NaxdyOrg/embassy
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

cargo fmt

Browse source
This commit is contained in:
dvdsk 2024-06-08 00:30:52 +02:00
parent 1812ccd276
commit ab31a02e17
No known key found for this signature in database
GPG key ID: 6CF9D20C5709A836
2 changed files with 8 additions and 9 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
embassy-net-wiznet/src/lib.rs
View file

@ -29,7 +29,7 @@ pub type Device<'d> = embassy_net_driver_channel::Device<'d, MTU>;
/// send packet queue. With a the ethernet MTU of _1514_ this takes up `N_RX +
/// NTX * 1514` bytes. While setting these both to 1 is the minimum this might
/// hurt performance as a packet can not be received while processing another.
///
///
/// # Warning
/// On devices with a small amount of ram (think ~64k) watch out with the size
/// of there parameters. They will quickly use too much RAM.

15
examples/stm32f4/src/bin/eth_w5500.rs
View file

@ -5,17 +5,18 @@ use defmt::*;
use embassy_executor::Spawner;
use embassy_net::tcp::TcpSocket;
use embassy_net::{Ipv4Address, Stack, StackResources};
use embassy_net_wiznet::{chip::W5500, Device, Runner, State};
use embassy_stm32::gpio::{Level, Output, Pull, Speed};
use embassy_net_wiznet::chip::W5500;
use embassy_net_wiznet::{Device, Runner, State};
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Level, Output, Pull, Speed};
use embassy_stm32::mode::Async;
use embassy_stm32::rng::Rng;
use embassy_stm32::spi::Spi;
use embassy_stm32::mode::Async;
use embassy_stm32::time::Hertz;
use embassy_stm32::{bind_interrupts, peripherals, rng, spi, Config};
use embassy_time::{Timer, Delay};
use embedded_io_async::Write;
use embassy_time::{Delay, Timer};
use embedded_hal_bus::spi::ExclusiveDevice;
use embedded_io_async::Write;
use static_cell::StaticCell;
use {defmt_rtt as _, panic_probe as _};
@ -25,9 +26,7 @@ bind_interrupts!(struct Irqs {
type EthernetSPI = ExclusiveDevice<Spi<'static, Async>, Output<'static>, Delay>;
#[embassy_executor::task]
async fn ethernet_task(
runner: Runner<'static, W5500, EthernetSPI, ExtiInput<'static>, Output<'static>>,
) -> ! {
async fn ethernet_task(runner: Runner<'static, W5500, EthernetSPI, ExtiInput<'static>, Output<'static>>) -> ! {
runner.run().await
}