
+
+            // wait for event and irq host
+            "wait 1 pin 0   side 0"
+            "irq 0          side 0"
+
+            ".wrap"
+        );
+        #[cfg(not(feature = "overclock"))]
+        let program = pio_asm!(
+            ".side_set 1"
+
+            ".wrap_target"
+            // write out x-1 bits
+            "lp:"
+            "out pins, 1    side 0"
+            "jmp x-- lp     side 1"
+            // switch directions
+            "set pindirs, 0 side 0"
+            "nop            side 0"
+            // read in y-1 bits
+            "lp2:"
+            "in pins, 1     side 1"
+            "jmp y-- lp2    side 0"
+
+            // wait for event and irq host
+            "wait 1 pin 0   side 0"
+            "irq 0          side 0"
+
+            ".wrap"
+        );
+
+        let relocated = RelocatedProgram::new(&program.program);
+
+        let mut pin_io: embassy_rp::pio::Pin<PIO> = common.make_pio_pin(dio);
+        pin_io.set_pull(Pull::None);
+        pin_io.set_schmitt(true);
+        pin_io.set_input_sync_bypass(true);
+        pin_io.set_drive_strength(Drive::_12mA);
+        pin_io.set_slew_rate(SlewRate::Fast);
+
+        let mut pin_clk = common.make_pio_pin(clk);
+        pin_clk.set_drive_strength(Drive::_12mA);
+        pin_clk.set_slew_rate(SlewRate::Fast);
+
+        let mut cfg = Config::default();
+        cfg.use_program(&common.load_program(&relocated), &[&pin_clk]);
+        cfg.set_out_pins(&[&pin_io]);
+        cfg.set_in_pins(&[&pin_io]);
+        cfg.set_set_pins(&[&pin_io]);
+        cfg.shift_out.direction = ShiftDirection::Left;
+        cfg.shift_out.auto_fill = true;
+        //cfg.shift_out.threshold = 32;
+        cfg.shift_in.direction = ShiftDirection::Left;
+        cfg.shift_in.auto_fill = true;
+        //cfg.shift_in.threshold = 32;
+
+        #[cfg(feature = "overclock")]
+        {
+            // 125mhz Pio => 62.5Mhz SPI Freq. 25% higher than theoretical maximum according to
+            // data sheet, but seems to work fine.
+            cfg.clock_divider = FixedU32::from_bits(0x0100);
+        }
+
+        #[cfg(not(feature = "overclock"))]
+        {
+            // same speed as pico-sdk, 62.5Mhz
+            // This is actually the fastest we can go without overclocking.
+            // According to data sheet, the theoretical maximum is 100Mhz Pio => 50Mhz SPI Freq.
+            // However, the PIO uses a fractional divider, which works by introducing jitter when
+            // the divider is not an integer. It does some clocks at 125mhz and others at 62.5mhz
+            // so that it averages out to the desired frequency of 100mhz. The 125mhz clock cycles
+            // violate the maximum from the data sheet.
+            cfg.clock_divider = FixedU32::from_bits(0x0200);
+        }
+
+        sm.set_config(&cfg);
+
+        sm.set_pin_dirs(Direction::Out, &[&pin_clk, &pin_io]);
+        sm.set_pins(Level::Low, &[&pin_clk, &pin_io]);
+
+        Self {
+            cs,
+            sm,
+            irq,
+            dma: dma.into_ref(),
+            wrap_target: relocated.wrap().target,
+        }
+    }
+
+    pub async fn write(&mut self, write: &[u32]) -> u32 {
+        self.sm.set_enable(false);
+        let write_bits = write.len() * 32 - 1;
+        let read_bits = 31;
+
+        #[cfg(feature = "defmt")]
+        defmt::trace!("write={} read={}", write_bits, read_bits);
+
+        unsafe {
+            pio_instr_util::set_x(&mut self.sm, write_bits as u32);
+            pio_instr_util::set_y(&mut self.sm, read_bits as u32);
+            pio_instr_util::set_pindir(&mut self.sm, 0b1);
+            pio_instr_util::exec_jmp(&mut self.sm, self.wrap_target);
+        }
+
+        self.sm.set_enable(true);
+
+        self.sm.tx().dma_push(self.dma.reborrow(), write).await;
+
+        let mut status = 0;
+        self.sm
+            .rx()
+            .dma_pull(self.dma.reborrow(), slice::from_mut(&mut status))
+            .await;
+        status
+    }
+
+    pub async fn cmd_read(&mut self, cmd: u32, read: &mut [u32]) -> u32 {
+        self.sm.set_enable(false);
+        let write_bits = 31;
+        let read_bits = read.len() * 32 + 32 - 1;
+
+        #[cfg(feature = "defmt")]
+        defmt::trace!("write={} read={}", write_bits, read_bits);
+
+        unsafe {
+            pio_instr_util::set_y(&mut self.sm, read_bits as u32);
+            pio_instr_util::set_x(&mut self.sm, write_bits as u32);
+            pio_instr_util::set_pindir(&mut self.sm, 0b1);
+            pio_instr_util::exec_jmp(&mut self.sm, self.wrap_target);
+        }
+
+        // self.cs.set_low();
+        self.sm.set_enable(true);
+
+        self.sm.tx().dma_push(self.dma.reborrow(), slice::from_ref(&cmd)).await;
+        self.sm.rx().dma_pull(self.dma.reborrow(), read).await;
+
+        let mut status = 0;
+        self.sm
+            .rx()
+            .dma_pull(self.dma.reborrow(), slice::from_mut(&mut status))
+            .await;
+        status
+    }
+}
+
+impl<'d, CS, PIO, const SM: usize, DMA> SpiBusCyw43 for PioSpi<'d, CS, PIO, SM, DMA>
+where
+    CS: Pin,
+    PIO: Instance,
+    DMA: Channel,
+{
+    async fn cmd_write(&mut self, write: &[u32]) -> u32 {
+        self.cs.set_low();
+        let status = self.write(write).await;
+        self.cs.set_high();
+        status
+    }
+
+    async fn cmd_read(&mut self, write: u32, read: &mut [u32]) -> u32 {
+        self.cs.set_low();
+        let status = self.cmd_read(write, read).await;
+        self.cs.set_high();
+        status
+    }
+
+    async fn wait_for_event(&mut self) {
+        self.irq.wait().await;
+    }
+}

cyw43/Cargo.toml

@@ -0,0 +1,28 @@
+[package]
+name = "cyw43"
+version = "0.1.0"
+edition = "2021"
+
+[features]
+defmt = ["dep:defmt"]
+log = ["dep:log"]
+
+# Fetch console logs from the WiFi firmware and forward them to `log` or `defmt`.
+firmware-logs = []
+
+[dependencies]
+embassy-time = { version = "0.1.0", path = "../embassy-time"}
+embassy-sync = { version = "0.2.0", path = "../embassy-sync"}
+embassy-futures = { version = "0.1.0", path = "../embassy-futures"}
+embassy-net-driver-channel = { version = "0.1.0", path = "../embassy-net-driver-channel"}
+atomic-polyfill = "0.1.5"
+
+defmt = { version = "0.3", optional = true }
+log = { version = "0.4.17", optional = true }
+
+cortex-m = "0.7.6"
+cortex-m-rt = "0.7.0"
+futures = { version = "0.3.17", default-features = false, features = ["async-await", "cfg-target-has-atomic", "unstable"] }
+
+embedded-hal-1 = { package = "embedded-hal", version = "1.0.0-alpha.10" }
+num_enum = { version = "0.5.7", default-features = false }

cyw43/README.md

@@ -0,0 +1,57 @@
+# cyw43
+
+WIP driver for the CYW43439 wifi chip, used in the Raspberry Pi Pico W. Implementation based on [Infineon/wifi-host-driver](https://github.com/Infineon/wifi-host-driver).
+
+## Current status
+
+Working:
+
+- Station mode (joining an AP).
+- AP mode (creating an AP)
+- Scanning
+- Sending and receiving Ethernet frames.
+- Using the default MAC address.
+- [`embassy-net`](https://embassy.dev) integration.
+- RP2040 PIO driver for the nonstandard half-duplex SPI used in the Pico W.
+- Using IRQ for device events
+- GPIO support (for LED on the Pico W)
+
+TODO:
+
+- Setting a custom MAC address.
+- Bus sleep (unclear what the benefit is. Is it needed for IRQs? or is it just power consumption optimization?)
+
+## Running the examples
+
+- `cargo install probe-rs-cli`
+- `cd examples/rpi-pico-w`
+### Example 1: Scan the wifi stations
+- `cargo run --release --bin wifi_scan`
+### Example 2: Create an access point (IP and credentials in the code)
+- `cargo run --release --bin tcp_server_ap`
+### Example 3: Connect to an existing network and create a server
+- `WIFI_NETWORK=MyWifiNetwork WIFI_PASSWORD=MyWifiPassword cargo run --release`
+
+After a few seconds, you should see that DHCP picks up an IP address like this
+```
+11.944489 DEBUG Acquired IP configuration:
+11.944517 DEBUG    IP address:      192.168.0.250/24
+11.944620 DEBUG    Default gateway: 192.168.0.33
+11.944722 DEBUG    DNS server 0:    192.168.0.33
+```
+This example implements a TCP echo server on port 1234. You can try connecting to it with:
+```
+nc 192.168.0.250 1234
+```
+Send it some data, you should see it echoed back and printed in the firmware's logs.
+
+## License
+
+This work is licensed under either of
+
+- Apache License, Version 2.0 ([LICENSE-APACHE](LICENSE-APACHE) or
+  <http://www.apache.org/licenses/LICENSE-2.0>)
+- MIT license ([LICENSE-MIT](LICENSE-MIT) or <http://opensource.org/licenses/MIT>)
+
+at your option.
+

cyw43/src/bus.rs

@@ -0,0 +1,328 @@
+use embassy_futures::yield_now;
+use embassy_time::{Duration, Timer};
+use embedded_hal_1::digital::OutputPin;
+use futures::FutureExt;
+
+use crate::consts::*;
+use crate::slice8_mut;
+
+/// Custom Spi Trait that _only_ supports the bus operation of the cyw43
+/// Implementors are expected to hold the CS pin low during an operation.
+pub trait SpiBusCyw43 {
+    /// Issues a write command on the bus
+    /// First 32 bits of `word` are expected to be a cmd word
+    async fn cmd_write(&mut self, write: &[u32]) -> u32;
+
+    /// Issues a read command on the bus
+    /// `write` is expected to be a 32 bit cmd word
+    /// `read` will contain the response of the device
+    /// Backplane reads have a response delay that produces one extra unspecified word at the beginning of `read`.
+    /// Callers that want to read `n` word from the backplane, have to provide a slice that is `n+1` words long.
+    async fn cmd_read(&mut self, write: u32, read: &mut [u32]) -> u32;
+
+    /// Wait for events from the Device. A typical implementation would wait for the IRQ pin to be high.
+    /// The default implementation always reports ready, resulting in active polling of the device.
+    async fn wait_for_event(&mut self) {
+        yield_now().await;
+    }
+}
+
+pub(crate) struct Bus<PWR, SPI> {
+    backplane_window: u32,
+    pwr: PWR,
+    spi: SPI,
+    status: u32,
+}
+
+impl<PWR, SPI> Bus<PWR, SPI>
+where
+    PWR: OutputPin,
+    SPI: SpiBusCyw43,
+{
+    pub(crate) fn new(pwr: PWR, spi: SPI) -> Self {
+        Self {
+            backplane_window: 0xAAAA_AAAA,
+            pwr,
+            spi,
+            status: 0,
+        }
+    }
+
+    pub async fn init(&mut self) {
+        // Reset
+        self.pwr.set_low().unwrap();
+        Timer::after(Duration::from_millis(20)).await;
+        self.pwr.set_high().unwrap();
+        Timer::after(Duration::from_millis(250)).await;
+
+        while self
+            .read32_swapped(REG_BUS_TEST_RO)
+            .inspect(|v| trace!("{:#x}", v))
+            .await
+            != FEEDBEAD
+        {}
+
+        self.write32_swapped(REG_BUS_TEST_RW, TEST_PATTERN).await;
+        let val = self.read32_swapped(REG_BUS_TEST_RW).await;
+        trace!("{:#x}", val);
+        assert_eq!(val, TEST_PATTERN);
+
+        let val = self.read32_swapped(REG_BUS_CTRL).await;
+        trace!("{:#010b}", (val & 0xff));
+
+        // 32-bit word length, little endian (which is the default endianess).
+        self.write32_swapped(
+            REG_BUS_CTRL,
+            WORD_LENGTH_32 | HIGH_SPEED | INTERRUPT_HIGH | WAKE_UP | STATUS_ENABLE | INTERRUPT_WITH_STATUS,
+        )
+        .await;
+
+        let val = self.read8(FUNC_BUS, REG_BUS_CTRL).await;
+        trace!("{:#b}", val);
+
+        let val = self.read32(FUNC_BUS, REG_BUS_TEST_RO).await;
+        trace!("{:#x}", val);
+        assert_eq!(val, FEEDBEAD);
+        let val = self.read32(FUNC_BUS, REG_BUS_TEST_RW).await;
+        trace!("{:#x}", val);
+        assert_eq!(val, TEST_PATTERN);
+    }
+
+    pub async fn wlan_read(&mut self, buf: &mut [u32], len_in_u8: u32) {
+        let cmd = cmd_word(READ, INC_ADDR, FUNC_WLAN, 0, len_in_u8);
+        let len_in_u32 = (len_in_u8 as usize + 3) / 4;
+
+        self.status = self.spi.cmd_read(cmd, &mut buf[..len_in_u32]).await;
+    }
+
+    pub async fn wlan_write(&mut self, buf: &[u32]) {
+        let cmd = cmd_word(WRITE, INC_ADDR, FUNC_WLAN, 0, buf.len() as u32 * 4);
+        //TODO try to remove copy?
+        let mut cmd_buf = [0_u32; 513];
+        cmd_buf[0] = cmd;
+        cmd_buf[1..][..buf.len()].copy_from_slice(buf);
+
+        self.status = self.spi.cmd_write(&cmd_buf).await;
+    }
+
+    #[allow(unused)]
+    pub async fn bp_read(&mut self, mut addr: u32, mut data: &mut [u8]) {
+        // It seems the HW force-aligns the addr
+        // to 2 if data.len() >= 2
+        // to 4 if data.len() >= 4
+        // To simplify, enforce 4-align for now.
+        assert!(addr % 4 == 0);
+
+        // Backplane read buffer has one extra word for the response delay.
+        let mut buf = [0u32; BACKPLANE_MAX_TRANSFER_SIZE / 4 + 1];
+
+        while !data.is_empty() {
+            // Ensure transfer doesn't cross a window boundary.
+            let window_offs = addr & BACKPLANE_ADDRESS_MASK;
+            let window_remaining = BACKPLANE_WINDOW_SIZE - window_offs as usize;
+
+            let len = data.len().min(BACKPLANE_MAX_TRANSFER_SIZE).min(window_remaining);
+
+            self.backplane_set_window(addr).await;
+
+            let cmd = cmd_word(READ, INC_ADDR, FUNC_BACKPLANE, window_offs, len as u32);
+
+            // round `buf` to word boundary, add one extra word for the response delay
+            self.status = self.spi.cmd_read(cmd, &mut buf[..(len + 3) / 4 + 1]).await;
+
+            // when writing out the data, we skip the response-delay byte
+            data[..len].copy_from_slice(&slice8_mut(&mut buf[1..])[..len]);
+
+            // Advance ptr.
+            addr += len as u32;
+            data = &mut data[len..];
+        }
+    }
+
+    pub async fn bp_write(&mut self, mut addr: u32, mut data: &[u8]) {
+        // It seems the HW force-aligns the addr
+        // to 2 if data.len() >= 2
+        // to 4 if data.len() >= 4
+        // To simplify, enforce 4-align for now.
+        assert!(addr % 4 == 0);
+
+        let mut buf = [0u32; BACKPLANE_MAX_TRANSFER_SIZE / 4 + 1];
+
+        while !data.is_empty() {
+            // Ensure transfer doesn't cross a window boundary.
+            let window_offs = addr & BACKPLANE_ADDRESS_MASK;
+            let window_remaining = BACKPLANE_WINDOW_SIZE - window_offs as usize;
+
+            let len = data.len().min(BACKPLANE_MAX_TRANSFER_SIZE).min(window_remaining);
+            slice8_mut(&mut buf[1..])[..len].copy_from_slice(&data[..len]);
+
+            self.backplane_set_window(addr).await;
+
+            let cmd = cmd_word(WRITE, INC_ADDR, FUNC_BACKPLANE, window_offs, len as u32);
+            buf[0] = cmd;
+
+            self.status = self.spi.cmd_write(&buf[..(len + 3) / 4 + 1]).await;
+
+            // Advance ptr.
+            addr += len as u32;
+            data = &data[len..];
+        }
+    }
+
+    pub async fn bp_read8(&mut self, addr: u32) -> u8 {
+        self.backplane_readn(addr, 1).await as u8
+    }
+
+    pub async fn bp_write8(&mut self, addr: u32, val: u8) {
+        self.backplane_writen(addr, val as u32, 1).await
+    }
+
+    pub async fn bp_read16(&mut self, addr: u32) -> u16 {
+        self.backplane_readn(addr, 2).await as u16
+    }
+
+    #[allow(unused)]
+    pub async fn bp_write16(&mut self, addr: u32, val: u16) {
+        self.backplane_writen(addr, val as u32, 2).await
+    }
+
+    #[allow(unused)]
+    pub async fn bp_read32(&mut self, addr: u32) -> u32 {
+        self.backplane_readn(addr, 4).await
+    }
+
+    pub async fn bp_write32(&mut self, addr: u32, val: u32) {
+        self.backplane_writen(addr, val, 4).await
+    }
+
+    async fn backplane_readn(&mut self, addr: u32, len: u32) -> u32 {
+        self.backplane_set_window(addr).await;
+
+        let mut bus_addr = addr & BACKPLANE_ADDRESS_MASK;
+        if len == 4 {
+            bus_addr |= BACKPLANE_ADDRESS_32BIT_FLAG
+        }
+        self.readn(FUNC_BACKPLANE, bus_addr, len).await
+    }
+
+    async fn backplane_writen(&mut self, addr: u32, val: u32, len: u32) {
+        self.backplane_set_window(addr).await;
+
+        let mut bus_addr = addr & BACKPLANE_ADDRESS_MASK;
+        if len == 4 {
+            bus_addr |= BACKPLANE_ADDRESS_32BIT_FLAG
+        }
+        self.writen(FUNC_BACKPLANE, bus_addr, val, len).await
+    }
+
+    async fn backplane_set_window(&mut self, addr: u32) {
+        let new_window = addr & !BACKPLANE_ADDRESS_MASK;
+
+        if (new_window >> 24) as u8 != (self.backplane_window >> 24) as u8 {
+            self.write8(
+                FUNC_BACKPLANE,
+                REG_BACKPLANE_BACKPLANE_ADDRESS_HIGH,
+                (new_window >> 24) as u8,
+            )
+            .await;
+        }
+        if (new_window >> 16) as u8 != (self.backplane_window >> 16) as u8 {
+            self.write8(
+                FUNC_BACKPLANE,
+                REG_BACKPLANE_BACKPLANE_ADDRESS_MID,
+                (new_window >> 16) as u8,
+            )
+            .await;
+        }
+        if (new_window >> 8) as u8 != (self.backplane_window >> 8) as u8 {
+            self.write8(
+                FUNC_BACKPLANE,
+                REG_BACKPLANE_BACKPLANE_ADDRESS_LOW,
+                (new_window >> 8) as u8,
+            )
+            .await;
+        }
+        self.backplane_window = new_window;
+    }
+
+    pub async fn read8(&mut self, func: u32, addr: u32) -> u8 {
+        self.readn(func, addr, 1).await as u8
+    }
+
+    pub async fn write8(&mut self, func: u32, addr: u32, val: u8) {
+        self.writen(func, addr, val as u32, 1).await
+    }
+
+    pub async fn read16(&mut self, func: u32, addr: u32) -> u16 {
+        self.readn(func, addr, 2).await as u16
+    }
+
+    #[allow(unused)]
+    pub async fn write16(&mut self, func: u32, addr: u32, val: u16) {
+        self.writen(func, addr, val as u32, 2).await
+    }
+
+    pub async fn read32(&mut self, func: u32, addr: u32) -> u32 {
+        self.readn(func, addr, 4).await
+    }
+
+    #[allow(unused)]
+    pub async fn write32(&mut self, func: u32, addr: u32, val: u32) {
+        self.writen(func, addr, val, 4).await
+    }
+
+    async fn readn(&mut self, func: u32, addr: u32, len: u32) -> u32 {
+        let cmd = cmd_word(READ, INC_ADDR, func, addr, len);
+        let mut buf = [0; 2];
+        // if we are reading from the backplane, we need an extra word for the response delay
+        let len = if func == FUNC_BACKPLANE { 2 } else { 1 };
+
+        self.status = self.spi.cmd_read(cmd, &mut buf[..len]).await;
+
+        // if we read from the backplane, the result is in the second word, after the response delay
+        if func == FUNC_BACKPLANE {
+            buf[1]
+        } else {
+            buf[0]
+        }
+    }
+
+    async fn writen(&mut self, func: u32, addr: u32, val: u32, len: u32) {
+        let cmd = cmd_word(WRITE, INC_ADDR, func, addr, len);
+
+        self.status = self.spi.cmd_write(&[cmd, val]).await;
+    }
+
+    async fn read32_swapped(&mut self, addr: u32) -> u32 {
+        let cmd = cmd_word(READ, INC_ADDR, FUNC_BUS, addr, 4);
+        let cmd = swap16(cmd);
+        let mut buf = [0; 1];
+
+        self.status = self.spi.cmd_read(cmd, &mut buf).await;
+
+        swap16(buf[0])
+    }
+
+    async fn write32_swapped(&mut self, addr: u32, val: u32) {
+        let cmd = cmd_word(WRITE, INC_ADDR, FUNC_BUS, addr, 4);
+        let buf = [swap16(cmd), swap16(val)];
+
+        self.status = self.spi.cmd_write(&buf).await;
+    }
+
+    pub async fn wait_for_event(&mut self) {
+        self.spi.wait_for_event().await;
+    }
+
+    pub fn status(&self) -> u32 {
+        self.status
+    }
+}
+
+fn swap16(x: u32) -> u32 {
+    x.rotate_left(16)
+}
+
+fn cmd_word(write: bool, incr: bool, func: u32, addr: u32, len: u32) -> u32 {
+    (write as u32) << 31 | (incr as u32) << 30 | (func & 0b11) << 28 | (addr & 0x1FFFF) << 11 | (len & 0x7FF)
+}

cyw43/src/consts.rs

@@ -0,0 +1,318 @@
+#![allow(unused)]
+
+pub(crate) const FUNC_BUS: u32 = 0;
+pub(crate) const FUNC_BACKPLANE: u32 = 1;
+pub(crate) const FUNC_WLAN: u32 = 2;
+pub(crate) const FUNC_BT: u32 = 3;
+
+pub(crate) const REG_BUS_CTRL: u32 = 0x0;
+pub(crate) const REG_BUS_INTERRUPT: u32 = 0x04; // 16 bits - Interrupt status
+pub(crate) const REG_BUS_INTERRUPT_ENABLE: u32 = 0x06; // 16 bits - Interrupt mask
+pub(crate) const REG_BUS_STATUS: u32 = 0x8;
+pub(crate) const REG_BUS_TEST_RO: u32 = 0x14;
+pub(crate) const REG_BUS_TEST_RW: u32 = 0x18;
+pub(crate) const REG_BUS_RESP_DELAY: u32 = 0x1c;
+pub(crate) const WORD_LENGTH_32: u32 = 0x1;
+pub(crate) const HIGH_SPEED: u32 = 0x10;
+pub(crate) const INTERRUPT_HIGH: u32 = 1 << 5;
+pub(crate) const WAKE_UP: u32 = 1 << 7;
+pub(crate) const STATUS_ENABLE: u32 = 1 << 16;
+pub(crate) const INTERRUPT_WITH_STATUS: u32 = 1 << 17;
+
+// SPI_STATUS_REGISTER bits
+pub(crate) const STATUS_DATA_NOT_AVAILABLE: u32 = 0x00000001;
+pub(crate) const STATUS_UNDERFLOW: u32 = 0x00000002;
+pub(crate) const STATUS_OVERFLOW: u32 = 0x00000004;
+pub(crate) const STATUS_F2_INTR: u32 = 0x00000008;
+pub(crate) const STATUS_F3_INTR: u32 = 0x00000010;
+pub(crate) const STATUS_F2_RX_READY: u32 = 0x00000020;
+pub(crate) const STATUS_F3_RX_READY: u32 = 0x00000040;
+pub(crate) const STATUS_HOST_CMD_DATA_ERR: u32 = 0x00000080;
+pub(crate) const STATUS_F2_PKT_AVAILABLE: u32 = 0x00000100;
+pub(crate) const STATUS_F2_PKT_LEN_MASK: u32 = 0x000FFE00;
+pub(crate) const STATUS_F2_PKT_LEN_SHIFT: u32 = 9;
+pub(crate) const STATUS_F3_PKT_AVAILABLE: u32 = 0x00100000;
+pub(crate) const STATUS_F3_PKT_LEN_MASK: u32 = 0xFFE00000;
+pub(crate) const STATUS_F3_PKT_LEN_SHIFT: u32 = 21;
+
+pub(crate) const REG_BACKPLANE_GPIO_SELECT: u32 = 0x10005;
+pub(crate) const REG_BACKPLANE_GPIO_OUTPUT: u32 = 0x10006;
+pub(crate) const REG_BACKPLANE_GPIO_ENABLE: u32 = 0x10007;
+pub(crate) const REG_BACKPLANE_FUNCTION2_WATERMARK: u32 = 0x10008;
+pub(crate) const REG_BACKPLANE_DEVICE_CONTROL: u32 = 0x10009;
+pub(crate) const REG_BACKPLANE_BACKPLANE_ADDRESS_LOW: u32 = 0x1000A;
+pub(crate) const REG_BACKPLANE_BACKPLANE_ADDRESS_MID: u32 = 0x1000B;
+pub(crate) const REG_BACKPLANE_BACKPLANE_ADDRESS_HIGH: u32 = 0x1000C;
+pub(crate) const REG_BACKPLANE_FRAME_CONTROL: u32 = 0x1000D;
+pub(crate) const REG_BACKPLANE_CHIP_CLOCK_CSR: u32 = 0x1000E;
+pub(crate) const REG_BACKPLANE_PULL_UP: u32 = 0x1000F;
+pub(crate) const REG_BACKPLANE_READ_FRAME_BC_LOW: u32 = 0x1001B;
+pub(crate) const REG_BACKPLANE_READ_FRAME_BC_HIGH: u32 = 0x1001C;
+pub(crate) const REG_BACKPLANE_WAKEUP_CTRL: u32 = 0x1001E;
+pub(crate) const REG_BACKPLANE_SLEEP_CSR: u32 = 0x1001F;
+
+pub(crate) const BACKPLANE_WINDOW_SIZE: usize = 0x8000;
+pub(crate) const BACKPLANE_ADDRESS_MASK: u32 = 0x7FFF;
+pub(crate) const BACKPLANE_ADDRESS_32BIT_FLAG: u32 = 0x08000;
+pub(crate) const BACKPLANE_MAX_TRANSFER_SIZE: usize = 64;
+// Active Low Power (ALP) clock constants
+pub(crate) const BACKPLANE_ALP_AVAIL_REQ: u8 = 0x08;
+pub(crate) const BACKPLANE_ALP_AVAIL: u8 = 0x40;
+
+// Broadcom AMBA (Advanced Microcontroller Bus Architecture) Interconnect
+// (AI) pub (crate) constants
+pub(crate) const AI_IOCTRL_OFFSET: u32 = 0x408;
+pub(crate) const AI_IOCTRL_BIT_FGC: u8 = 0x0002;
+pub(crate) const AI_IOCTRL_BIT_CLOCK_EN: u8 = 0x0001;
+pub(crate) const AI_IOCTRL_BIT_CPUHALT: u8 = 0x0020;
+
+pub(crate) const AI_RESETCTRL_OFFSET: u32 = 0x800;
+pub(crate) const AI_RESETCTRL_BIT_RESET: u8 = 1;
+
+pub(crate) const AI_RESETSTATUS_OFFSET: u32 = 0x804;
+
+pub(crate) const TEST_PATTERN: u32 = 0x12345678;
+pub(crate) const FEEDBEAD: u32 = 0xFEEDBEAD;
+
+// SPI_INTERRUPT_REGISTER and SPI_INTERRUPT_ENABLE_REGISTER Bits
+pub(crate) const IRQ_DATA_UNAVAILABLE: u16 = 0x0001; // Requested data not available; Clear by writing a "1"
+pub(crate) const IRQ_F2_F3_FIFO_RD_UNDERFLOW: u16 = 0x0002;
+pub(crate) const IRQ_F2_F3_FIFO_WR_OVERFLOW: u16 = 0x0004;
+pub(crate) const IRQ_COMMAND_ERROR: u16 = 0x0008; // Cleared by writing 1
+pub(crate) const IRQ_DATA_ERROR: u16 = 0x0010; // Cleared by writing 1
+pub(crate) const IRQ_F2_PACKET_AVAILABLE: u16 = 0x0020;
+pub(crate) const IRQ_F3_PACKET_AVAILABLE: u16 = 0x0040;
+pub(crate) const IRQ_F1_OVERFLOW: u16 = 0x0080; // Due to last write. Bkplane has pending write requests
+pub(crate) const IRQ_MISC_INTR0: u16 = 0x0100;
+pub(crate) const IRQ_MISC_INTR1: u16 = 0x0200;
+pub(crate) const IRQ_MISC_INTR2: u16 = 0x0400;
+pub(crate) const IRQ_MISC_INTR3: u16 = 0x0800;
+pub(crate) const IRQ_MISC_INTR4: u16 = 0x1000;
+pub(crate) const IRQ_F1_INTR: u16 = 0x2000;
+pub(crate) const IRQ_F2_INTR: u16 = 0x4000;
+pub(crate) const IRQ_F3_INTR: u16 = 0x8000;
+
+pub(crate) const IOCTL_CMD_UP: u32 = 2;
+pub(crate) const IOCTL_CMD_DOWN: u32 = 3;
+pub(crate) const IOCTL_CMD_SET_SSID: u32 = 26;
+pub(crate) const IOCTL_CMD_SET_CHANNEL: u32 = 30;
+pub(crate) const IOCTL_CMD_ANTDIV: u32 = 64;
+pub(crate) const IOCTL_CMD_SET_AP: u32 = 118;
+pub(crate) const IOCTL_CMD_SET_VAR: u32 = 263;
+pub(crate) const IOCTL_CMD_GET_VAR: u32 = 262;
+pub(crate) const IOCTL_CMD_SET_PASSPHRASE: u32 = 268;
+
+pub(crate) const CHANNEL_TYPE_CONTROL: u8 = 0;
+pub(crate) const CHANNEL_TYPE_EVENT: u8 = 1;
+pub(crate) const CHANNEL_TYPE_DATA: u8 = 2;
+
+// CYW_SPID command structure constants.
+pub(crate) const WRITE: bool = true;
+pub(crate) const READ: bool = false;
+pub(crate) const INC_ADDR: bool = true;
+pub(crate) const FIXED_ADDR: bool = false;
+
+pub(crate) const AES_ENABLED: u32 = 0x0004;
+pub(crate) const WPA2_SECURITY: u32 = 0x00400000;
+
+pub(crate) const MIN_PSK_LEN: usize = 8;
+pub(crate) const MAX_PSK_LEN: usize = 64;
+
+// Security type (authentication and encryption types are combined using bit mask)
+#[allow(non_camel_case_types)]
+#[derive(Copy, Clone, PartialEq)]
+#[repr(u32)]
+pub(crate) enum Security {
+    OPEN = 0,
+    WPA2_AES_PSK = WPA2_SECURITY | AES_ENABLED,
+}
+
+#[allow(non_camel_case_types)]
+#[derive(Copy, Clone)]
+#[repr(u8)]
+pub enum EStatus {
+    /// operation was successful
+    SUCCESS = 0,
+    /// operation failed
+    FAIL = 1,
+    /// operation timed out
+    TIMEOUT = 2,
+    /// failed due to no matching network found
+    NO_NETWORKS = 3,
+    /// operation was aborted
+    ABORT = 4,
+    /// protocol failure: packet not ack'd
+    NO_ACK = 5,
+    /// AUTH or ASSOC packet was unsolicited
+    UNSOLICITED = 6,
+    /// attempt to assoc to an auto auth configuration
+    ATTEMPT = 7,
+    /// scan results are incomplete
+    PARTIAL = 8,
+    /// scan aborted by another scan
+    NEWSCAN = 9,
+    /// scan aborted due to assoc in progress
+    NEWASSOC = 10,
+    /// 802.11h quiet period started
+    _11HQUIET = 11,
+    /// user disabled scanning (WLC_SET_SCANSUPPRESS)
+    SUPPRESS = 12,
+    /// no allowable channels to scan
+    NOCHANS = 13,
+    /// scan aborted due to CCX fast roam
+    CCXFASTRM = 14,
+    /// abort channel select
+    CS_ABORT = 15,
+}
+
+impl PartialEq<EStatus> for u32 {
+    fn eq(&self, other: &EStatus) -> bool {
+        *self == *other as Self
+    }
+}
+
+#[allow(dead_code)]
+pub(crate) struct FormatStatus(pub u32);
+
+#[cfg(feature = "defmt")]
+impl defmt::Format for FormatStatus {
+    fn format(&self, fmt: defmt::Formatter) {
+        macro_rules! implm {
+            ($($name:ident),*) => {
+                $(
+                    if self.0 & $name > 0 {
+                        defmt::write!(fmt, " | {}", &stringify!($name)[7..]);
+                    }
+                )*
+            };
+        }
+
+        implm!(
+            STATUS_DATA_NOT_AVAILABLE,
+            STATUS_UNDERFLOW,
+            STATUS_OVERFLOW,
+            STATUS_F2_INTR,
+            STATUS_F3_INTR,
+            STATUS_F2_RX_READY,
+            STATUS_F3_RX_READY,
+            STATUS_HOST_CMD_DATA_ERR,
+            STATUS_F2_PKT_AVAILABLE,
+            STATUS_F3_PKT_AVAILABLE
+        );
+    }
+}
+
+#[cfg(feature = "log")]
+impl core::fmt::Debug for FormatStatus {
+    fn fmt(&self, fmt: &mut core::fmt::Formatter) -> core::fmt::Result {
+        macro_rules! implm {
+            ($($name:ident),*) => {
+                $(
+                    if self.0 & $name > 0 {
+                        core::write!(fmt, " | {}", &stringify!($name)[7..])?;
+                    }
+                )*
+            };
+        }
+
+        implm!(
+            STATUS_DATA_NOT_AVAILABLE,
+            STATUS_UNDERFLOW,
+            STATUS_OVERFLOW,
+            STATUS_F2_INTR,
+            STATUS_F3_INTR,
+            STATUS_F2_RX_READY,
+            STATUS_F3_RX_READY,
+            STATUS_HOST_CMD_DATA_ERR,
+            STATUS_F2_PKT_AVAILABLE,
+            STATUS_F3_PKT_AVAILABLE
+        );
+        Ok(())
+    }
+}
+
+#[cfg(feature = "log")]
+impl core::fmt::Display for FormatStatus {
+    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
+        core::fmt::Debug::fmt(self, f)
+    }
+}
+
+#[allow(dead_code)]
+pub(crate) struct FormatInterrupt(pub u16);
+
+#[cfg(feature = "defmt")]
+impl defmt::Format for FormatInterrupt {
+    fn format(&self, fmt: defmt::Formatter) {
+        macro_rules! implm {
+            ($($name:ident),*) => {
+                $(
+                    if self.0 & $name > 0 {
+                        defmt::write!(fmt, " | {}", &stringify!($name)[4..]);
+                    }
+                )*
+            };
+        }
+
+        implm!(
+            IRQ_DATA_UNAVAILABLE,
+            IRQ_F2_F3_FIFO_RD_UNDERFLOW,
+            IRQ_F2_F3_FIFO_WR_OVERFLOW,
+            IRQ_COMMAND_ERROR,
+            IRQ_DATA_ERROR,
+            IRQ_F2_PACKET_AVAILABLE,
+            IRQ_F3_PACKET_AVAILABLE,
+            IRQ_F1_OVERFLOW,
+            IRQ_MISC_INTR0,
+            IRQ_MISC_INTR1,
+            IRQ_MISC_INTR2,
+            IRQ_MISC_INTR3,
+            IRQ_MISC_INTR4,
+            IRQ_F1_INTR,
+            IRQ_F2_INTR,
+            IRQ_F3_INTR
+        );
+    }
+}
+
+#[cfg(feature = "log")]
+impl core::fmt::Debug for FormatInterrupt {
+    fn fmt(&self, fmt: &mut core::fmt::Formatter) -> core::fmt::Result {
+        macro_rules! implm {
+            ($($name:ident),*) => {
+                $(
+                    if self.0 & $name > 0 {
+                        core::write!(fmt, " | {}", &stringify!($name)[7..])?;
+                    }
+                )*
+            };
+        }
+
+        implm!(
+            IRQ_DATA_UNAVAILABLE,
+            IRQ_F2_F3_FIFO_RD_UNDERFLOW,
+            IRQ_F2_F3_FIFO_WR_OVERFLOW,
+            IRQ_COMMAND_ERROR,
+            IRQ_DATA_ERROR,
+            IRQ_F2_PACKET_AVAILABLE,
+            IRQ_F3_PACKET_AVAILABLE,
+            IRQ_F1_OVERFLOW,
+            IRQ_MISC_INTR0,
+            IRQ_MISC_INTR1,
+            IRQ_MISC_INTR2,
+            IRQ_MISC_INTR3,
+            IRQ_MISC_INTR4,
+            IRQ_F1_INTR,
+            IRQ_F2_INTR,
+            IRQ_F3_INTR
+        );
+        Ok(())
+    }
+}
+
+#[cfg(feature = "log")]
+impl core::fmt::Display for FormatInterrupt {
+    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
+        core::fmt::Debug::fmt(self, f)
+    }
+}

cyw43/src/control.rs

@@ -0,0 +1,457 @@
+use core::cmp::{max, min};
+
+use ch::driver::LinkState;
+use embassy_net_driver_channel as ch;
+use embassy_time::{Duration, Timer};
+
+pub use crate::bus::SpiBusCyw43;
+use crate::consts::*;
+use crate::events::{Event, EventSubscriber, Events};
+use crate::fmt::Bytes;
+use crate::ioctl::{IoctlState, IoctlType};
+use crate::structs::*;
+use crate::{countries, events, PowerManagementMode};
+
+#[derive(Debug)]
+pub struct Error {
+    pub status: u32,
+}
+
+pub struct Control<'a> {
+    state_ch: ch::StateRunner<'a>,
+    events: &'a Events,
+    ioctl_state: &'a IoctlState,
+}
+
+impl<'a> Control<'a> {
+    pub(crate) fn new(state_ch: ch::StateRunner<'a>, event_sub: &'a Events, ioctl_state: &'a IoctlState) -> Self {
+        Self {
+            state_ch,
+            events: event_sub,
+            ioctl_state,
+        }
+    }
+
+    pub async fn init(&mut self, clm: &[u8]) {
+        const CHUNK_SIZE: usize = 1024;
+
+        debug!("Downloading CLM...");
+
+        let mut offs = 0;
+        for chunk in clm.chunks(CHUNK_SIZE) {
+            let mut flag = DOWNLOAD_FLAG_HANDLER_VER;
+            if offs == 0 {
+                flag |= DOWNLOAD_FLAG_BEGIN;
+            }
+            offs += chunk.len();
+            if offs == clm.len() {
+                flag |= DOWNLOAD_FLAG_END;
+            }
+
+            let header = DownloadHeader {
+                flag,
+                dload_type: DOWNLOAD_TYPE_CLM,
+                len: chunk.len() as _,
+                crc: 0,
+            };
+            let mut buf = [0; 8 + 12 + CHUNK_SIZE];
+            buf[0..8].copy_from_slice(b"clmload\x00");
+            buf[8..20].copy_from_slice(&header.to_bytes());
+            buf[20..][..chunk.len()].copy_from_slice(&chunk);
+            self.ioctl(IoctlType::Set, IOCTL_CMD_SET_VAR, 0, &mut buf[..8 + 12 + chunk.len()])
+                .await;
+        }
+
+        // check clmload ok
+        assert_eq!(self.get_iovar_u32("clmload_status").await, 0);
+
+        debug!("Configuring misc stuff...");
+
+        // Disable tx gloming which transfers multiple packets in one request.
+        // 'glom' is short for "conglomerate" which means "gather together into
+        // a compact mass".
+        self.set_iovar_u32("bus:txglom", 0).await;
+        self.set_iovar_u32("apsta", 1).await;
+
+        // read MAC addr.
+        let mut mac_addr = [0; 6];
+        assert_eq!(self.get_iovar("cur_etheraddr", &mut mac_addr).await, 6);
+        debug!("mac addr: {:02x}", Bytes(&mac_addr));
+
+        let country = countries::WORLD_WIDE_XX;
+        let country_info = CountryInfo {
+            country_abbrev: [country.code[0], country.code[1], 0, 0],
+            country_code: [country.code[0], country.code[1], 0, 0],
+            rev: if country.rev == 0 { -1 } else { country.rev as _ },
+        };
+        self.set_iovar("country", &country_info.to_bytes()).await;
+
+        // set country takes some time, next ioctls fail if we don't wait.
+        Timer::after(Duration::from_millis(100)).await;
+
+        // Set antenna to chip antenna
+        self.ioctl_set_u32(IOCTL_CMD_ANTDIV, 0, 0).await;
+
+        self.set_iovar_u32("bus:txglom", 0).await;
+        Timer::after(Duration::from_millis(100)).await;
+        //self.set_iovar_u32("apsta", 1).await; // this crashes, also we already did it before...??
+        //Timer::after(Duration::from_millis(100)).await;
+        self.set_iovar_u32("ampdu_ba_wsize", 8).await;
+        Timer::after(Duration::from_millis(100)).await;
+        self.set_iovar_u32("ampdu_mpdu", 4).await;
+        Timer::after(Duration::from_millis(100)).await;
+        //self.set_iovar_u32("ampdu_rx_factor", 0).await; // this crashes
+
+        //Timer::after(Duration::from_millis(100)).await;
+
+        // evts
+        let mut evts = EventMask {
+            iface: 0,
+            events: [0xFF; 24],
+        };
+
+        // Disable spammy uninteresting events.
+        evts.unset(Event::RADIO);
+        evts.unset(Event::IF);
+        evts.unset(Event::PROBREQ_MSG);
+        evts.unset(Event::PROBREQ_MSG_RX);
+        evts.unset(Event::PROBRESP_MSG);
+        evts.unset(Event::PROBRESP_MSG);
+        evts.unset(Event::ROAM);
+
+        self.set_iovar("bsscfg:event_msgs", &evts.to_bytes()).await;
+
+        Timer::after(Duration::from_millis(100)).await;
+
+        // set wifi up
+        self.ioctl(IoctlType::Set, IOCTL_CMD_UP, 0, &mut []).await;
+
+        Timer::after(Duration::from_millis(100)).await;
+
+        self.ioctl_set_u32(110, 0, 1).await; // SET_GMODE = auto
+        self.ioctl_set_u32(142, 0, 0).await; // SET_BAND = any
+
+        Timer::after(Duration::from_millis(100)).await;
+
+        self.state_ch.set_ethernet_address(mac_addr);
+
+        debug!("INIT DONE");
+    }
+
+    pub async fn set_power_management(&mut self, mode: PowerManagementMode) {
+        // power save mode
+        let mode_num = mode.mode();
+        if mode_num == 2 {
+            self.set_iovar_u32("pm2_sleep_ret", mode.sleep_ret_ms() as u32).await;
+            self.set_iovar_u32("bcn_li_bcn", mode.beacon_period() as u32).await;
+            self.set_iovar_u32("bcn_li_dtim", mode.dtim_period() as u32).await;
+            self.set_iovar_u32("assoc_listen", mode.assoc() as u32).await;
+        }
+        self.ioctl_set_u32(86, 0, mode_num).await;
+    }
+
+    pub async fn join_open(&mut self, ssid: &str) -> Result<(), Error> {
+        self.set_iovar_u32("ampdu_ba_wsize", 8).await;
+
+        self.ioctl_set_u32(134, 0, 0).await; // wsec = open
+        self.set_iovar_u32x2("bsscfg:sup_wpa", 0, 0).await;
+        self.ioctl_set_u32(20, 0, 1).await; // set_infra = 1
+        self.ioctl_set_u32(22, 0, 0).await; // set_auth = open (0)
+
+        let mut i = SsidInfo {
+            len: ssid.len() as _,
+            ssid: [0; 32],
+        };
+        i.ssid[..ssid.len()].copy_from_slice(ssid.as_bytes());
+
+        self.wait_for_join(i).await
+    }
+
+    pub async fn join_wpa2(&mut self, ssid: &str, passphrase: &str) -> Result<(), Error> {
+        self.set_iovar_u32("ampdu_ba_wsize", 8).await;
+
+        self.ioctl_set_u32(134, 0, 4).await; // wsec = wpa2
+        self.set_iovar_u32x2("bsscfg:sup_wpa", 0, 1).await;
+        self.set_iovar_u32x2("bsscfg:sup_wpa2_eapver", 0, 0xFFFF_FFFF).await;
+        self.set_iovar_u32x2("bsscfg:sup_wpa_tmo", 0, 2500).await;
+
+        Timer::after(Duration::from_millis(100)).await;
+
+        let mut pfi = PassphraseInfo {
+            len: passphrase.len() as _,
+            flags: 1,
+            passphrase: [0; 64],
+        };
+        pfi.passphrase[..passphrase.len()].copy_from_slice(passphrase.as_bytes());
+        self.ioctl(IoctlType::Set, IOCTL_CMD_SET_PASSPHRASE, 0, &mut pfi.to_bytes())
+            .await; // WLC_SET_WSEC_PMK
+
+        self.ioctl_set_u32(20, 0, 1).await; // set_infra = 1
+        self.ioctl_set_u32(22, 0, 0).await; // set_auth = 0 (open)
+        self.ioctl_set_u32(165, 0, 0x80).await; // set_wpa_auth
+
+        let mut i = SsidInfo {
+            len: ssid.len() as _,
+            ssid: [0; 32],
+        };
+        i.ssid[..ssid.len()].copy_from_slice(ssid.as_bytes());
+
+        self.wait_for_join(i).await
+    }
+
+    async fn wait_for_join(&mut self, i: SsidInfo) -> Result<(), Error> {
+        self.events.mask.enable(&[Event::SET_SSID, Event::AUTH]);
+        let mut subscriber = self.events.queue.subscriber().unwrap();
+        // the actual join operation starts here
+        // we make sure to enable events before so we don't miss any
+
+        // set_ssid
+        self.ioctl(IoctlType::Set, IOCTL_CMD_SET_SSID, 0, &mut i.to_bytes())
+            .await;
+
+        // to complete the join, we wait for a SET_SSID event
+        // we also save the AUTH status for the user, it may be interesting
+        let mut auth_status = 0;
+        let status = loop {
+            let msg = subscriber.next_message_pure().await;
+            if msg.header.event_type == Event::AUTH && msg.header.status != EStatus::SUCCESS {
+                auth_status = msg.header.status;
+            } else if msg.header.event_type == Event::SET_SSID {
+                // join operation ends with SET_SSID event
+                break msg.header.status;
+            }
+        };
+
+        self.events.mask.disable_all();
+        if status == EStatus::SUCCESS {
+            // successful join
+            self.state_ch.set_link_state(LinkState::Up);
+            debug!("JOINED");
+            Ok(())
+        } else {
+            warn!("JOIN failed with status={} auth={}", status, auth_status);
+            Err(Error { status })
+        }
+    }
+
+    pub async fn gpio_set(&mut self, gpio_n: u8, gpio_en: bool) {
+        assert!(gpio_n < 3);
+        self.set_iovar_u32x2("gpioout", 1 << gpio_n, if gpio_en { 1 << gpio_n } else { 0 })
+            .await
+    }
+
+    pub async fn start_ap_open(&mut self, ssid: &str, channel: u8) {
+        self.start_ap(ssid, "", Security::OPEN, channel).await;
+    }
+
+    pub async fn start_ap_wpa2(&mut self, ssid: &str, passphrase: &str, channel: u8) {
+        self.start_ap(ssid, passphrase, Security::WPA2_AES_PSK, channel).await;
+    }
+
+    async fn start_ap(&mut self, ssid: &str, passphrase: &str, security: Security, channel: u8) {
+        if security != Security::OPEN
+            && (passphrase.as_bytes().len() < MIN_PSK_LEN || passphrase.as_bytes().len() > MAX_PSK_LEN)
+        {
+            panic!("Passphrase is too short or too long");
+        }
+
+        // Temporarily set wifi down
+        self.ioctl(IoctlType::Set, IOCTL_CMD_DOWN, 0, &mut []).await;
+
+        // Turn off APSTA mode
+        self.set_iovar_u32("apsta", 0).await;
+
+        // Set wifi up again
+        self.ioctl(IoctlType::Set, IOCTL_CMD_UP, 0, &mut []).await;
+
+        // Turn on AP mode
+        self.ioctl_set_u32(IOCTL_CMD_SET_AP, 0, 1).await;
+
+        // Set SSID
+        let mut i = SsidInfoWithIndex {
+            index: 0,
+            ssid_info: SsidInfo {
+                len: ssid.as_bytes().len() as _,
+                ssid: [0; 32],
+            },
+        };
+        i.ssid_info.ssid[..ssid.as_bytes().len()].copy_from_slice(ssid.as_bytes());
+        self.set_iovar("bsscfg:ssid", &i.to_bytes()).await;
+
+        // Set channel number
+        self.ioctl_set_u32(IOCTL_CMD_SET_CHANNEL, 0, channel as u32).await;
+
+        // Set security
+        self.set_iovar_u32x2("bsscfg:wsec", 0, (security as u32) & 0xFF).await;
+
+        if security != Security::OPEN {
+            self.set_iovar_u32x2("bsscfg:wpa_auth", 0, 0x0084).await; // wpa_auth = WPA2_AUTH_PSK | WPA_AUTH_PSK
+
+            Timer::after(Duration::from_millis(100)).await;
+
+            // Set passphrase
+            let mut pfi = PassphraseInfo {
+                len: passphrase.as_bytes().len() as _,
+                flags: 1, // WSEC_PASSPHRASE
+                passphrase: [0; 64],
+            };
+            pfi.passphrase[..passphrase.as_bytes().len()].copy_from_slice(passphrase.as_bytes());
+            self.ioctl(IoctlType::Set, IOCTL_CMD_SET_PASSPHRASE, 0, &mut pfi.to_bytes())
+                .await;
+        }
+
+        // Change mutlicast rate from 1 Mbps to 11 Mbps
+        self.set_iovar_u32("2g_mrate", 11000000 / 500000).await;
+
+        // Start AP
+        self.set_iovar_u32x2("bss", 0, 1).await; // bss = BSS_UP
+    }
+
+    async fn set_iovar_u32x2(&mut self, name: &str, val1: u32, val2: u32) {
+        let mut buf = [0; 8];
+        buf[0..4].copy_from_slice(&val1.to_le_bytes());
+        buf[4..8].copy_from_slice(&val2.to_le_bytes());
+        self.set_iovar(name, &buf).await
+    }
+
+    async fn set_iovar_u32(&mut self, name: &str, val: u32) {
+        self.set_iovar(name, &val.to_le_bytes()).await
+    }
+
+    async fn get_iovar_u32(&mut self, name: &str) -> u32 {
+        let mut buf = [0; 4];
+        let len = self.get_iovar(name, &mut buf).await;
+        assert_eq!(len, 4);
+        u32::from_le_bytes(buf)
+    }
+
+    async fn set_iovar(&mut self, name: &str, val: &[u8]) {
+        self.set_iovar_v::<64>(name, val).await
+    }
+
+    async fn set_iovar_v<const BUFSIZE: usize>(&mut self, name: &str, val: &[u8]) {
+        debug!("set {} = {:02x}", name, Bytes(val));
+
+        let mut buf = [0; BUFSIZE];
+        buf[..name.len()].copy_from_slice(name.as_bytes());
+        buf[name.len()] = 0;
+        buf[name.len() + 1..][..val.len()].copy_from_slice(val);
+
+        let total_len = name.len() + 1 + val.len();
+        self.ioctl(IoctlType::Set, IOCTL_CMD_SET_VAR, 0, &mut buf[..total_len])
+            .await;
+    }
+
+    // TODO this is not really working, it always returns all zeros.
+    async fn get_iovar(&mut self, name: &str, res: &mut [u8]) -> usize {
+        debug!("get {}", name);
+
+        let mut buf = [0; 64];
+        buf[..name.len()].copy_from_slice(name.as_bytes());
+        buf[name.len()] = 0;
+
+        let total_len = max(name.len() + 1, res.len());
+        let res_len = self
+            .ioctl(IoctlType::Get, IOCTL_CMD_GET_VAR, 0, &mut buf[..total_len])
+            .await;
+
+        let out_len = min(res.len(), res_len);
+        res[..out_len].copy_from_slice(&buf[..out_len]);
+        out_len
+    }
+
+    async fn ioctl_set_u32(&mut self, cmd: u32, iface: u32, val: u32) {
+        let mut buf = val.to_le_bytes();
+        self.ioctl(IoctlType::Set, cmd, iface, &mut buf).await;
+    }
+
+    async fn ioctl(&mut self, kind: IoctlType, cmd: u32, iface: u32, buf: &mut [u8]) -> usize {
+        struct CancelOnDrop<'a>(&'a IoctlState);
+
+        impl CancelOnDrop<'_> {
+            fn defuse(self) {
+                core::mem::forget(self);
+            }
+        }
+
+        impl Drop for CancelOnDrop<'_> {
+            fn drop(&mut self) {
+                self.0.cancel_ioctl();
+            }
+        }
+
+        let ioctl = CancelOnDrop(self.ioctl_state);
+
+        ioctl.0.do_ioctl(kind, cmd, iface, buf).await;
+        let resp_len = ioctl.0.wait_complete().await;
+
+        ioctl.defuse();
+
+        resp_len
+    }
+
+    /// Start a wifi scan
+    ///
+    /// Returns a `Stream` of networks found by the device
+    ///
+    /// # Note
+    /// Device events are currently implemented using a bounded queue.
+    /// To not miss any events, you should make sure to always await the stream.
+    pub async fn scan(&mut self) -> Scanner<'_> {
+        const SCANTYPE_PASSIVE: u8 = 1;
+
+        let scan_params = ScanParams {
+            version: 1,
+            action: 1,
+            sync_id: 1,
+            ssid_len: 0,
+            ssid: [0; 32],
+            bssid: [0xff; 6],
+            bss_type: 2,
+            scan_type: SCANTYPE_PASSIVE,
+            nprobes: !0,
+            active_time: !0,
+            passive_time: !0,
+            home_time: !0,
+            channel_num: 0,
+            channel_list: [0; 1],
+        };
+
+        self.events.mask.enable(&[Event::ESCAN_RESULT]);
+        let subscriber = self.events.queue.subscriber().unwrap();
+        self.set_iovar_v::<256>("escan", &scan_params.to_bytes()).await;
+
+        Scanner {
+            subscriber,
+            events: &self.events,
+        }
+    }
+}
+
+pub struct Scanner<'a> {
+    subscriber: EventSubscriber<'a>,
+    events: &'a Events,
+}
+
+impl Scanner<'_> {
+    /// wait for the next found network
+    pub async fn next(&mut self) -> Option<BssInfo> {
+        let event = self.subscriber.next_message_pure().await;
+        if event.header.status != EStatus::PARTIAL {
+            self.events.mask.disable_all();
+            return None;
+        }
+
+        if let events::Payload::BssInfo(bss) = event.payload {
+            Some(bss)
+        } else {
+            None
+        }
+    }
+}
+
+impl Drop for Scanner<'_> {
+    fn drop(&mut self) {
+        self.events.mask.disable_all();
+    }
+}

cyw43/src/countries.rs

@@ -0,0 +1,481 @@
+#![allow(unused)]
+
+pub struct Country {
+    pub code: [u8; 2],
+    pub rev: u16,
+}
+
+/// AF Afghanistan
+pub const AFGHANISTAN: Country = Country { code: *b"AF", rev: 0 };
+/// AL Albania
+pub const ALBANIA: Country = Country { code: *b"AL", rev: 0 };
+/// DZ Algeria
+pub const ALGERIA: Country = Country { code: *b"DZ", rev: 0 };
+/// AS American_Samoa
+pub const AMERICAN_SAMOA: Country = Country { code: *b"AS", rev: 0 };
+/// AO Angola
+pub const ANGOLA: Country = Country { code: *b"AO", rev: 0 };
+/// AI Anguilla
+pub const ANGUILLA: Country = Country { code: *b"AI", rev: 0 };
+/// AG Antigua_and_Barbuda
+pub const ANTIGUA_AND_BARBUDA: Country = Country { code: *b"AG", rev: 0 };
+/// AR Argentina
+pub const ARGENTINA: Country = Country { code: *b"AR", rev: 0 };
+/// AM Armenia
+pub const ARMENIA: Country = Country { code: *b"AM", rev: 0 };
+/// AW Aruba
+pub const ARUBA: Country = Country { code: *b"AW", rev: 0 };
+/// AU Australia
+pub const AUSTRALIA: Country = Country { code: *b"AU", rev: 0 };
+/// AT Austria
+pub const AUSTRIA: Country = Country { code: *b"AT", rev: 0 };
+/// AZ Azerbaijan
+pub const AZERBAIJAN: Country = Country { code: *b"AZ", rev: 0 };
+/// BS Bahamas
+pub const BAHAMAS: Country = Country { code: *b"BS", rev: 0 };
+/// BH Bahrain
+pub const BAHRAIN: Country = Country { code: *b"BH", rev: 0 };
+/// 0B Baker_Island
+pub const BAKER_ISLAND: Country = Country { code: *b"0B", rev: 0 };
+/// BD Bangladesh
+pub const BANGLADESH: Country = Country { code: *b"BD", rev: 0 };
+/// BB Barbados
+pub const BARBADOS: Country = Country { code: *b"BB", rev: 0 };
+/// BY Belarus
+pub const BELARUS: Country = Country { code: *b"BY", rev: 0 };
+/// BE Belgium
+pub const BELGIUM: Country = Country { code: *b"BE", rev: 0 };
+/// BZ Belize
+pub const BELIZE: Country = Country { code: *b"BZ", rev: 0 };
+/// BJ Benin
+pub const BENIN: Country = Country { code: *b"BJ", rev: 0 };
+/// BM Bermuda
+pub const BERMUDA: Country = Country { code: *b"BM", rev: 0 };
+/// BT Bhutan
+pub const BHUTAN: Country = Country { code: *b"BT", rev: 0 };
+/// BO Bolivia
+pub const BOLIVIA: Country = Country { code: *b"BO", rev: 0 };
+/// BA Bosnia_and_Herzegovina
+pub const BOSNIA_AND_HERZEGOVINA: Country = Country { code: *b"BA", rev: 0 };
+/// BW Botswana
+pub const BOTSWANA: Country = Country { code: *b"BW", rev: 0 };
+/// BR Brazil
+pub const BRAZIL: Country = Country { code: *b"BR", rev: 0 };
+/// IO British_Indian_Ocean_Territory
+pub const BRITISH_INDIAN_OCEAN_TERRITORY: Country = Country { code: *b"IO", rev: 0 };
+/// BN Brunei_Darussalam
+pub const BRUNEI_DARUSSALAM: Country = Country { code: *b"BN", rev: 0 };
+/// BG Bulgaria
+pub const BULGARIA: Country = Country { code: *b"BG", rev: 0 };
+/// BF Burkina_Faso
+pub const BURKINA_FASO: Country = Country { code: *b"BF", rev: 0 };
+/// BI Burundi
+pub const BURUNDI: Country = Country { code: *b"BI", rev: 0 };
+/// KH Cambodia
+pub const CAMBODIA: Country = Country { code: *b"KH", rev: 0 };
+/// CM Cameroon
+pub const CAMEROON: Country = Country { code: *b"CM", rev: 0 };
+/// CA Canada
+pub const CANADA: Country = Country { code: *b"CA", rev: 0 };
+/// CA Canada Revision 950
+pub const CANADA_REV950: Country = Country { code: *b"CA", rev: 950 };
+/// CV Cape_Verde
+pub const CAPE_VERDE: Country = Country { code: *b"CV", rev: 0 };
+/// KY Cayman_Islands
+pub const CAYMAN_ISLANDS: Country = Country { code: *b"KY", rev: 0 };
+/// CF Central_African_Republic
+pub const CENTRAL_AFRICAN_REPUBLIC: Country = Country { code: *b"CF", rev: 0 };
+/// TD Chad
+pub const CHAD: Country = Country { code: *b"TD", rev: 0 };
+/// CL Chile
+pub const CHILE: Country = Country { code: *b"CL", rev: 0 };
+/// CN China
+pub const CHINA: Country = Country { code: *b"CN", rev: 0 };
+/// CX Christmas_Island
+pub const CHRISTMAS_ISLAND: Country = Country { code: *b"CX", rev: 0 };
+/// CO Colombia
+pub const COLOMBIA: Country = Country { code: *b"CO", rev: 0 };
+/// KM Comoros
+pub const COMOROS: Country = Country { code: *b"KM", rev: 0 };
+/// CG Congo
+pub const CONGO: Country = Country { code: *b"CG", rev: 0 };
+/// CD Congo,_The_Democratic_Republic_Of_The
+pub const CONGO_THE_DEMOCRATIC_REPUBLIC_OF_THE: Country = Country { code: *b"CD", rev: 0 };
+/// CR Costa_Rica
+pub const COSTA_RICA: Country = Country { code: *b"CR", rev: 0 };
+/// CI Cote_D'ivoire
+pub const COTE_DIVOIRE: Country = Country { code: *b"CI", rev: 0 };
+/// HR Croatia
+pub const CROATIA: Country = Country { code: *b"HR", rev: 0 };
+/// CU Cuba
+pub const CUBA: Country = Country { code: *b"CU", rev: 0 };
+/// CY Cyprus
+pub const CYPRUS: Country = Country { code: *b"CY", rev: 0 };
+/// CZ Czech_Republic
+pub const CZECH_REPUBLIC: Country = Country { code: *b"CZ", rev: 0 };
+/// DK Denmark
+pub const DENMARK: Country = Country { code: *b"DK", rev: 0 };
+/// DJ Djibouti
+pub const DJIBOUTI: Country = Country { code: *b"DJ", rev: 0 };
+/// DM Dominica
+pub const DOMINICA: Country = Country { code: *b"DM", rev: 0 };
+/// DO Dominican_Republic
+pub const DOMINICAN_REPUBLIC: Country = Country { code: *b"DO", rev: 0 };
+/// AU G'Day mate!
+pub const DOWN_UNDER: Country = Country { code: *b"AU", rev: 0 };
+/// EC Ecuador
+pub const ECUADOR: Country = Country { code: *b"EC", rev: 0 };
+/// EG Egypt
+pub const EGYPT: Country = Country { code: *b"EG", rev: 0 };
+/// SV El_Salvador
+pub const EL_SALVADOR: Country = Country { code: *b"SV", rev: 0 };
+/// GQ Equatorial_Guinea
+pub const EQUATORIAL_GUINEA: Country = Country { code: *b"GQ", rev: 0 };
+/// ER Eritrea
+pub const ERITREA: Country = Country { code: *b"ER", rev: 0 };
+/// EE Estonia
+pub const ESTONIA: Country = Country { code: *b"EE", rev: 0 };
+/// ET Ethiopia
+pub const ETHIOPIA: Country = Country { code: *b"ET", rev: 0 };
+/// FK Falkland_Islands_(Malvinas)
+pub const FALKLAND_ISLANDS_MALVINAS: Country = Country { code: *b"FK", rev: 0 };
+/// FO Faroe_Islands
+pub const FAROE_ISLANDS: Country = Country { code: *b"FO", rev: 0 };
+/// FJ Fiji
+pub const FIJI: Country = Country { code: *b"FJ", rev: 0 };
+/// FI Finland
+pub const FINLAND: Country = Country { code: *b"FI", rev: 0 };
+/// FR France
+pub const FRANCE: Country = Country { code: *b"FR", rev: 0 };
+/// GF French_Guina
+pub const FRENCH_GUINA: Country = Country { code: *b"GF", rev: 0 };
+/// PF French_Polynesia
+pub const FRENCH_POLYNESIA: Country = Country { code: *b"PF", rev: 0 };
+/// TF French_Southern_Territories
+pub const FRENCH_SOUTHERN_TERRITORIES: Country = Country { code: *b"TF", rev: 0 };
+/// GA Gabon
+pub const GABON: Country = Country { code: *b"GA", rev: 0 };
+/// GM Gambia
+pub const GAMBIA: Country = Country { code: *b"GM", rev: 0 };
+/// GE Georgia
+pub const GEORGIA: Country = Country { code: *b"GE", rev: 0 };
+/// DE Germany
+pub const GERMANY: Country = Country { code: *b"DE", rev: 0 };
+/// E0 European_Wide Revision 895
+pub const EUROPEAN_WIDE_REV895: Country = Country { code: *b"E0", rev: 895 };
+/// GH Ghana
+pub const GHANA: Country = Country { code: *b"GH", rev: 0 };
+/// GI Gibraltar
+pub const GIBRALTAR: Country = Country { code: *b"GI", rev: 0 };
+/// GR Greece
+pub const GREECE: Country = Country { code: *b"GR", rev: 0 };
+/// GD Grenada
+pub const GRENADA: Country = Country { code: *b"GD", rev: 0 };
+/// GP Guadeloupe
+pub const GUADELOUPE: Country = Country { code: *b"GP", rev: 0 };
+/// GU Guam
+pub const GUAM: Country = Country { code: *b"GU", rev: 0 };
+/// GT Guatemala
+pub const GUATEMALA: Country = Country { code: *b"GT", rev: 0 };
+/// GG Guernsey
+pub const GUERNSEY: Country = Country { code: *b"GG", rev: 0 };
+/// GN Guinea
+pub const GUINEA: Country = Country { code: *b"GN", rev: 0 };
+/// GW Guinea-bissau
+pub const GUINEA_BISSAU: Country = Country { code: *b"GW", rev: 0 };
+/// GY Guyana
+pub const GUYANA: Country = Country { code: *b"GY", rev: 0 };
+/// HT Haiti
+pub const HAITI: Country = Country { code: *b"HT", rev: 0 };
+/// VA Holy_See_(Vatican_City_State)
+pub const HOLY_SEE_VATICAN_CITY_STATE: Country = Country { code: *b"VA", rev: 0 };
+/// HN Honduras
+pub const HONDURAS: Country = Country { code: *b"HN", rev: 0 };
+/// HK Hong_Kong
+pub const HONG_KONG: Country = Country { code: *b"HK", rev: 0 };
+/// HU Hungary
+pub const HUNGARY: Country = Country { code: *b"HU", rev: 0 };
+/// IS Iceland
+pub const ICELAND: Country = Country { code: *b"IS", rev: 0 };
+/// IN India
+pub const INDIA: Country = Country { code: *b"IN", rev: 0 };
+/// ID Indonesia
+pub const INDONESIA: Country = Country { code: *b"ID", rev: 0 };
+/// IR Iran,_Islamic_Republic_Of
+pub const IRAN_ISLAMIC_REPUBLIC_OF: Country = Country { code: *b"IR", rev: 0 };
+/// IQ Iraq
+pub const IRAQ: Country = Country { code: *b"IQ", rev: 0 };
+/// IE Ireland
+pub const IRELAND: Country = Country { code: *b"IE", rev: 0 };
+/// IL Israel
+pub const ISRAEL: Country = Country { code: *b"IL", rev: 0 };
+/// IT Italy
+pub const ITALY: Country = Country { code: *b"IT", rev: 0 };
+/// JM Jamaica
+pub const JAMAICA: Country = Country { code: *b"JM", rev: 0 };
+/// JP Japan
+pub const JAPAN: Country = Country { code: *b"JP", rev: 0 };
+/// JE Jersey
+pub const JERSEY: Country = Country { code: *b"JE", rev: 0 };
+/// JO Jordan
+pub const JORDAN: Country = Country { code: *b"JO", rev: 0 };
+/// KZ Kazakhstan
+pub const KAZAKHSTAN: Country = Country { code: *b"KZ", rev: 0 };
+/// KE Kenya
+pub const KENYA: Country = Country { code: *b"KE", rev: 0 };
+/// KI Kiribati
+pub const KIRIBATI: Country = Country { code: *b"KI", rev: 0 };
+/// KR Korea,_Republic_Of
+pub const KOREA_REPUBLIC_OF: Country = Country { code: *b"KR", rev: 1 };
+/// 0A Kosovo
+pub const KOSOVO: Country = Country { code: *b"0A", rev: 0 };
+/// KW Kuwait
+pub const KUWAIT: Country = Country { code: *b"KW", rev: 0 };
+/// KG Kyrgyzstan
+pub const KYRGYZSTAN: Country = Country { code: *b"KG", rev: 0 };
+/// LA Lao_People's_Democratic_Repubic
+pub const LAO_PEOPLES_DEMOCRATIC_REPUBIC: Country = Country { code: *b"LA", rev: 0 };
+/// LV Latvia
+pub const LATVIA: Country = Country { code: *b"LV", rev: 0 };
+/// LB Lebanon
+pub const LEBANON: Country = Country { code: *b"LB", rev: 0 };
+/// LS Lesotho
+pub const LESOTHO: Country = Country { code: *b"LS", rev: 0 };
+/// LR Liberia
+pub const LIBERIA: Country = Country { code: *b"LR", rev: 0 };
+/// LY Libyan_Arab_Jamahiriya
+pub const LIBYAN_ARAB_JAMAHIRIYA: Country = Country { code: *b"LY", rev: 0 };
+/// LI Liechtenstein
+pub const LIECHTENSTEIN: Country = Country { code: *b"LI", rev: 0 };
+/// LT Lithuania
+pub const LITHUANIA: Country = Country { code: *b"LT", rev: 0 };
+/// LU Luxembourg
+pub const LUXEMBOURG: Country = Country { code: *b"LU", rev: 0 };
+/// MO Macao
+pub const MACAO: Country = Country { code: *b"MO", rev: 0 };
+/// MK Macedonia,_Former_Yugoslav_Republic_Of
+pub const MACEDONIA_FORMER_YUGOSLAV_REPUBLIC_OF: Country = Country { code: *b"MK", rev: 0 };
+/// MG Madagascar
+pub const MADAGASCAR: Country = Country { code: *b"MG", rev: 0 };
+/// MW Malawi
+pub const MALAWI: Country = Country { code: *b"MW", rev: 0 };
+/// MY Malaysia
+pub const MALAYSIA: Country = Country { code: *b"MY", rev: 0 };
+/// MV Maldives
+pub const MALDIVES: Country = Country { code: *b"MV", rev: 0 };
+/// ML Mali
+pub const MALI: Country = Country { code: *b"ML", rev: 0 };
+/// MT Malta
+pub const MALTA: Country = Country { code: *b"MT", rev: 0 };
+/// IM Man,_Isle_Of
+pub const MAN_ISLE_OF: Country = Country { code: *b"IM", rev: 0 };
+/// MQ Martinique
+pub const MARTINIQUE: Country = Country { code: *b"MQ", rev: 0 };
+/// MR Mauritania
+pub const MAURITANIA: Country = Country { code: *b"MR", rev: 0 };
+/// MU Mauritius
+pub const MAURITIUS: Country = Country { code: *b"MU", rev: 0 };
+/// YT Mayotte
+pub const MAYOTTE: Country = Country { code: *b"YT", rev: 0 };
+/// MX Mexico
+pub const MEXICO: Country = Country { code: *b"MX", rev: 0 };
+/// FM Micronesia,_Federated_States_Of
+pub const MICRONESIA_FEDERATED_STATES_OF: Country = Country { code: *b"FM", rev: 0 };
+/// MD Moldova,_Republic_Of
+pub const MOLDOVA_REPUBLIC_OF: Country = Country { code: *b"MD", rev: 0 };
+/// MC Monaco
+pub const MONACO: Country = Country { code: *b"MC", rev: 0 };
+/// MN Mongolia
+pub const MONGOLIA: Country = Country { code: *b"MN", rev: 0 };
+/// ME Montenegro
+pub const MONTENEGRO: Country = Country { code: *b"ME", rev: 0 };
+/// MS Montserrat
+pub const MONTSERRAT: Country = Country { code: *b"MS", rev: 0 };
+/// MA Morocco
+pub const MOROCCO: Country = Country { code: *b"MA", rev: 0 };
+/// MZ Mozambique
+pub const MOZAMBIQUE: Country = Country { code: *b"MZ", rev: 0 };
+/// MM Myanmar
+pub const MYANMAR: Country = Country { code: *b"MM", rev: 0 };
+/// NA Namibia
+pub const NAMIBIA: Country = Country { code: *b"NA", rev: 0 };
+/// NR Nauru
+pub const NAURU: Country = Country { code: *b"NR", rev: 0 };
+/// NP Nepal
+pub const NEPAL: Country = Country { code: *b"NP", rev: 0 };
+/// NL Netherlands
+pub const NETHERLANDS: Country = Country { code: *b"NL", rev: 0 };
+/// AN Netherlands_Antilles
+pub const NETHERLANDS_ANTILLES: Country = Country { code: *b"AN", rev: 0 };
+/// NC New_Caledonia
+pub const NEW_CALEDONIA: Country = Country { code: *b"NC", rev: 0 };
+/// NZ New_Zealand
+pub const NEW_ZEALAND: Country = Country { code: *b"NZ", rev: 0 };
+/// NI Nicaragua
+pub const NICARAGUA: Country = Country { code: *b"NI", rev: 0 };
+/// NE Niger
+pub const NIGER: Country = Country { code: *b"NE", rev: 0 };
+/// NG Nigeria
+pub const NIGERIA: Country = Country { code: *b"NG", rev: 0 };
+/// NF Norfolk_Island
+pub const NORFOLK_ISLAND: Country = Country { code: *b"NF", rev: 0 };
+/// MP Northern_Mariana_Islands
+pub const NORTHERN_MARIANA_ISLANDS: Country = Country { code: *b"MP", rev: 0 };
+/// NO Norway
+pub const NORWAY: Country = Country { code: *b"NO", rev: 0 };
+/// OM Oman
+pub const OMAN: Country = Country { code: *b"OM", rev: 0 };
+/// PK Pakistan
+pub const PAKISTAN: Country = Country { code: *b"PK", rev: 0 };
+/// PW Palau
+pub const PALAU: Country = Country { code: *b"PW", rev: 0 };
+/// PA Panama
+pub const PANAMA: Country = Country { code: *b"PA", rev: 0 };
+/// PG Papua_New_Guinea
+pub const PAPUA_NEW_GUINEA: Country = Country { code: *b"PG", rev: 0 };
+/// PY Paraguay
+pub const PARAGUAY: Country = Country { code: *b"PY", rev: 0 };
+/// PE Peru
+pub const PERU: Country = Country { code: *b"PE", rev: 0 };
+/// PH Philippines
+pub const PHILIPPINES: Country = Country { code: *b"PH", rev: 0 };
+/// PL Poland
+pub const POLAND: Country = Country { code: *b"PL", rev: 0 };
+/// PT Portugal
+pub const PORTUGAL: Country = Country { code: *b"PT", rev: 0 };
+/// PR Pueto_Rico
+pub const PUETO_RICO: Country = Country { code: *b"PR", rev: 0 };
+/// QA Qatar
+pub const QATAR: Country = Country { code: *b"QA", rev: 0 };
+/// RE Reunion
+pub const REUNION: Country = Country { code: *b"RE", rev: 0 };
+/// RO Romania
+pub const ROMANIA: Country = Country { code: *b"RO", rev: 0 };
+/// RU Russian_Federation
+pub const RUSSIAN_FEDERATION: Country = Country { code: *b"RU", rev: 0 };
+/// RW Rwanda
+pub const RWANDA: Country = Country { code: *b"RW", rev: 0 };
+/// KN Saint_Kitts_and_Nevis
+pub const SAINT_KITTS_AND_NEVIS: Country = Country { code: *b"KN", rev: 0 };
+/// LC Saint_Lucia
+pub const SAINT_LUCIA: Country = Country { code: *b"LC", rev: 0 };
+/// PM Saint_Pierre_and_Miquelon
+pub const SAINT_PIERRE_AND_MIQUELON: Country = Country { code: *b"PM", rev: 0 };
+/// VC Saint_Vincent_and_The_Grenadines
+pub const SAINT_VINCENT_AND_THE_GRENADINES: Country = Country { code: *b"VC", rev: 0 };
+/// WS Samoa
+pub const SAMOA: Country = Country { code: *b"WS", rev: 0 };
+/// MF Sanit_Martin_/_Sint_Marteen
+pub const SANIT_MARTIN_SINT_MARTEEN: Country = Country { code: *b"MF", rev: 0 };
+/// ST Sao_Tome_and_Principe
+pub const SAO_TOME_AND_PRINCIPE: Country = Country { code: *b"ST", rev: 0 };
+/// SA Saudi_Arabia
+pub const SAUDI_ARABIA: Country = Country { code: *b"SA", rev: 0 };
+/// SN Senegal
+pub const SENEGAL: Country = Country { code: *b"SN", rev: 0 };
+/// RS Serbia
+pub const SERBIA: Country = Country { code: *b"RS", rev: 0 };
+/// SC Seychelles
+pub const SEYCHELLES: Country = Country { code: *b"SC", rev: 0 };
+/// SL Sierra_Leone
+pub const SIERRA_LEONE: Country = Country { code: *b"SL", rev: 0 };
+/// SG Singapore
+pub const SINGAPORE: Country = Country { code: *b"SG", rev: 0 };
+/// SK Slovakia
+pub const SLOVAKIA: Country = Country { code: *b"SK", rev: 0 };
+/// SI Slovenia
+pub const SLOVENIA: Country = Country { code: *b"SI", rev: 0 };
+/// SB Solomon_Islands
+pub const SOLOMON_ISLANDS: Country = Country { code: *b"SB", rev: 0 };
+/// SO Somalia
+pub const SOMALIA: Country = Country { code: *b"SO", rev: 0 };
+/// ZA South_Africa
+pub const SOUTH_AFRICA: Country = Country { code: *b"ZA", rev: 0 };
+/// ES Spain
+pub const SPAIN: Country = Country { code: *b"ES", rev: 0 };
+/// LK Sri_Lanka
+pub const SRI_LANKA: Country = Country { code: *b"LK", rev: 0 };
+/// SR Suriname
+pub const SURINAME: Country = Country { code: *b"SR", rev: 0 };
+/// SZ Swaziland
+pub const SWAZILAND: Country = Country { code: *b"SZ", rev: 0 };
+/// SE Sweden
+pub const SWEDEN: Country = Country { code: *b"SE", rev: 0 };
+/// CH Switzerland
+pub const SWITZERLAND: Country = Country { code: *b"CH", rev: 0 };
+/// SY Syrian_Arab_Republic
+pub const SYRIAN_ARAB_REPUBLIC: Country = Country { code: *b"SY", rev: 0 };
+/// TW Taiwan,_Province_Of_China
+pub const TAIWAN_PROVINCE_OF_CHINA: Country = Country { code: *b"TW", rev: 0 };
+/// TJ Tajikistan
+pub const TAJIKISTAN: Country = Country { code: *b"TJ", rev: 0 };
+/// TZ Tanzania,_United_Republic_Of
+pub const TANZANIA_UNITED_REPUBLIC_OF: Country = Country { code: *b"TZ", rev: 0 };
+/// TH Thailand
+pub const THAILAND: Country = Country { code: *b"TH", rev: 0 };
+/// TG Togo
+pub const TOGO: Country = Country { code: *b"TG", rev: 0 };
+/// TO Tonga
+pub const TONGA: Country = Country { code: *b"TO", rev: 0 };
+/// TT Trinidad_and_Tobago
+pub const TRINIDAD_AND_TOBAGO: Country = Country { code: *b"TT", rev: 0 };
+/// TN Tunisia
+pub const TUNISIA: Country = Country { code: *b"TN", rev: 0 };
+/// TR Turkey
+pub const TURKEY: Country = Country { code: *b"TR", rev: 0 };
+/// TM Turkmenistan
+pub const TURKMENISTAN: Country = Country { code: *b"TM", rev: 0 };
+/// TC Turks_and_Caicos_Islands
+pub const TURKS_AND_CAICOS_ISLANDS: Country = Country { code: *b"TC", rev: 0 };
+/// TV Tuvalu
+pub const TUVALU: Country = Country { code: *b"TV", rev: 0 };
+/// UG Uganda
+pub const UGANDA: Country = Country { code: *b"UG", rev: 0 };
+/// UA Ukraine
+pub const UKRAINE: Country = Country { code: *b"UA", rev: 0 };
+/// AE United_Arab_Emirates
+pub const UNITED_ARAB_EMIRATES: Country = Country { code: *b"AE", rev: 0 };
+/// GB United_Kingdom
+pub const UNITED_KINGDOM: Country = Country { code: *b"GB", rev: 0 };
+/// US United_States
+pub const UNITED_STATES: Country = Country { code: *b"US", rev: 0 };
+/// US United_States Revision 4
+pub const UNITED_STATES_REV4: Country = Country { code: *b"US", rev: 4 };
+/// Q1 United_States Revision 931
+pub const UNITED_STATES_REV931: Country = Country { code: *b"Q1", rev: 931 };
+/// Q2 United_States_(No_DFS)
+pub const UNITED_STATES_NO_DFS: Country = Country { code: *b"Q2", rev: 0 };
+/// UM United_States_Minor_Outlying_Islands
+pub const UNITED_STATES_MINOR_OUTLYING_ISLANDS: Country = Country { code: *b"UM", rev: 0 };
+/// UY Uruguay
+pub const URUGUAY: Country = Country { code: *b"UY", rev: 0 };
+/// UZ Uzbekistan
+pub const UZBEKISTAN: Country = Country { code: *b"UZ", rev: 0 };
+/// VU Vanuatu
+pub const VANUATU: Country = Country { code: *b"VU", rev: 0 };
+/// VE Venezuela
+pub const VENEZUELA: Country = Country { code: *b"VE", rev: 0 };
+/// VN Viet_Nam
+pub const VIET_NAM: Country = Country { code: *b"VN", rev: 0 };
+/// VG Virgin_Islands,_British
+pub const VIRGIN_ISLANDS_BRITISH: Country = Country { code: *b"VG", rev: 0 };
+/// VI Virgin_Islands,_U.S.
+pub const VIRGIN_ISLANDS_US: Country = Country { code: *b"VI", rev: 0 };
+/// WF Wallis_and_Futuna
+pub const WALLIS_AND_FUTUNA: Country = Country { code: *b"WF", rev: 0 };
+/// 0C West_Bank
+pub const WEST_BANK: Country = Country { code: *b"0C", rev: 0 };
+/// EH Western_Sahara
+pub const WESTERN_SAHARA: Country = Country { code: *b"EH", rev: 0 };
+/// Worldwide Locale Revision 983
+pub const WORLD_WIDE_XV_REV983: Country = Country { code: *b"XV", rev: 983 };
+/// Worldwide Locale (passive Ch12-14)
+pub const WORLD_WIDE_XX: Country = Country { code: *b"XX", rev: 0 };
+/// Worldwide Locale (passive Ch12-14) Revision 17
+pub const WORLD_WIDE_XX_REV17: Country = Country { code: *b"XX", rev: 17 };
+/// YE Yemen
+pub const YEMEN: Country = Country { code: *b"YE", rev: 0 };
+/// ZM Zambia
+pub const ZAMBIA: Country = Country { code: *b"ZM", rev: 0 };
+/// ZW Zimbabwe
+pub const ZIMBABWE: Country = Country { code: *b"ZW", rev: 0 };

cyw43/src/events.rs

@@ -0,0 +1,400 @@
+#![allow(dead_code)]
+#![allow(non_camel_case_types)]
+
+use core::cell::RefCell;
+
+use embassy_sync::blocking_mutex::raw::NoopRawMutex;
+use embassy_sync::pubsub::{PubSubChannel, Subscriber};
+
+use crate::structs::BssInfo;
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq, num_enum::FromPrimitive)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(u8)]
+pub enum Event {
+    #[num_enum(default)]
+    Unknown = 0xFF,
+    /// indicates status of set SSID
+    SET_SSID = 0,
+    /// differentiates join IBSS from found (START) IBSS
+    JOIN = 1,
+    /// STA founded an IBSS or AP started a BSS
+    START = 2,
+    /// 802.11 AUTH request
+    AUTH = 3,
+    /// 802.11 AUTH indication
+    AUTH_IND = 4,
+    /// 802.11 DEAUTH request
+    DEAUTH = 5,
+    /// 802.11 DEAUTH indication
+    DEAUTH_IND = 6,
+    /// 802.11 ASSOC request
+    ASSOC = 7,
+    /// 802.11 ASSOC indication
+    ASSOC_IND = 8,
+    /// 802.11 REASSOC request
+    REASSOC = 9,
+    /// 802.11 REASSOC indication
+    REASSOC_IND = 10,
+    /// 802.11 DISASSOC request
+    DISASSOC = 11,
+    /// 802.11 DISASSOC indication
+    DISASSOC_IND = 12,
+    /// 802.11h Quiet period started
+    QUIET_START = 13,
+    /// 802.11h Quiet period ended
+    QUIET_END = 14,
+    /// BEACONS received/lost indication
+    BEACON_RX = 15,
+    /// generic link indication
+    LINK = 16,
+    /// TKIP MIC error occurred
+    MIC_ERROR = 17,
+    /// NDIS style link indication
+    NDIS_LINK = 18,
+    /// roam attempt occurred: indicate status & reason
+    ROAM = 19,
+    /// change in dot11FailedCount (txfail)
+    TXFAIL = 20,
+    /// WPA2 pmkid cache indication
+    PMKID_CACHE = 21,
+    /// current AP's TSF value went backward
+    RETROGRADE_TSF = 22,
+    /// AP was pruned from join list for reason
+    PRUNE = 23,
+    /// report AutoAuth table entry match for join attempt
+    AUTOAUTH = 24,
+    /// Event encapsulating an EAPOL message
+    EAPOL_MSG = 25,
+    /// Scan results are ready or scan was aborted
+    SCAN_COMPLETE = 26,
+    /// indicate to host addts fail/success
+    ADDTS_IND = 27,
+    /// indicate to host delts fail/success
+    DELTS_IND = 28,
+    /// indicate to host of beacon transmit
+    BCNSENT_IND = 29,
+    /// Send the received beacon up to the host
+    BCNRX_MSG = 30,
+    /// indicate to host loss of beacon
+    BCNLOST_MSG = 31,
+    /// before attempting to roam
+    ROAM_PREP = 32,
+    /// PFN network found event
+    PFN_NET_FOUND = 33,
+    /// PFN network lost event
+    PFN_NET_LOST = 34,
+    RESET_COMPLETE = 35,
+    JOIN_START = 36,
+    ROAM_START = 37,
+    ASSOC_START = 38,
+    IBSS_ASSOC = 39,
+    RADIO = 40,
+    /// PSM microcode watchdog fired
+    PSM_WATCHDOG = 41,
+    /// CCX association start
+    CCX_ASSOC_START = 42,
+    /// CCX association abort
+    CCX_ASSOC_ABORT = 43,
+    /// probe request received
+    PROBREQ_MSG = 44,
+    SCAN_CONFIRM_IND = 45,
+    /// WPA Handshake
+    PSK_SUP = 46,
+    COUNTRY_CODE_CHANGED = 47,
+    /// WMMAC excedded medium time
+    EXCEEDED_MEDIUM_TIME = 48,
+    /// WEP ICV error occurred
+    ICV_ERROR = 49,
+    /// Unsupported unicast encrypted frame
+    UNICAST_DECODE_ERROR = 50,
+    /// Unsupported multicast encrypted frame
+    MULTICAST_DECODE_ERROR = 51,
+    TRACE = 52,
+    /// BT-AMP HCI event
+    BTA_HCI_EVENT = 53,
+    /// I/F change (for wlan host notification)
+    IF = 54,
+    /// P2P Discovery listen state expires
+    P2P_DISC_LISTEN_COMPLETE = 55,
+    /// indicate RSSI change based on configured levels
+    RSSI = 56,
+    /// PFN best network batching event
+    PFN_BEST_BATCHING = 57,
+    EXTLOG_MSG = 58,
+    /// Action frame reception
+    ACTION_FRAME = 59,
+    /// Action frame Tx complete
+    ACTION_FRAME_COMPLETE = 60,
+    /// assoc request received
+    PRE_ASSOC_IND = 61,
+    /// re-assoc request received
+    PRE_REASSOC_IND = 62,
+    /// channel adopted (xxx: obsoleted)
+    CHANNEL_ADOPTED = 63,
+    /// AP started
+    AP_STARTED = 64,
+    /// AP stopped due to DFS
+    DFS_AP_STOP = 65,
+    /// AP resumed due to DFS
+    DFS_AP_RESUME = 66,
+    /// WAI stations event
+    WAI_STA_EVENT = 67,
+    /// event encapsulating an WAI message
+    WAI_MSG = 68,
+    /// escan result event
+    ESCAN_RESULT = 69,
+    /// action frame off channel complete
+    ACTION_FRAME_OFF_CHAN_COMPLETE = 70,
+    /// probe response received
+    PROBRESP_MSG = 71,
+    /// P2P Probe request received
+    P2P_PROBREQ_MSG = 72,
+    DCS_REQUEST = 73,
+    /// credits for D11 FIFOs. [AC0,AC1,AC2,AC3,BC_MC,ATIM]
+    FIFO_CREDIT_MAP = 74,
+    /// Received action frame event WITH wl_event_rx_frame_data_t header
+    ACTION_FRAME_RX = 75,
+    /// Wake Event timer fired, used for wake WLAN test mode
+    WAKE_EVENT = 76,
+    /// Radio measurement complete
+    RM_COMPLETE = 77,
+    /// Synchronize TSF with the host
+    HTSFSYNC = 78,
+    /// request an overlay IOCTL/iovar from the host
+    OVERLAY_REQ = 79,
+    CSA_COMPLETE_IND = 80,
+    /// excess PM Wake Event to inform host
+    EXCESS_PM_WAKE_EVENT = 81,
+    /// no PFN networks around
+    PFN_SCAN_NONE = 82,
+    /// last found PFN network gets lost
+    PFN_SCAN_ALLGONE = 83,
+    GTK_PLUMBED = 84,
+    /// 802.11 ASSOC indication for NDIS only
+    ASSOC_IND_NDIS = 85,
+    /// 802.11 REASSOC indication for NDIS only
+    REASSOC_IND_NDIS = 86,
+    ASSOC_REQ_IE = 87,
+    ASSOC_RESP_IE = 88,
+    /// association recreated on resume
+    ASSOC_RECREATED = 89,
+    /// rx action frame event for NDIS only
+    ACTION_FRAME_RX_NDIS = 90,
+    /// authentication request received
+    AUTH_REQ = 91,
+    /// fast assoc recreation failed
+    SPEEDY_RECREATE_FAIL = 93,
+    /// port-specific event and payload (e.g. NDIS)
+    NATIVE = 94,
+    /// event for tx pkt delay suddently jump
+    PKTDELAY_IND = 95,
+    /// AWDL AW period starts
+    AWDL_AW = 96,
+    /// AWDL Master/Slave/NE master role event
+    AWDL_ROLE = 97,
+    /// Generic AWDL event
+    AWDL_EVENT = 98,
+    /// NIC AF txstatus
+    NIC_AF_TXS = 99,
+    /// NAN event
+    NAN = 100,
+    BEACON_FRAME_RX = 101,
+    /// desired service found
+    SERVICE_FOUND = 102,
+    /// GAS fragment received
+    GAS_FRAGMENT_RX = 103,
+    /// GAS sessions all complete
+    GAS_COMPLETE = 104,
+    /// New device found by p2p offload
+    P2PO_ADD_DEVICE = 105,
+    /// device has been removed by p2p offload
+    P2PO_DEL_DEVICE = 106,
+    /// WNM event to notify STA enter sleep mode
+    WNM_STA_SLEEP = 107,
+    /// Indication of MAC tx failures (exhaustion of 802.11 retries) exceeding threshold(s)
+    TXFAIL_THRESH = 108,
+    /// Proximity Detection event
+    PROXD = 109,
+    /// AWDL RX Probe response
+    AWDL_RX_PRB_RESP = 111,
+    /// AWDL RX Action Frames
+    AWDL_RX_ACT_FRAME = 112,
+    /// AWDL Wowl nulls
+    AWDL_WOWL_NULLPKT = 113,
+    /// AWDL Phycal status
+    AWDL_PHYCAL_STATUS = 114,
+    /// AWDL OOB AF status
+    AWDL_OOB_AF_STATUS = 115,
+    /// Interleaved Scan status
+    AWDL_SCAN_STATUS = 116,
+    /// AWDL AW Start
+    AWDL_AW_START = 117,
+    /// AWDL AW End
+    AWDL_AW_END = 118,
+    /// AWDL AW Extensions
+    AWDL_AW_EXT = 119,
+    AWDL_PEER_CACHE_CONTROL = 120,
+    CSA_START_IND = 121,
+    CSA_DONE_IND = 122,
+    CSA_FAILURE_IND = 123,
+    /// CCA based channel quality report
+    CCA_CHAN_QUAL = 124,
+    /// to report change in BSSID while roaming
+    BSSID = 125,
+    /// tx error indication
+    TX_STAT_ERROR = 126,
+    /// credit check for BCMC supported
+    BCMC_CREDIT_SUPPORT = 127,
+    /// psta primary interface indication
+    PSTA_PRIMARY_INTF_IND = 128,
+    /// Handover Request Initiated
+    BT_WIFI_HANDOVER_REQ = 130,
+    /// Southpaw TxInhibit notification
+    SPW_TXINHIBIT = 131,
+    /// FBT Authentication Request Indication
+    FBT_AUTH_REQ_IND = 132,
+    /// Enhancement addition for RSSI
+    RSSI_LQM = 133,
+    /// Full probe/beacon (IEs etc) results
+    PFN_GSCAN_FULL_RESULT = 134,
+    /// Significant change in rssi of bssids being tracked
+    PFN_SWC = 135,
+    /// a STA been authroized for traffic
+    AUTHORIZED = 136,
+    /// probe req with wl_event_rx_frame_data_t header
+    PROBREQ_MSG_RX = 137,
+    /// PFN completed scan of network list
+    PFN_SCAN_COMPLETE = 138,
+    /// RMC Event
+    RMC_EVENT = 139,
+    /// DPSTA interface indication
+    DPSTA_INTF_IND = 140,
+    /// RRM Event
+    RRM = 141,
+    /// ULP entry event
+    ULP = 146,
+    /// TCP Keep Alive Offload Event
+    TKO = 151,
+    /// authentication request received
+    EXT_AUTH_REQ = 187,
+    /// authentication request received
+    EXT_AUTH_FRAME_RX = 188,
+    /// mgmt frame Tx complete
+    MGMT_FRAME_TXSTATUS = 189,
+    /// highest val + 1 for range checking
+    LAST = 190,
+}
+
+// TODO this PubSub can probably be replaced with shared memory to make it a bit more efficient.
+pub type EventQueue = PubSubChannel<NoopRawMutex, Message, 2, 1, 1>;
+pub type EventSubscriber<'a> = Subscriber<'a, NoopRawMutex, Message, 2, 1, 1>;
+
+pub struct Events {
+    pub queue: EventQueue,
+    pub mask: SharedEventMask,
+}
+
+impl Events {
+    pub fn new() -> Self {
+        Self {
+            queue: EventQueue::new(),
+            mask: SharedEventMask::default(),
+        }
+    }
+}
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub struct Status {
+    pub event_type: Event,
+    pub status: u32,
+}
+
+#[derive(Clone, Copy)]
+pub enum Payload {
+    None,
+    BssInfo(BssInfo),
+}
+
+#[derive(Clone, Copy)]
+
+pub struct Message {
+    pub header: Status,
+    pub payload: Payload,
+}
+
+impl Message {
+    pub fn new(status: Status, payload: Payload) -> Self {
+        Self {
+            header: status,
+            payload,
+        }
+    }
+}
+
+#[derive(Default)]
+struct EventMask {
+    mask: [u32; Self::WORD_COUNT],
+}
+
+impl EventMask {
+    const WORD_COUNT: usize = ((Event::LAST as u32 + (u32::BITS - 1)) / u32::BITS) as usize;
+
+    fn enable(&mut self, event: Event) {
+        let n = event as u32;
+        let word = n / u32::BITS;
+        let bit = n % u32::BITS;
+
+        self.mask[word as usize] |= 1 << bit;
+    }
+
+    fn disable(&mut self, event: Event) {
+        let n = event as u32;
+        let word = n / u32::BITS;
+        let bit = n % u32::BITS;
+
+        self.mask[word as usize] &= !(1 << bit);
+    }
+
+    fn is_enabled(&self, event: Event) -> bool {
+        let n = event as u32;
+        let word = n / u32::BITS;
+        let bit = n % u32::BITS;
+
+        self.mask[word as usize] & (1 << bit) > 0
+    }
+}
+
+#[derive(Default)]
+
+pub struct SharedEventMask {
+    mask: RefCell<EventMask>,
+}
+
+impl SharedEventMask {
+    pub fn enable(&self, events: &[Event]) {
+        let mut mask = self.mask.borrow_mut();
+        for event in events {
+            mask.enable(*event);
+        }
+    }
+
+    #[allow(dead_code)]
+    pub fn disable(&self, events: &[Event]) {
+        let mut mask = self.mask.borrow_mut();
+        for event in events {
+            mask.disable(*event);
+        }
+    }
+
+    pub fn disable_all(&self) {
+        let mut mask = self.mask.borrow_mut();
+        mask.mask = Default::default();
+    }
+
+    pub fn is_enabled(&self, event: Event) -> bool {
+        let mask = self.mask.borrow();
+        mask.is_enabled(event)
+    }
+}

cyw43/src/fmt.rs

@@ -0,0 +1,257 @@
+#![macro_use]
+#![allow(unused_macros)]
+
+use core::fmt::{Debug, Display, LowerHex};
+
+#[cfg(all(feature = "defmt", feature = "log"))]
+compile_error!("You may not enable both `defmt` and `log` features.");
+
+macro_rules! assert {
+    ($($x:tt)*) => {
+        {
+            #[cfg(not(feature = "defmt"))]
+            ::core::assert!($($x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::assert!($($x)*);
+        }
+    };
+}
+
+macro_rules! assert_eq {
+    ($($x:tt)*) => {
+        {
+            #[cfg(not(feature = "defmt"))]
+            ::core::assert_eq!($($x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::assert_eq!($($x)*);
+        }
+    };
+}
+
+macro_rules! assert_ne {
+    ($($x:tt)*) => {
+        {
+            #[cfg(not(feature = "defmt"))]
+            ::core::assert_ne!($($x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::assert_ne!($($x)*);
+        }
+    };
+}
+
+macro_rules! debug_assert {
+    ($($x:tt)*) => {
+        {
+            #[cfg(not(feature = "defmt"))]
+            ::core::debug_assert!($($x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::debug_assert!($($x)*);
+        }
+    };
+}
+
+macro_rules! debug_assert_eq {
+    ($($x:tt)*) => {
+        {
+            #[cfg(not(feature = "defmt"))]
+            ::core::debug_assert_eq!($($x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::debug_assert_eq!($($x)*);
+        }
+    };
+}
+
+macro_rules! debug_assert_ne {
+    ($($x:tt)*) => {
+        {
+            #[cfg(not(feature = "defmt"))]
+            ::core::debug_assert_ne!($($x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::debug_assert_ne!($($x)*);
+        }
+    };
+}
+
+macro_rules! todo {
+    ($($x:tt)*) => {
+        {
+            #[cfg(not(feature = "defmt"))]
+            ::core::todo!($($x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::todo!($($x)*);
+        }
+    };
+}
+
+macro_rules! unreachable {
+    ($($x:tt)*) => {
+        {
+            #[cfg(not(feature = "defmt"))]
+            ::core::unreachable!($($x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::unreachable!($($x)*);
+        }
+    };
+}
+
+macro_rules! panic {
+    ($($x:tt)*) => {
+        {
+            #[cfg(not(feature = "defmt"))]
+            ::core::panic!($($x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::panic!($($x)*);
+        }
+    };
+}
+
+macro_rules! trace {
+    ($s:literal $(, $x:expr)* $(,)?) => {
+        {
+            #[cfg(feature = "log")]
+            ::log::trace!($s $(, $x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::trace!($s $(, $x)*);
+            #[cfg(not(any(feature = "log", feature="defmt")))]
+            let _ = ($( & $x ),*);
+        }
+    };
+}
+
+macro_rules! debug {
+    ($s:literal $(, $x:expr)* $(,)?) => {
+        {
+            #[cfg(feature = "log")]
+            ::log::debug!($s $(, $x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::debug!($s $(, $x)*);
+            #[cfg(not(any(feature = "log", feature="defmt")))]
+            let _ = ($( & $x ),*);
+        }
+    };
+}
+
+macro_rules! info {
+    ($s:literal $(, $x:expr)* $(,)?) => {
+        {
+            #[cfg(feature = "log")]
+            ::log::info!($s $(, $x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::info!($s $(, $x)*);
+            #[cfg(not(any(feature = "log", feature="defmt")))]
+            let _ = ($( & $x ),*);
+        }
+    };
+}
+
+macro_rules! warn {
+    ($s:literal $(, $x:expr)* $(,)?) => {
+        {
+            #[cfg(feature = "log")]
+            ::log::warn!($s $(, $x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::warn!($s $(, $x)*);
+            #[cfg(not(any(feature = "log", feature="defmt")))]
+            let _ = ($( & $x ),*);
+        }
+    };
+}
+
+macro_rules! error {
+    ($s:literal $(, $x:expr)* $(,)?) => {
+        {
+            #[cfg(feature = "log")]
+            ::log::error!($s $(, $x)*);
+            #[cfg(feature = "defmt")]
+            ::defmt::error!($s $(, $x)*);
+            #[cfg(not(any(feature = "log", feature="defmt")))]
+            let _ = ($( & $x ),*);
+        }
+    };
+}
+
+#[cfg(feature = "defmt")]
+macro_rules! unwrap {
+    ($($x:tt)*) => {
+        ::defmt::unwrap!($($x)*)
+    };
+}
+
+#[cfg(not(feature = "defmt"))]
+macro_rules! unwrap {
+    ($arg:expr) => {
+        match $crate::fmt::Try::into_result($arg) {
+            ::core::result::Result::Ok(t) => t,
+            ::core::result::Result::Err(e) => {
+                ::core::panic!("unwrap of `{}` failed: {:?}", ::core::stringify!($arg), e);
+            }
+        }
+    };
+    ($arg:expr, $($msg:expr),+ $(,)? ) => {
+        match $crate::fmt::Try::into_result($arg) {
+            ::core::result::Result::Ok(t) => t,
+            ::core::result::Result::Err(e) => {
+                ::core::panic!("unwrap of `{}` failed: {}: {:?}", ::core::stringify!($arg), ::core::format_args!($($msg,)*), e);
+            }
+        }
+    }
+}
+
+#[cfg(feature = "defmt-timestamp-uptime")]
+defmt::timestamp! {"{=u64:us}", crate::time::Instant::now().as_micros() }
+
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+pub struct NoneError;
+
+pub trait Try {
+    type Ok;
+    type Error;
+    fn into_result(self) -> Result<Self::Ok, Self::Error>;
+}
+
+impl<T> Try for Option<T> {
+    type Ok = T;
+    type Error = NoneError;
+
+    #[inline]
+    fn into_result(self) -> Result<T, NoneError> {
+        self.ok_or(NoneError)
+    }
+}
+
+impl<T, E> Try for Result<T, E> {
+    type Ok = T;
+    type Error = E;
+
+    #[inline]
+    fn into_result(self) -> Self {
+        self
+    }
+}
+
+pub struct Bytes<'a>(pub &'a [u8]);
+
+impl<'a> Debug for Bytes<'a> {
+    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
+        write!(f, "{:#02x?}", self.0)
+    }
+}
+
+impl<'a> Display for Bytes<'a> {
+    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
+        write!(f, "{:#02x?}", self.0)
+    }
+}
+
+impl<'a> LowerHex for Bytes<'a> {
+    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
+        write!(f, "{:#02x?}", self.0)
+    }
+}
+
+#[cfg(feature = "defmt")]
+impl<'a> defmt::Format for Bytes<'a> {
+    fn format(&self, fmt: defmt::Formatter) {
+        defmt::write!(fmt, "{:02x}", self.0)
+    }
+}

cyw43/src/ioctl.rs

@@ -0,0 +1,126 @@
+use core::cell::{Cell, RefCell};
+use core::future::poll_fn;
+use core::task::{Poll, Waker};
+
+use embassy_sync::waitqueue::WakerRegistration;
+
+use crate::fmt::Bytes;
+
+#[derive(Clone, Copy)]
+pub enum IoctlType {
+    Get = 0,
+    Set = 2,
+}
+
+#[derive(Clone, Copy)]
+pub struct PendingIoctl {
+    pub buf: *mut [u8],
+    pub kind: IoctlType,
+    pub cmd: u32,
+    pub iface: u32,
+}
+
+#[derive(Clone, Copy)]
+enum IoctlStateInner {
+    Pending(PendingIoctl),
+    Sent { buf: *mut [u8] },
+    Done { resp_len: usize },
+}
+
+struct Wakers {
+    control: WakerRegistration,
+    runner: WakerRegistration,
+}
+
+impl Default for Wakers {
+    fn default() -> Self {
+        Self {
+            control: WakerRegistration::new(),
+            runner: WakerRegistration::new(),
+        }
+    }
+}
+
+pub struct IoctlState {
+    state: Cell<IoctlStateInner>,
+    wakers: RefCell<Wakers>,
+}
+
+impl IoctlState {
+    pub fn new() -> Self {
+        Self {
+            state: Cell::new(IoctlStateInner::Done { resp_len: 0 }),
+            wakers: Default::default(),
+        }
+    }
+
+    fn wake_control(&self) {
+        self.wakers.borrow_mut().control.wake();
+    }
+
+    fn register_control(&self, waker: &Waker) {
+        self.wakers.borrow_mut().control.register(waker);
+    }
+
+    fn wake_runner(&self) {
+        self.wakers.borrow_mut().runner.wake();
+    }
+
+    fn register_runner(&self, waker: &Waker) {
+        self.wakers.borrow_mut().runner.register(waker);
+    }
+
+    pub async fn wait_complete(&self) -> usize {
+        poll_fn(|cx| {
+            if let IoctlStateInner::Done { resp_len } = self.state.get() {
+                Poll::Ready(resp_len)
+            } else {
+                self.register_control(cx.waker());
+                Poll::Pending
+            }
+        })
+        .await
+    }
+
+    pub async fn wait_pending(&self) -> PendingIoctl {
+        let pending = poll_fn(|cx| {
+            if let IoctlStateInner::Pending(pending) = self.state.get() {
+                Poll::Ready(pending)
+            } else {
+                self.register_runner(cx.waker());
+                Poll::Pending
+            }
+        })
+        .await;
+
+        self.state.set(IoctlStateInner::Sent { buf: pending.buf });
+        pending
+    }
+
+    pub fn cancel_ioctl(&self) {
+        self.state.set(IoctlStateInner::Done { resp_len: 0 });
+    }
+
+    pub async fn do_ioctl(&self, kind: IoctlType, cmd: u32, iface: u32, buf: &mut [u8]) -> usize {
+        self.state
+            .set(IoctlStateInner::Pending(PendingIoctl { buf, kind, cmd, iface }));
+        self.wake_runner();
+        self.wait_complete().await
+    }
+
+    pub fn ioctl_done(&self, response: &[u8]) {
+        if let IoctlStateInner::Sent { buf } = self.state.get() {
+            trace!("IOCTL Response: {:02x}", Bytes(response));
+
+            // TODO fix this
+            (unsafe { &mut *buf }[..response.len()]).copy_from_slice(response);
+
+            self.state.set(IoctlStateInner::Done {
+                resp_len: response.len(),
+            });
+            self.wake_control();
+        } else {
+            warn!("IOCTL Response but no pending Ioctl");
+        }
+    }
+}

cyw43/src/lib.rs

@@ -0,0 +1,236 @@
+#![no_std]
+#![no_main]
+#![allow(incomplete_features)]
+#![feature(async_fn_in_trait, type_alias_impl_trait, concat_bytes)]
+#![deny(unused_must_use)]
+
+// This mod MUST go first, so that the others see its macros.
+pub(crate) mod fmt;
+
+mod bus;
+mod consts;
+mod countries;
+mod events;
+mod ioctl;
+mod structs;
+
+mod control;
+mod nvram;
+mod runner;
+
+use core::slice;
+
+use embassy_net_driver_channel as ch;
+use embedded_hal_1::digital::OutputPin;
+use events::Events;
+use ioctl::IoctlState;
+
+use crate::bus::Bus;
+pub use crate::bus::SpiBusCyw43;
+pub use crate::control::{Control, Error as ControlError};
+pub use crate::runner::Runner;
+pub use crate::structs::BssInfo;
+
+const MTU: usize = 1514;
+
+#[allow(unused)]
+#[derive(Clone, Copy, PartialEq, Eq)]
+enum Core {
+    WLAN = 0,
+    SOCSRAM = 1,
+    SDIOD = 2,
+}
+
+impl Core {
+    fn base_addr(&self) -> u32 {
+        match self {
+            Self::WLAN => CHIP.arm_core_base_address,
+            Self::SOCSRAM => CHIP.socsram_wrapper_base_address,
+            Self::SDIOD => CHIP.sdiod_core_base_address,
+        }
+    }
+}
+
+#[allow(unused)]
+struct Chip {
+    arm_core_base_address: u32,
+    socsram_base_address: u32,
+    socsram_wrapper_base_address: u32,
+    sdiod_core_base_address: u32,
+    pmu_base_address: u32,
+    chip_ram_size: u32,
+    atcm_ram_base_address: u32,
+    socram_srmem_size: u32,
+    chanspec_band_mask: u32,
+    chanspec_band_2g: u32,
+    chanspec_band_5g: u32,
+    chanspec_band_shift: u32,
+    chanspec_bw_10: u32,
+    chanspec_bw_20: u32,
+    chanspec_bw_40: u32,
+    chanspec_bw_mask: u32,
+    chanspec_bw_shift: u32,
+    chanspec_ctl_sb_lower: u32,
+    chanspec_ctl_sb_upper: u32,
+    chanspec_ctl_sb_none: u32,
+    chanspec_ctl_sb_mask: u32,
+}
+
+const WRAPPER_REGISTER_OFFSET: u32 = 0x100000;
+
+// Data for CYW43439
+const CHIP: Chip = Chip {
+    arm_core_base_address: 0x18003000 + WRAPPER_REGISTER_OFFSET,
+    socsram_base_address: 0x18004000,
+    socsram_wrapper_base_address: 0x18004000 + WRAPPER_REGISTER_OFFSET,
+    sdiod_core_base_address: 0x18002000,
+    pmu_base_address: 0x18000000,
+    chip_ram_size: 512 * 1024,
+    atcm_ram_base_address: 0,
+    socram_srmem_size: 64 * 1024,
+    chanspec_band_mask: 0xc000,
+    chanspec_band_2g: 0x0000,
+    chanspec_band_5g: 0xc000,
+    chanspec_band_shift: 14,
+    chanspec_bw_10: 0x0800,
+    chanspec_bw_20: 0x1000,
+    chanspec_bw_40: 0x1800,
+    chanspec_bw_mask: 0x3800,
+    chanspec_bw_shift: 11,
+    chanspec_ctl_sb_lower: 0x0000,
+    chanspec_ctl_sb_upper: 0x0100,
+    chanspec_ctl_sb_none: 0x0000,
+    chanspec_ctl_sb_mask: 0x0700,
+};
+
+pub struct State {
+    ioctl_state: IoctlState,
+    ch: ch::State<MTU, 4, 4>,
+    events: Events,
+}
+
+impl State {
+    pub fn new() -> Self {
+        Self {
+            ioctl_state: IoctlState::new(),
+            ch: ch::State::new(),
+            events: Events::new(),
+        }
+    }
+}
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq)]
+pub enum PowerManagementMode {
+    /// Custom, officially unsupported mode. Use at your own risk.
+    /// All power-saving features set to their max at only a marginal decrease in power consumption
+    /// as oppposed to `Aggressive`.
+    SuperSave,
+
+    /// Aggressive power saving mode.
+    Aggressive,
+
+    /// The default mode.
+    PowerSave,
+
+    /// Performance is prefered over power consumption but still some power is conserved as opposed to
+    /// `None`.
+    Performance,
+
+    /// Unlike all the other PM modes, this lowers the power consumption at all times at the cost of
+    /// a much lower throughput.
+    ThroughputThrottling,
+
+    /// No power management is configured. This consumes the most power.
+    None,
+}
+
+impl Default for PowerManagementMode {
+    fn default() -> Self {
+        Self::PowerSave
+    }
+}
+
+impl PowerManagementMode {
+    fn sleep_ret_ms(&self) -> u16 {
+        match self {
+            PowerManagementMode::SuperSave => 2000,
+            PowerManagementMode::Aggressive => 2000,
+            PowerManagementMode::PowerSave => 200,
+            PowerManagementMode::Performance => 20,
+            PowerManagementMode::ThroughputThrottling => 0, // value doesn't matter
+            PowerManagementMode::None => 0,                 // value doesn't matter
+        }
+    }
+
+    fn beacon_period(&self) -> u8 {
+        match self {
+            PowerManagementMode::SuperSave => 255,
+            PowerManagementMode::Aggressive => 1,
+            PowerManagementMode::PowerSave => 1,
+            PowerManagementMode::Performance => 1,
+            PowerManagementMode::ThroughputThrottling => 0, // value doesn't matter
+            PowerManagementMode::None => 0,                 // value doesn't matter
+        }
+    }
+
+    fn dtim_period(&self) -> u8 {
+        match self {
+            PowerManagementMode::SuperSave => 255,
+            PowerManagementMode::Aggressive => 1,
+            PowerManagementMode::PowerSave => 1,
+            PowerManagementMode::Performance => 1,
+            PowerManagementMode::ThroughputThrottling => 0, // value doesn't matter
+            PowerManagementMode::None => 0,                 // value doesn't matter
+        }
+    }
+
+    fn assoc(&self) -> u8 {
+        match self {
+            PowerManagementMode::SuperSave => 255,
+            PowerManagementMode::Aggressive => 10,
+            PowerManagementMode::PowerSave => 10,
+            PowerManagementMode::Performance => 1,
+            PowerManagementMode::ThroughputThrottling => 0, // value doesn't matter
+            PowerManagementMode::None => 0,                 // value doesn't matter
+        }
+    }
+
+    fn mode(&self) -> u32 {
+        match self {
+            PowerManagementMode::ThroughputThrottling => 1,
+            PowerManagementMode::None => 0,
+            _ => 2,
+        }
+    }
+}
+
+pub type NetDriver<'a> = ch::Device<'a, MTU>;
+
+pub async fn new<'a, PWR, SPI>(
+    state: &'a mut State,
+    pwr: PWR,
+    spi: SPI,
+    firmware: &[u8],
+) -> (NetDriver<'a>, Control<'a>, Runner<'a, PWR, SPI>)
+where
+    PWR: OutputPin,
+    SPI: SpiBusCyw43,
+{
+    let (ch_runner, device) = ch::new(&mut state.ch, [0; 6]);
+    let state_ch = ch_runner.state_runner();
+
+    let mut runner = Runner::new(ch_runner, Bus::new(pwr, spi), &state.ioctl_state, &state.events);
+
+    runner.init(firmware).await;
+
+    (
+        device,
+        Control::new(state_ch, &state.events, &state.ioctl_state),
+        runner,
+    )
+}
+
+fn slice8_mut(x: &mut [u32]) -> &mut [u8] {
+    let len = x.len() * 4;
+    unsafe { slice::from_raw_parts_mut(x.as_mut_ptr() as _, len) }
+}

cyw43/src/nvram.rs

@@ -0,0 +1,54 @@
+macro_rules! nvram {
+    ($($s:literal,)*) => {
+        concat_bytes!($($s, b"\x00",)* b"\x00\x00")
+    };
+}
+
+pub static NVRAM: &'static [u8] = &*nvram!(
+    b"NVRAMRev=$Rev$",
+    b"manfid=0x2d0",
+    b"prodid=0x0727",
+    b"vendid=0x14e4",
+    b"devid=0x43e2",
+    b"boardtype=0x0887",
+    b"boardrev=0x1100",
+    b"boardnum=22",
+    b"macaddr=00:A0:50:b5:59:5e",
+    b"sromrev=11",
+    b"boardflags=0x00404001",
+    b"boardflags3=0x04000000",
+    b"xtalfreq=37400",
+    b"nocrc=1",
+    b"ag0=255",
+    b"aa2g=1",
+    b"ccode=ALL",
+    b"pa0itssit=0x20",
+    b"extpagain2g=0",
+    b"pa2ga0=-168,6649,-778",
+    b"AvVmid_c0=0x0,0xc8",
+    b"cckpwroffset0=5",
+    b"maxp2ga0=84",
+    b"txpwrbckof=6",
+    b"cckbw202gpo=0",
+    b"legofdmbw202gpo=0x66111111",
+    b"mcsbw202gpo=0x77711111",
+    b"propbw202gpo=0xdd",
+    b"ofdmdigfilttype=18",
+    b"ofdmdigfilttypebe=18",
+    b"papdmode=1",
+    b"papdvalidtest=1",
+    b"pacalidx2g=45",
+    b"papdepsoffset=-30",
+    b"papdendidx=58",
+    b"ltecxmux=0",
+    b"ltecxpadnum=0x0102",
+    b"ltecxfnsel=0x44",
+    b"ltecxgcigpio=0x01",
+    b"il0macaddr=00:90:4c:c5:12:38",
+    b"wl0id=0x431b",
+    b"deadman_to=0xffffffff",
+    b"muxenab=0x100",
+    b"spurconfig=0x3",
+    b"glitch_based_crsmin=1",
+    b"btc_mode=1",
+);

cyw43/src/runner.rs

@@ -0,0 +1,575 @@
+use embassy_futures::select::{select3, Either3};
+use embassy_net_driver_channel as ch;
+use embassy_sync::pubsub::PubSubBehavior;
+use embassy_time::{block_for, Duration, Timer};
+use embedded_hal_1::digital::OutputPin;
+
+use crate::bus::Bus;
+pub use crate::bus::SpiBusCyw43;
+use crate::consts::*;
+use crate::events::{Event, Events, Status};
+use crate::fmt::Bytes;
+use crate::ioctl::{IoctlState, IoctlType, PendingIoctl};
+use crate::nvram::NVRAM;
+use crate::structs::*;
+use crate::{events, slice8_mut, Core, CHIP, MTU};
+
+#[cfg(feature = "firmware-logs")]
+struct LogState {
+    addr: u32,
+    last_idx: usize,
+    buf: [u8; 256],
+    buf_count: usize,
+}
+
+#[cfg(feature = "firmware-logs")]
+impl Default for LogState {
+    fn default() -> Self {
+        Self {
+            addr: Default::default(),
+            last_idx: Default::default(),
+            buf: [0; 256],
+            buf_count: Default::default(),
+        }
+    }
+}
+
+pub struct Runner<'a, PWR, SPI> {
+    ch: ch::Runner<'a, MTU>,
+    bus: Bus<PWR, SPI>,
+
+    ioctl_state: &'a IoctlState,
+    ioctl_id: u16,
+    sdpcm_seq: u8,
+    sdpcm_seq_max: u8,
+
+    events: &'a Events,
+
+    #[cfg(feature = "firmware-logs")]
+    log: LogState,
+}
+
+impl<'a, PWR, SPI> Runner<'a, PWR, SPI>
+where
+    PWR: OutputPin,
+    SPI: SpiBusCyw43,
+{
+    pub(crate) fn new(
+        ch: ch::Runner<'a, MTU>,
+        bus: Bus<PWR, SPI>,
+        ioctl_state: &'a IoctlState,
+        events: &'a Events,
+    ) -> Self {
+        Self {
+            ch,
+            bus,
+            ioctl_state,
+            ioctl_id: 0,
+            sdpcm_seq: 0,
+            sdpcm_seq_max: 1,
+            events,
+            #[cfg(feature = "firmware-logs")]
+            log: LogState::default(),
+        }
+    }
+
+    pub(crate) async fn init(&mut self, firmware: &[u8]) {
+        self.bus.init().await;
+
+        // Init ALP (Active Low Power) clock
+        self.bus
+            .write8(FUNC_BACKPLANE, REG_BACKPLANE_CHIP_CLOCK_CSR, BACKPLANE_ALP_AVAIL_REQ)
+            .await;
+        debug!("waiting for clock...");
+        while self.bus.read8(FUNC_BACKPLANE, REG_BACKPLANE_CHIP_CLOCK_CSR).await & BACKPLANE_ALP_AVAIL == 0 {}
+        debug!("clock ok");
+
+        let chip_id = self.bus.bp_read16(0x1800_0000).await;
+        debug!("chip ID: {}", chip_id);
+
+        // Upload firmware.
+        self.core_disable(Core::WLAN).await;
+        self.core_reset(Core::SOCSRAM).await;
+        self.bus.bp_write32(CHIP.socsram_base_address + 0x10, 3).await;
+        self.bus.bp_write32(CHIP.socsram_base_address + 0x44, 0).await;
+
+        let ram_addr = CHIP.atcm_ram_base_address;
+
+        debug!("loading fw");
+        self.bus.bp_write(ram_addr, firmware).await;
+
+        debug!("loading nvram");
+        // Round up to 4 bytes.
+        let nvram_len = (NVRAM.len() + 3) / 4 * 4;
+        self.bus
+            .bp_write(ram_addr + CHIP.chip_ram_size - 4 - nvram_len as u32, NVRAM)
+            .await;
+
+        let nvram_len_words = nvram_len as u32 / 4;
+        let nvram_len_magic = (!nvram_len_words << 16) | nvram_len_words;
+        self.bus
+            .bp_write32(ram_addr + CHIP.chip_ram_size - 4, nvram_len_magic)
+            .await;
+
+        // Start core!
+        debug!("starting up core...");
+        self.core_reset(Core::WLAN).await;
+        assert!(self.core_is_up(Core::WLAN).await);
+
+        while self.bus.read8(FUNC_BACKPLANE, REG_BACKPLANE_CHIP_CLOCK_CSR).await & 0x80 == 0 {}
+
+        // "Set up the interrupt mask and enable interrupts"
+        // self.bus.bp_write32(CHIP.sdiod_core_base_address + 0x24, 0xF0).await;
+
+        self.bus
+            .write16(FUNC_BUS, REG_BUS_INTERRUPT_ENABLE, IRQ_F2_PACKET_AVAILABLE)
+            .await;
+
+        // "Lower F2 Watermark to avoid DMA Hang in F2 when SD Clock is stopped."
+        // Sounds scary...
+        self.bus
+            .write8(FUNC_BACKPLANE, REG_BACKPLANE_FUNCTION2_WATERMARK, 32)
+            .await;
+
+        // wait for wifi startup
+        debug!("waiting for wifi init...");
+        while self.bus.read32(FUNC_BUS, REG_BUS_STATUS).await & STATUS_F2_RX_READY == 0 {}
+
+        // Some random configs related to sleep.
+        // These aren't needed if we don't want to sleep the bus.
+        // TODO do we need to sleep the bus to read the irq line, due to
+        // being on the same pin as MOSI/MISO?
+
+        /*
+        let mut val = self.bus.read8(FUNC_BACKPLANE, REG_BACKPLANE_WAKEUP_CTRL).await;
+        val |= 0x02; // WAKE_TILL_HT_AVAIL
+        self.bus.write8(FUNC_BACKPLANE, REG_BACKPLANE_WAKEUP_CTRL, val).await;
+        self.bus.write8(FUNC_BUS, 0xF0, 0x08).await; // SDIOD_CCCR_BRCM_CARDCAP.CMD_NODEC = 1
+        self.bus.write8(FUNC_BACKPLANE, REG_BACKPLANE_CHIP_CLOCK_CSR, 0x02).await; // SBSDIO_FORCE_HT
+
+        let mut val = self.bus.read8(FUNC_BACKPLANE, REG_BACKPLANE_SLEEP_CSR).await;
+        val |= 0x01; // SBSDIO_SLPCSR_KEEP_SDIO_ON
+        self.bus.write8(FUNC_BACKPLANE, REG_BACKPLANE_SLEEP_CSR, val).await;
+         */
+
+        // clear pulls
+        self.bus.write8(FUNC_BACKPLANE, REG_BACKPLANE_PULL_UP, 0).await;
+        let _ = self.bus.read8(FUNC_BACKPLANE, REG_BACKPLANE_PULL_UP).await;
+
+        // start HT clock
+        //self.bus.write8(FUNC_BACKPLANE, REG_BACKPLANE_CHIP_CLOCK_CSR, 0x10).await;
+        //debug!("waiting for HT clock...");
+        //while self.bus.read8(FUNC_BACKPLANE, REG_BACKPLANE_CHIP_CLOCK_CSR).await & 0x80 == 0 {}
+        //debug!("clock ok");
+
+        #[cfg(feature = "firmware-logs")]
+        self.log_init().await;
+
+        debug!("wifi init done");
+    }
+
+    #[cfg(feature = "firmware-logs")]
+    async fn log_init(&mut self) {
+        // Initialize shared memory for logging.
+
+        let addr = CHIP.atcm_ram_base_address + CHIP.chip_ram_size - 4 - CHIP.socram_srmem_size;
+        let shared_addr = self.bus.bp_read32(addr).await;
+        debug!("shared_addr {:08x}", shared_addr);
+
+        let mut shared = [0; SharedMemData::SIZE];
+        self.bus.bp_read(shared_addr, &mut shared).await;
+        let shared = SharedMemData::from_bytes(&shared);
+
+        self.log.addr = shared.console_addr + 8;
+    }
+
+    #[cfg(feature = "firmware-logs")]
+    async fn log_read(&mut self) {
+        // Read log struct
+        let mut log = [0; SharedMemLog::SIZE];
+        self.bus.bp_read(self.log.addr, &mut log).await;
+        let log = SharedMemLog::from_bytes(&log);
+
+        let idx = log.idx as usize;
+
+        // If pointer hasn't moved, no need to do anything.
+        if idx == self.log.last_idx {
+            return;
+        }
+
+        // Read entire buf for now. We could read only what we need, but then we
+        // run into annoying alignment issues in `bp_read`.
+        let mut buf = [0; 0x400];
+        self.bus.bp_read(log.buf, &mut buf).await;
+
+        while self.log.last_idx != idx as usize {
+            let b = buf[self.log.last_idx];
+            if b == b'\r' || b == b'\n' {
+                if self.log.buf_count != 0 {
+                    let s = unsafe { core::str::from_utf8_unchecked(&self.log.buf[..self.log.buf_count]) };
+                    debug!("LOGS: {}", s);
+                    self.log.buf_count = 0;
+                }
+            } else if self.log.buf_count < self.log.buf.len() {
+                self.log.buf[self.log.buf_count] = b;
+                self.log.buf_count += 1;
+            }
+
+            self.log.last_idx += 1;
+            if self.log.last_idx == 0x400 {
+                self.log.last_idx = 0;
+            }
+        }
+    }
+
+    pub async fn run(mut self) -> ! {
+        let mut buf = [0; 512];
+        loop {
+            #[cfg(feature = "firmware-logs")]
+            self.log_read().await;
+
+            if self.has_credit() {
+                let ioctl = self.ioctl_state.wait_pending();
+                let tx = self.ch.tx_buf();
+                let ev = self.bus.wait_for_event();
+
+                match select3(ioctl, tx, ev).await {
+                    Either3::First(PendingIoctl {
+                        buf: iobuf,
+                        kind,
+                        cmd,
+                        iface,
+                    }) => {
+                        self.send_ioctl(kind, cmd, iface, unsafe { &*iobuf }).await;
+                        self.check_status(&mut buf).await;
+                    }
+                    Either3::Second(packet) => {
+                        trace!("tx pkt {:02x}", Bytes(&packet[..packet.len().min(48)]));
+
+                        let mut buf = [0; 512];
+                        let buf8 = slice8_mut(&mut buf);
+
+                        // There MUST be 2 bytes of padding between the SDPCM and BDC headers.
+                        // And ONLY for data packets!
+                        // No idea why, but the firmware will append two zero bytes to the tx'd packets
+                        // otherwise. If the packet is exactly 1514 bytes (the max MTU), this makes it
+                        // be oversized and get dropped.
+                        // WHD adds it here https://github.com/Infineon/wifi-host-driver/blob/c04fcbb6b0d049304f376cf483fd7b1b570c8cd5/WiFi_Host_Driver/src/include/whd_sdpcm.h#L90
+                        // and adds it to the header size her https://github.com/Infineon/wifi-host-driver/blob/c04fcbb6b0d049304f376cf483fd7b1b570c8cd5/WiFi_Host_Driver/src/whd_sdpcm.c#L597
+                        // ¯\_(ツ)_/¯
+                        const PADDING_SIZE: usize = 2;
+                        let total_len = SdpcmHeader::SIZE + PADDING_SIZE + BdcHeader::SIZE + packet.len();
+
+                        let seq = self.sdpcm_seq;
+                        self.sdpcm_seq = self.sdpcm_seq.wrapping_add(1);
+
+                        let sdpcm_header = SdpcmHeader {
+                            len: total_len as u16, // TODO does this len need to be rounded up to u32?
+                            len_inv: !total_len as u16,
+                            sequence: seq,
+                            channel_and_flags: CHANNEL_TYPE_DATA,
+                            next_length: 0,
+                            header_length: (SdpcmHeader::SIZE + PADDING_SIZE) as _,
+                            wireless_flow_control: 0,
+                            bus_data_credit: 0,
+                            reserved: [0, 0],
+                        };
+
+                        let bdc_header = BdcHeader {
+                            flags: BDC_VERSION << BDC_VERSION_SHIFT,
+                            priority: 0,
+                            flags2: 0,
+                            data_offset: 0,
+                        };
+                        trace!("tx {:?}", sdpcm_header);
+                        trace!("    {:?}", bdc_header);
+
+                        buf8[0..SdpcmHeader::SIZE].copy_from_slice(&sdpcm_header.to_bytes());
+                        buf8[SdpcmHeader::SIZE + PADDING_SIZE..][..BdcHeader::SIZE]
+                            .copy_from_slice(&bdc_header.to_bytes());
+                        buf8[SdpcmHeader::SIZE + PADDING_SIZE + BdcHeader::SIZE..][..packet.len()]
+                            .copy_from_slice(packet);
+
+                        let total_len = (total_len + 3) & !3; // round up to 4byte
+
+                        trace!("    {:02x}", Bytes(&buf8[..total_len.min(48)]));
+
+                        self.bus.wlan_write(&buf[..(total_len / 4)]).await;
+                        self.ch.tx_done();
+                        self.check_status(&mut buf).await;
+                    }
+                    Either3::Third(()) => {
+                        self.handle_irq(&mut buf).await;
+                    }
+                }
+            } else {
+                warn!("TX stalled");
+                self.bus.wait_for_event().await;
+                self.handle_irq(&mut buf).await;
+            }
+        }
+    }
+
+    /// Wait for IRQ on F2 packet available
+    async fn handle_irq(&mut self, buf: &mut [u32; 512]) {
+        // Receive stuff
+        let irq = self.bus.read16(FUNC_BUS, REG_BUS_INTERRUPT).await;
+        trace!("irq{}", FormatInterrupt(irq));
+
+        if irq & IRQ_F2_PACKET_AVAILABLE != 0 {
+            self.check_status(buf).await;
+        }
+
+        if irq & IRQ_DATA_UNAVAILABLE != 0 {
+            // TODO what should we do here?
+            warn!("IRQ DATA_UNAVAILABLE, clearing...");
+            self.bus.write16(FUNC_BUS, REG_BUS_INTERRUPT, 1).await;
+        }
+    }
+
+    /// Handle F2 events while status register is set
+    async fn check_status(&mut self, buf: &mut [u32; 512]) {
+        loop {
+            let status = self.bus.status();
+            trace!("check status{}", FormatStatus(status));
+
+            if status & STATUS_F2_PKT_AVAILABLE != 0 {
+                let len = (status & STATUS_F2_PKT_LEN_MASK) >> STATUS_F2_PKT_LEN_SHIFT;
+                self.bus.wlan_read(buf, len).await;
+                trace!("rx {:02x}", Bytes(&slice8_mut(buf)[..(len as usize).min(48)]));
+                self.rx(&mut slice8_mut(buf)[..len as usize]);
+            } else {
+                break;
+            }
+        }
+    }
+
+    fn rx(&mut self, packet: &mut [u8]) {
+        let Some((sdpcm_header, payload)) = SdpcmHeader::parse(packet) else { return };
+
+        self.update_credit(&sdpcm_header);
+
+        let channel = sdpcm_header.channel_and_flags & 0x0f;
+
+        match channel {
+            CHANNEL_TYPE_CONTROL => {
+                let Some((cdc_header, response)) = CdcHeader::parse(payload) else { return; };
+                trace!("    {:?}", cdc_header);
+
+                if cdc_header.id == self.ioctl_id {
+                    if cdc_header.status != 0 {
+                        // TODO: propagate error instead
+                        panic!("IOCTL error {}", cdc_header.status as i32);
+                    }
+
+                    self.ioctl_state.ioctl_done(response);
+                }
+            }
+            CHANNEL_TYPE_EVENT => {
+                let Some((_, bdc_packet)) = BdcHeader::parse(payload) else {
+                    warn!("BDC event, incomplete header");
+                    return;
+                };
+
+                let Some((event_packet, evt_data)) = EventPacket::parse(bdc_packet) else {
+                    warn!("BDC event, incomplete data");
+                    return;
+                };
+
+                const ETH_P_LINK_CTL: u16 = 0x886c; // HPNA, wlan link local tunnel, according to linux if_ether.h
+                if event_packet.eth.ether_type != ETH_P_LINK_CTL {
+                    warn!(
+                        "unexpected ethernet type 0x{:04x}, expected Broadcom ether type 0x{:04x}",
+                        event_packet.eth.ether_type, ETH_P_LINK_CTL
+                    );
+                    return;
+                }
+                const BROADCOM_OUI: &[u8] = &[0x00, 0x10, 0x18];
+                if event_packet.hdr.oui != BROADCOM_OUI {
+                    warn!(
+                        "unexpected ethernet OUI {:02x}, expected Broadcom OUI {:02x}",
+                        Bytes(&event_packet.hdr.oui),
+                        Bytes(BROADCOM_OUI)
+                    );
+                    return;
+                }
+                const BCMILCP_SUBTYPE_VENDOR_LONG: u16 = 32769;
+                if event_packet.hdr.subtype != BCMILCP_SUBTYPE_VENDOR_LONG {
+                    warn!("unexpected subtype {}", event_packet.hdr.subtype);
+                    return;
+                }
+
+                const BCMILCP_BCM_SUBTYPE_EVENT: u16 = 1;
+                if event_packet.hdr.user_subtype != BCMILCP_BCM_SUBTYPE_EVENT {
+                    warn!("unexpected user_subtype {}", event_packet.hdr.subtype);
+                    return;
+                }
+
+                let evt_type = events::Event::from(event_packet.msg.event_type as u8);
+                debug!(
+                    "=== EVENT {:?}: {:?} {:02x}",
+                    evt_type,
+                    event_packet.msg,
+                    Bytes(evt_data)
+                );
+
+                if self.events.mask.is_enabled(evt_type) {
+                    let status = event_packet.msg.status;
+                    let event_payload = match evt_type {
+                        Event::ESCAN_RESULT if status == EStatus::PARTIAL => {
+                            let Some((_, bss_info)) = ScanResults::parse(evt_data) else { return };
+                            let Some(bss_info) = BssInfo::parse(bss_info) else { return };
+                            events::Payload::BssInfo(*bss_info)
+                        }
+                        Event::ESCAN_RESULT => events::Payload::None,
+                        _ => events::Payload::None,
+                    };
+
+                    // this intentionally uses the non-blocking publish immediate
+                    // publish() is a deadlock risk in the current design as awaiting here prevents ioctls
+                    // The `Runner` always yields when accessing the device, so consumers always have a chance to receive the event
+                    // (if they are actively awaiting the queue)
+                    self.events.queue.publish_immediate(events::Message::new(
+                        Status {
+                            event_type: evt_type,
+                            status,
+                        },
+                        event_payload,
+                    ));
+                }
+            }
+            CHANNEL_TYPE_DATA => {
+                let Some((_, packet)) = BdcHeader::parse(payload) else { return };
+                trace!("rx pkt {:02x}", Bytes(&packet[..packet.len().min(48)]));
+
+                match self.ch.try_rx_buf() {
+                    Some(buf) => {
+                        buf[..packet.len()].copy_from_slice(packet);
+                        self.ch.rx_done(packet.len())
+                    }
+                    None => warn!("failed to push rxd packet to the channel."),
+                }
+            }
+            _ => {}
+        }
+    }
+
+    fn update_credit(&mut self, sdpcm_header: &SdpcmHeader) {
+        if sdpcm_header.channel_and_flags & 0xf < 3 {
+            let mut sdpcm_seq_max = sdpcm_header.bus_data_credit;
+            if sdpcm_seq_max.wrapping_sub(self.sdpcm_seq) > 0x40 {
+                sdpcm_seq_max = self.sdpcm_seq + 2;
+            }
+            self.sdpcm_seq_max = sdpcm_seq_max;
+        }
+    }
+
+    fn has_credit(&self) -> bool {
+        self.sdpcm_seq != self.sdpcm_seq_max && self.sdpcm_seq_max.wrapping_sub(self.sdpcm_seq) & 0x80 == 0
+    }
+
+    async fn send_ioctl(&mut self, kind: IoctlType, cmd: u32, iface: u32, data: &[u8]) {
+        let mut buf = [0; 512];
+        let buf8 = slice8_mut(&mut buf);
+
+        let total_len = SdpcmHeader::SIZE + CdcHeader::SIZE + data.len();
+
+        let sdpcm_seq = self.sdpcm_seq;
+        self.sdpcm_seq = self.sdpcm_seq.wrapping_add(1);
+        self.ioctl_id = self.ioctl_id.wrapping_add(1);
+
+        let sdpcm_header = SdpcmHeader {
+            len: total_len as u16, // TODO does this len need to be rounded up to u32?
+            len_inv: !total_len as u16,
+            sequence: sdpcm_seq,
+            channel_and_flags: CHANNEL_TYPE_CONTROL,
+            next_length: 0,
+            header_length: SdpcmHeader::SIZE as _,
+            wireless_flow_control: 0,
+            bus_data_credit: 0,
+            reserved: [0, 0],
+        };
+
+        let cdc_header = CdcHeader {
+            cmd: cmd,
+            len: data.len() as _,
+            flags: kind as u16 | (iface as u16) << 12,
+            id: self.ioctl_id,
+            status: 0,
+        };
+        trace!("tx {:?}", sdpcm_header);
+        trace!("    {:?}", cdc_header);
+
+        buf8[0..SdpcmHeader::SIZE].copy_from_slice(&sdpcm_header.to_bytes());
+        buf8[SdpcmHeader::SIZE..][..CdcHeader::SIZE].copy_from_slice(&cdc_header.to_bytes());
+        buf8[SdpcmHeader::SIZE + CdcHeader::SIZE..][..data.len()].copy_from_slice(data);
+
+        let total_len = (total_len + 3) & !3; // round up to 4byte
+
+        trace!("    {:02x}", Bytes(&buf8[..total_len.min(48)]));
+
+        self.bus.wlan_write(&buf[..total_len / 4]).await;
+    }
+
+    async fn core_disable(&mut self, core: Core) {
+        let base = core.base_addr();
+
+        // Dummy read?
+        let _ = self.bus.bp_read8(base + AI_RESETCTRL_OFFSET).await;
+
+        // Check it isn't already reset
+        let r = self.bus.bp_read8(base + AI_RESETCTRL_OFFSET).await;
+        if r & AI_RESETCTRL_BIT_RESET != 0 {
+            return;
+        }
+
+        self.bus.bp_write8(base + AI_IOCTRL_OFFSET, 0).await;
+        let _ = self.bus.bp_read8(base + AI_IOCTRL_OFFSET).await;
+
+        block_for(Duration::from_millis(1));
+
+        self.bus
+            .bp_write8(base + AI_RESETCTRL_OFFSET, AI_RESETCTRL_BIT_RESET)
+            .await;
+        let _ = self.bus.bp_read8(base + AI_RESETCTRL_OFFSET).await;
+    }
+
+    async fn core_reset(&mut self, core: Core) {
+        self.core_disable(core).await;
+
+        let base = core.base_addr();
+        self.bus
+            .bp_write8(base + AI_IOCTRL_OFFSET, AI_IOCTRL_BIT_FGC | AI_IOCTRL_BIT_CLOCK_EN)
+            .await;
+        let _ = self.bus.bp_read8(base + AI_IOCTRL_OFFSET).await;
+
+        self.bus.bp_write8(base + AI_RESETCTRL_OFFSET, 0).await;
+
+        Timer::after(Duration::from_millis(1)).await;
+
+        self.bus
+            .bp_write8(base + AI_IOCTRL_OFFSET, AI_IOCTRL_BIT_CLOCK_EN)
+            .await;
+        let _ = self.bus.bp_read8(base + AI_IOCTRL_OFFSET).await;
+
+        Timer::after(Duration::from_millis(1)).await;
+    }
+
+    async fn core_is_up(&mut self, core: Core) -> bool {
+        let base = core.base_addr();
+
+        let io = self.bus.bp_read8(base + AI_IOCTRL_OFFSET).await;
+        if io & (AI_IOCTRL_BIT_FGC | AI_IOCTRL_BIT_CLOCK_EN) != AI_IOCTRL_BIT_CLOCK_EN {
+            debug!("core_is_up: returning false due to bad ioctrl {:02x}", io);
+            return false;
+        }
+
+        let r = self.bus.bp_read8(base + AI_RESETCTRL_OFFSET).await;
+        if r & (AI_RESETCTRL_BIT_RESET) != 0 {
+            debug!("core_is_up: returning false due to bad resetctrl {:02x}", r);
+            return false;
+        }
+
+        true
+    }
+}

cyw43/src/structs.rs

@@ -0,0 +1,496 @@
+use crate::events::Event;
+use crate::fmt::Bytes;
+
+macro_rules! impl_bytes {
+    ($t:ident) => {
+        impl $t {
+            pub const SIZE: usize = core::mem::size_of::<Self>();
+
+            #[allow(unused)]
+            pub fn to_bytes(&self) -> [u8; Self::SIZE] {
+                unsafe { core::mem::transmute(*self) }
+            }
+
+            #[allow(unused)]
+            pub fn from_bytes(bytes: &[u8; Self::SIZE]) -> &Self {
+                let alignment = core::mem::align_of::<Self>();
+                assert_eq!(
+                    bytes.as_ptr().align_offset(alignment),
+                    0,
+                    "{} is not aligned",
+                    core::any::type_name::<Self>()
+                );
+                unsafe { core::mem::transmute(bytes) }
+            }
+
+            #[allow(unused)]
+            pub fn from_bytes_mut(bytes: &mut [u8; Self::SIZE]) -> &mut Self {
+                let alignment = core::mem::align_of::<Self>();
+                assert_eq!(
+                    bytes.as_ptr().align_offset(alignment),
+                    0,
+                    "{} is not aligned",
+                    core::any::type_name::<Self>()
+                );
+
+                unsafe { core::mem::transmute(bytes) }
+            }
+        }
+    };
+}
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct SharedMemData {
+    pub flags: u32,
+    pub trap_addr: u32,
+    pub assert_exp_addr: u32,
+    pub assert_file_addr: u32,
+    pub assert_line: u32,
+    pub console_addr: u32,
+    pub msgtrace_addr: u32,
+    pub fwid: u32,
+}
+impl_bytes!(SharedMemData);
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct SharedMemLog {
+    pub buf: u32,
+    pub buf_size: u32,
+    pub idx: u32,
+    pub out_idx: u32,
+}
+impl_bytes!(SharedMemLog);
+
+#[derive(Debug, Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct SdpcmHeader {
+    pub len: u16,
+    pub len_inv: u16,
+    /// Rx/Tx sequence number
+    pub sequence: u8,
+    ///  4 MSB Channel number, 4 LSB arbitrary flag
+    pub channel_and_flags: u8,
+    /// Length of next data frame, reserved for Tx
+    pub next_length: u8,
+    /// Data offset
+    pub header_length: u8,
+    /// Flow control bits, reserved for Tx
+    pub wireless_flow_control: u8,
+    /// Maximum Sequence number allowed by firmware for Tx
+    pub bus_data_credit: u8,
+    /// Reserved
+    pub reserved: [u8; 2],
+}
+impl_bytes!(SdpcmHeader);
+
+impl SdpcmHeader {
+    pub fn parse(packet: &mut [u8]) -> Option<(&mut Self, &mut [u8])> {
+        let packet_len = packet.len();
+        if packet_len < Self::SIZE {
+            warn!("packet too short, len={}", packet.len());
+            return None;
+        }
+        let (sdpcm_header, sdpcm_packet) = packet.split_at_mut(Self::SIZE);
+        let sdpcm_header = Self::from_bytes_mut(sdpcm_header.try_into().unwrap());
+        trace!("rx {:?}", sdpcm_header);
+
+        if sdpcm_header.len != !sdpcm_header.len_inv {
+            warn!("len inv mismatch");
+            return None;
+        }
+
+        if sdpcm_header.len as usize != packet_len {
+            warn!("len from header doesn't match len from spi");
+            return None;
+        }
+
+        let sdpcm_packet = &mut sdpcm_packet[(sdpcm_header.header_length as usize - Self::SIZE)..];
+        Some((sdpcm_header, sdpcm_packet))
+    }
+}
+
+#[derive(Debug, Clone, Copy)]
+#[repr(C, packed(2))]
+pub struct CdcHeader {
+    pub cmd: u32,
+    pub len: u32,
+    pub flags: u16,
+    pub id: u16,
+    pub status: u32,
+}
+impl_bytes!(CdcHeader);
+
+#[cfg(feature = "defmt")]
+impl defmt::Format for CdcHeader {
+    fn format(&self, fmt: defmt::Formatter) {
+        fn copy<T: Copy>(t: T) -> T {
+            t
+        }
+
+        defmt::write!(
+            fmt,
+            "CdcHeader{{cmd: {=u32:08x}, len: {=u32:08x}, flags: {=u16:04x}, id: {=u16:04x}, status: {=u32:08x}}}",
+            copy(self.cmd),
+            copy(self.len),
+            copy(self.flags),
+            copy(self.id),
+            copy(self.status),
+        )
+    }
+}
+
+impl CdcHeader {
+    pub fn parse(packet: &mut [u8]) -> Option<(&mut Self, &mut [u8])> {
+        if packet.len() < Self::SIZE {
+            warn!("payload too short, len={}", packet.len());
+            return None;
+        }
+
+        let (cdc_header, payload) = packet.split_at_mut(Self::SIZE);
+        let cdc_header = Self::from_bytes_mut(cdc_header.try_into().unwrap());
+
+        let payload = &mut payload[..cdc_header.len as usize];
+        Some((cdc_header, payload))
+    }
+}
+
+pub const BDC_VERSION: u8 = 2;
+pub const BDC_VERSION_SHIFT: u8 = 4;
+
+#[derive(Debug, Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct BdcHeader {
+    pub flags: u8,
+    /// 802.1d Priority (low 3 bits)
+    pub priority: u8,
+    pub flags2: u8,
+    /// Offset from end of BDC header to packet data, in 4-uint8_t words. Leaves room for optional headers.
+    pub data_offset: u8,
+}
+impl_bytes!(BdcHeader);
+
+impl BdcHeader {
+    pub fn parse(packet: &mut [u8]) -> Option<(&mut Self, &mut [u8])> {
+        if packet.len() < Self::SIZE {
+            return None;
+        }
+
+        let (bdc_header, bdc_packet) = packet.split_at_mut(Self::SIZE);
+        let bdc_header = Self::from_bytes_mut(bdc_header.try_into().unwrap());
+        trace!("    {:?}", bdc_header);
+
+        let packet_start = 4 * bdc_header.data_offset as usize;
+
+        let bdc_packet = bdc_packet.get_mut(packet_start..)?;
+        trace!("    {:02x}", Bytes(&bdc_packet[..bdc_packet.len().min(36)]));
+
+        Some((bdc_header, bdc_packet))
+    }
+}
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct EthernetHeader {
+    pub destination_mac: [u8; 6],
+    pub source_mac: [u8; 6],
+    pub ether_type: u16,
+}
+
+impl EthernetHeader {
+    pub fn byteswap(&mut self) {
+        self.ether_type = self.ether_type.to_be();
+    }
+}
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct EventHeader {
+    pub subtype: u16,
+    pub length: u16,
+    pub version: u8,
+    pub oui: [u8; 3],
+    pub user_subtype: u16,
+}
+
+impl EventHeader {
+    pub fn byteswap(&mut self) {
+        self.subtype = self.subtype.to_be();
+        self.length = self.length.to_be();
+        self.user_subtype = self.user_subtype.to_be();
+    }
+}
+
+#[derive(Debug, Clone, Copy)]
+// #[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C, packed(2))]
+pub struct EventMessage {
+    /// version   
+    pub version: u16,
+    /// see flags below
+    pub flags: u16,
+    /// Message (see below)
+    pub event_type: u32,
+    /// Status code (see below)
+    pub status: u32,
+    /// Reason code (if applicable)
+    pub reason: u32,
+    /// WLC_E_AUTH
+    pub auth_type: u32,
+    /// data buf
+    pub datalen: u32,
+    /// Station address (if applicable)
+    pub addr: [u8; 6],
+    /// name of the incoming packet interface
+    pub ifname: [u8; 16],
+    /// destination OS i/f index
+    pub ifidx: u8,
+    /// source bsscfg index
+    pub bsscfgidx: u8,
+}
+impl_bytes!(EventMessage);
+
+#[cfg(feature = "defmt")]
+impl defmt::Format for EventMessage {
+    fn format(&self, fmt: defmt::Formatter) {
+        let event_type = self.event_type;
+        let status = self.status;
+        let reason = self.reason;
+        let auth_type = self.auth_type;
+        let datalen = self.datalen;
+
+        defmt::write!(
+            fmt,
+            "EventMessage {{ \
+            version: {=u16}, \
+            flags: {=u16}, \
+            event_type: {=u32}, \
+            status: {=u32}, \
+            reason: {=u32}, \
+            auth_type: {=u32}, \
+            datalen: {=u32}, \
+            addr: {=[u8; 6]:x}, \
+            ifname: {=[u8; 16]:x}, \
+            ifidx: {=u8}, \
+            bsscfgidx: {=u8}, \
+        }} ",
+            self.version,
+            self.flags,
+            event_type,
+            status,
+            reason,
+            auth_type,
+            datalen,
+            self.addr,
+            self.ifname,
+            self.ifidx,
+            self.bsscfgidx
+        );
+    }
+}
+
+impl EventMessage {
+    pub fn byteswap(&mut self) {
+        self.version = self.version.to_be();
+        self.flags = self.flags.to_be();
+        self.event_type = self.event_type.to_be();
+        self.status = self.status.to_be();
+        self.reason = self.reason.to_be();
+        self.auth_type = self.auth_type.to_be();
+        self.datalen = self.datalen.to_be();
+    }
+}
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C, packed(2))]
+pub struct EventPacket {
+    pub eth: EthernetHeader,
+    pub hdr: EventHeader,
+    pub msg: EventMessage,
+}
+impl_bytes!(EventPacket);
+
+impl EventPacket {
+    pub fn parse(packet: &mut [u8]) -> Option<(&mut Self, &mut [u8])> {
+        if packet.len() < Self::SIZE {
+            return None;
+        }
+
+        let (event_header, event_packet) = packet.split_at_mut(Self::SIZE);
+        let event_header = Self::from_bytes_mut(event_header.try_into().unwrap());
+        // warn!("event_header {:x}", event_header as *const _);
+        event_header.byteswap();
+
+        let event_packet = event_packet.get_mut(..event_header.msg.datalen as usize)?;
+
+        Some((event_header, event_packet))
+    }
+
+    pub fn byteswap(&mut self) {
+        self.eth.byteswap();
+        self.hdr.byteswap();
+        self.msg.byteswap();
+    }
+}
+
+#[derive(Clone, Copy)]
+#[repr(C)]
+pub struct DownloadHeader {
+    pub flag: u16, //
+    pub dload_type: u16,
+    pub len: u32,
+    pub crc: u32,
+}
+impl_bytes!(DownloadHeader);
+
+#[allow(unused)]
+pub const DOWNLOAD_FLAG_NO_CRC: u16 = 0x0001;
+pub const DOWNLOAD_FLAG_BEGIN: u16 = 0x0002;
+pub const DOWNLOAD_FLAG_END: u16 = 0x0004;
+pub const DOWNLOAD_FLAG_HANDLER_VER: u16 = 0x1000;
+
+// Country Locale Matrix (CLM)
+pub const DOWNLOAD_TYPE_CLM: u16 = 2;
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct CountryInfo {
+    pub country_abbrev: [u8; 4],
+    pub rev: i32,
+    pub country_code: [u8; 4],
+}
+impl_bytes!(CountryInfo);
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct SsidInfo {
+    pub len: u32,
+    pub ssid: [u8; 32],
+}
+impl_bytes!(SsidInfo);
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct PassphraseInfo {
+    pub len: u16,
+    pub flags: u16,
+    pub passphrase: [u8; 64],
+}
+impl_bytes!(PassphraseInfo);
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct SsidInfoWithIndex {
+    pub index: u32,
+    pub ssid_info: SsidInfo,
+}
+impl_bytes!(SsidInfoWithIndex);
+
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct EventMask {
+    pub iface: u32,
+    pub events: [u8; 24],
+}
+impl_bytes!(EventMask);
+
+impl EventMask {
+    pub fn unset(&mut self, evt: Event) {
+        let evt = evt as u8 as usize;
+        self.events[evt / 8] &= !(1 << (evt % 8));
+    }
+}
+
+/// Parameters for a wifi scan
+#[derive(Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C)]
+pub struct ScanParams {
+    pub version: u32,
+    pub action: u16,
+    pub sync_id: u16,
+    pub ssid_len: u32,
+    pub ssid: [u8; 32],
+    pub bssid: [u8; 6],
+    pub bss_type: u8,
+    pub scan_type: u8,
+    pub nprobes: u32,
+    pub active_time: u32,
+    pub passive_time: u32,
+    pub home_time: u32,
+    pub channel_num: u32,
+    pub channel_list: [u16; 1],
+}
+impl_bytes!(ScanParams);
+
+/// Wifi Scan Results Header, followed by `bss_count` `BssInfo`
+#[derive(Clone, Copy)]
+// #[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C, packed(2))]
+pub struct ScanResults {
+    pub buflen: u32,
+    pub version: u32,
+    pub sync_id: u16,
+    pub bss_count: u16,
+}
+impl_bytes!(ScanResults);
+
+impl ScanResults {
+    pub fn parse(packet: &mut [u8]) -> Option<(&mut ScanResults, &mut [u8])> {
+        if packet.len() < ScanResults::SIZE {
+            return None;
+        }
+
+        let (scan_results, bssinfo) = packet.split_at_mut(ScanResults::SIZE);
+        let scan_results = ScanResults::from_bytes_mut(scan_results.try_into().unwrap());
+
+        if scan_results.bss_count > 0 && bssinfo.len() < BssInfo::SIZE {
+            warn!("Scan result, incomplete BssInfo");
+            return None;
+        }
+
+        Some((scan_results, bssinfo))
+    }
+}
+
+/// Wifi Scan Result
+#[derive(Clone, Copy)]
+// #[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[repr(C, packed(2))]
+#[non_exhaustive]
+pub struct BssInfo {
+    pub version: u32,
+    pub length: u32,
+    pub bssid: [u8; 6],
+    pub beacon_period: u16,
+    pub capability: u16,
+    pub ssid_len: u8,
+    pub ssid: [u8; 32],
+    // there will be more stuff here
+}
+impl_bytes!(BssInfo);
+
+impl BssInfo {
+    pub fn parse(packet: &mut [u8]) -> Option<&mut Self> {
+        if packet.len() < BssInfo::SIZE {
+            return None;
+        }
+
+        Some(BssInfo::from_bytes_mut(
+            packet[..BssInfo::SIZE].as_mut().try_into().unwrap(),
+        ))
+    }
+}

examples/rp/Cargo.toml

@@ -19,6 +19,8 @@ embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["ti
 lora-phy = { version = "1" }
 lorawan-device = { version = "0.10.0", default-features = false, features = ["async", "external-lora-phy"] }
 lorawan = { version = "0.7.3", default-features = false, features = ["default-crypto"] }
+cyw43 = { path = "../../cyw43", features = ["defmt", "firmware-logs"] }
+cyw43-pio = { path = "../../cyw43-pio", features = ["defmt", "overclock"] }
 
 defmt = "0.3"
 defmt-rtt = "0.4"
@@ -36,6 +38,7 @@ st7789 = "0.6.1"
 display-interface = "0.4.1"
 byte-slice-cast = { version = "1.2.0", default-features = false }
 smart-leds = "0.3.0"
+heapless = "0.7.15"
 
 embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-alpha.10" }
 embedded-hal-async = "0.2.0-alpha.1"

examples/rp/src/bin/wifi_ap_tcp_server.rs

@@ -0,0 +1,139 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+#![feature(async_fn_in_trait)]
+#![allow(incomplete_features)]
+
+use core::str::from_utf8;
+
+use cyw43_pio::PioSpi;
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_net::tcp::TcpSocket;
+use embassy_net::{Config, Stack, StackResources};
+use embassy_rp::gpio::{Level, Output};
+use embassy_rp::peripherals::{DMA_CH0, PIN_23, PIN_25, PIO0};
+use embassy_rp::pio::Pio;
+use embassy_time::Duration;
+use embedded_io::asynch::Write;
+use static_cell::StaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+macro_rules! singleton {
+    ($val:expr) => {{
+        type T = impl Sized;
+        static STATIC_CELL: StaticCell<T> = StaticCell::new();
+        STATIC_CELL.init_with(move || $val)
+    }};
+}
+
+#[embassy_executor::task]
+async fn wifi_task(
+    runner: cyw43::Runner<'static, Output<'static, PIN_23>, PioSpi<'static, PIN_25, PIO0, 0, DMA_CH0>>,
+) -> ! {
+    runner.run().await
+}
+
+#[embassy_executor::task]
+async fn net_task(stack: &'static Stack<cyw43::NetDriver<'static>>) -> ! {
+    stack.run().await
+}
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    info!("Hello World!");
+
+    let p = embassy_rp::init(Default::default());
+
+    let fw = include_bytes!("../../../../cyw43-firmware/43439A0.bin");
+    let clm = include_bytes!("../../../../cyw43-firmware/43439A0_clm.bin");
+
+    // To make flashing faster for development, you may want to flash the firmwares independently
+    // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
+    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
+    //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
+
+    let pwr = Output::new(p.PIN_23, Level::Low);
+    let cs = Output::new(p.PIN_25, Level::High);
+    let mut pio = Pio::new(p.PIO0);
+    let spi = PioSpi::new(&mut pio.common, pio.sm0, pio.irq0, cs, p.PIN_24, p.PIN_29, p.DMA_CH0);
+
+    let state = singleton!(cyw43::State::new());
+    let (net_device, mut control, runner) = cyw43::new(state, pwr, spi, fw).await;
+    unwrap!(spawner.spawn(wifi_task(runner)));
+
+    control.init(clm).await;
+    control
+        .set_power_management(cyw43::PowerManagementMode::PowerSave)
+        .await;
+
+    // Use a link-local address for communication without DHCP server
+    let config = Config::Static(embassy_net::StaticConfig {
+        address: embassy_net::Ipv4Cidr::new(embassy_net::Ipv4Address::new(169, 254, 1, 1), 16),
+        dns_servers: heapless::Vec::new(),
+        gateway: None,
+    });
+
+    // Generate random seed
+    let seed = 0x0123_4567_89ab_cdef; // chosen by fair dice roll. guarenteed to be random.
+
+    // Init network stack
+    let stack = &*singleton!(Stack::new(
+        net_device,
+        config,
+        singleton!(StackResources::<2>::new()),
+        seed
+    ));
+
+    unwrap!(spawner.spawn(net_task(stack)));
+
+    //control.start_ap_open("cyw43", 5).await;
+    control.start_ap_wpa2("cyw43", "password", 5).await;
+
+    // And now we can use it!
+
+    let mut rx_buffer = [0; 4096];
+    let mut tx_buffer = [0; 4096];
+    let mut buf = [0; 4096];
+
+    loop {
+        let mut socket = TcpSocket::new(stack, &mut rx_buffer, &mut tx_buffer);
+        socket.set_timeout(Some(Duration::from_secs(10)));
+
+        control.gpio_set(0, false).await;
+        info!("Listening on TCP:1234...");
+        if let Err(e) = socket.accept(1234).await {
+            warn!("accept error: {:?}", e);
+            continue;
+        }
+
+        info!("Received connection from {:?}", socket.remote_endpoint());
+        control.gpio_set(0, true).await;
+
+        loop {
+            let n = match socket.read(&mut buf).await {
+                Ok(0) => {
+                    warn!("read EOF");
+                    break;
+                }
+                Ok(n) => n,
+                Err(e) => {
+                    warn!("read error: {:?}", e);
+                    break;
+                }
+            };
+
+            info!("rxd {}", from_utf8(&buf[..n]).unwrap());
+
+            match socket.write_all(&buf[..n]).await {
+                Ok(()) => {}
+                Err(e) => {
+                    warn!("write error: {:?}", e);
+                    break;
+                }
+            };
+        }
+    }
+}

examples/rp/src/bin/wifi_scan.rs

@@ -0,0 +1,75 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+#![feature(async_fn_in_trait)]
+#![allow(incomplete_features)]
+
+use core::str;
+
+use cyw43_pio::PioSpi;
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_net::Stack;
+use embassy_rp::gpio::{Level, Output};
+use embassy_rp::peripherals::{DMA_CH0, PIN_23, PIN_25, PIO0};
+use embassy_rp::pio::Pio;
+use static_cell::StaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+macro_rules! singleton {
+    ($val:expr) => {{
+        type T = impl Sized;
+        static STATIC_CELL: StaticCell<T> = StaticCell::new();
+        STATIC_CELL.init_with(move || $val)
+    }};
+}
+
+#[embassy_executor::task]
+async fn wifi_task(
+    runner: cyw43::Runner<'static, Output<'static, PIN_23>, PioSpi<'static, PIN_25, PIO0, 0, DMA_CH0>>,
+) -> ! {
+    runner.run().await
+}
+
+#[embassy_executor::task]
+async fn net_task(stack: &'static Stack<cyw43::NetDriver<'static>>) -> ! {
+    stack.run().await
+}
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    info!("Hello World!");
+
+    let p = embassy_rp::init(Default::default());
+
+    let fw = include_bytes!("../../../../cyw43-firmware/43439A0.bin");
+    let clm = include_bytes!("../../../../cyw43-firmware/43439A0_clm.bin");
+
+    // To make flashing faster for development, you may want to flash the firmwares independently
+    // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
+    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
+    //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
+
+    let pwr = Output::new(p.PIN_23, Level::Low);
+    let cs = Output::new(p.PIN_25, Level::High);
+    let mut pio = Pio::new(p.PIO0);
+    let spi = PioSpi::new(&mut pio.common, pio.sm0, pio.irq0, cs, p.PIN_24, p.PIN_29, p.DMA_CH0);
+
+    let state = singleton!(cyw43::State::new());
+    let (_net_device, mut control, runner) = cyw43::new(state, pwr, spi, fw).await;
+    unwrap!(spawner.spawn(wifi_task(runner)));
+
+    control.init(clm).await;
+    control
+        .set_power_management(cyw43::PowerManagementMode::PowerSave)
+        .await;
+
+    let mut scanner = control.scan().await;
+    while let Some(bss) = scanner.next().await {
+        if let Ok(ssid_str) = str::from_utf8(&bss.ssid) {
+            info!("scanned {} == {:x}", ssid_str, bss.bssid);
+        }
+    }
+}

examples/rp/src/bin/wifi_tcp_server.rs

@@ -0,0 +1,146 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+#![feature(async_fn_in_trait)]
+#![allow(incomplete_features)]
+
+use core::str::from_utf8;
+
+use cyw43_pio::PioSpi;
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_net::tcp::TcpSocket;
+use embassy_net::{Config, Stack, StackResources};
+use embassy_rp::gpio::{Level, Output};
+use embassy_rp::peripherals::{DMA_CH0, PIN_23, PIN_25, PIO0};
+use embassy_rp::pio::Pio;
+use embassy_time::Duration;
+use embedded_io::asynch::Write;
+use static_cell::StaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+macro_rules! singleton {
+    ($val:expr) => {{
+        type T = impl Sized;
+        static STATIC_CELL: StaticCell<T> = StaticCell::new();
+        STATIC_CELL.init_with(move || $val)
+    }};
+}
+
+#[embassy_executor::task]
+async fn wifi_task(
+    runner: cyw43::Runner<'static, Output<'static, PIN_23>, PioSpi<'static, PIN_25, PIO0, 0, DMA_CH0>>,
+) -> ! {
+    runner.run().await
+}
+
+#[embassy_executor::task]
+async fn net_task(stack: &'static Stack<cyw43::NetDriver<'static>>) -> ! {
+    stack.run().await
+}
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    info!("Hello World!");
+
+    let p = embassy_rp::init(Default::default());
+
+    let fw = include_bytes!("../../../../cyw43-firmware/43439A0.bin");
+    let clm = include_bytes!("../../../../cyw43-firmware/43439A0_clm.bin");
+
+    // To make flashing faster for development, you may want to flash the firmwares independently
+    // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
+    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
+    //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
+
+    let pwr = Output::new(p.PIN_23, Level::Low);
+    let cs = Output::new(p.PIN_25, Level::High);
+    let mut pio = Pio::new(p.PIO0);
+    let spi = PioSpi::new(&mut pio.common, pio.sm0, pio.irq0, cs, p.PIN_24, p.PIN_29, p.DMA_CH0);
+
+    let state = singleton!(cyw43::State::new());
+    let (net_device, mut control, runner) = cyw43::new(state, pwr, spi, fw).await;
+    unwrap!(spawner.spawn(wifi_task(runner)));
+
+    control.init(clm).await;
+    control
+        .set_power_management(cyw43::PowerManagementMode::PowerSave)
+        .await;
+
+    let config = Config::Dhcp(Default::default());
+    //let config = embassy_net::Config::Static(embassy_net::Config {
+    //    address: Ipv4Cidr::new(Ipv4Address::new(192, 168, 69, 2), 24),
+    //    dns_servers: Vec::new(),
+    //    gateway: Some(Ipv4Address::new(192, 168, 69, 1)),
+    //});
+
+    // Generate random seed
+    let seed = 0x0123_4567_89ab_cdef; // chosen by fair dice roll. guarenteed to be random.
+
+    // Init network stack
+    let stack = &*singleton!(Stack::new(
+        net_device,
+        config,
+        singleton!(StackResources::<2>::new()),
+        seed
+    ));
+
+    unwrap!(spawner.spawn(net_task(stack)));
+
+    loop {
+        //control.join_open(env!("WIFI_NETWORK")).await;
+        match control.join_wpa2(env!("WIFI_NETWORK"), env!("WIFI_PASSWORD")).await {
+            Ok(_) => break,
+            Err(err) => {
+                info!("join failed with status={}", err.status);
+            }
+        }
+    }
+
+    // And now we can use it!
+
+    let mut rx_buffer = [0; 4096];
+    let mut tx_buffer = [0; 4096];
+    let mut buf = [0; 4096];
+
+    loop {
+        let mut socket = TcpSocket::new(stack, &mut rx_buffer, &mut tx_buffer);
+        socket.set_timeout(Some(Duration::from_secs(10)));
+
+        control.gpio_set(0, false).await;
+        info!("Listening on TCP:1234...");
+        if let Err(e) = socket.accept(1234).await {
+            warn!("accept error: {:?}", e);
+            continue;
+        }
+
+        info!("Received connection from {:?}", socket.remote_endpoint());
+        control.gpio_set(0, true).await;
+
+        loop {
+            let n = match socket.read(&mut buf).await {
+                Ok(0) => {
+                    warn!("read EOF");
+                    break;
+                }
+                Ok(n) => n,
+                Err(e) => {
+                    warn!("read error: {:?}", e);
+                    break;
+                }
+            };
+
+            info!("rxd {}", from_utf8(&buf[..n]).unwrap());
+
+            match socket.write_all(&buf[..n]).await {
+                Ok(()) => {}
+                Err(e) => {
+                    warn!("write error: {:?}", e);
+                    break;
+                }
+            };
+        }
+    }
+}