stm32/spi: remove DMA generic params.

examples/stm32f4/src/bin/spi.rs

@@ -3,7 +3,6 @@
 
 use cortex_m_rt::entry;
 use defmt::*;
-use embassy_stm32::dma::NoDma;
 use embassy_stm32::gpio::{Level, Output, Speed};
 use embassy_stm32::spi::{Config, Spi};
 use embassy_stm32::time::Hertz;
@@ -18,7 +17,7 @@ fn main() -> ! {
     let mut spi_config = Config::default();
     spi_config.frequency = Hertz(1_000_000);
 
-    let mut spi = Spi::new(p.SPI3, p.PC10, p.PC12, p.PC11, NoDma, NoDma, spi_config);
+    let mut spi = Spi::new_blocking(p.SPI3, p.PC10, p.PC12, p.PC11, spi_config);
 
     let mut cs = Output::new(p.PE0, Level::High, Speed::VeryHigh);
 

examples/stm32f4/src/bin/ws2812_spi.rs

@@ -13,8 +13,8 @@
 #![no_std]
 #![no_main]
 
+use embassy_stm32::spi;
 use embassy_stm32::time::khz;
-use embassy_stm32::{dma, spi};
 use embassy_time::{Duration, Ticker, Timer};
 use {defmt_rtt as _, panic_probe as _};
 
@@ -78,7 +78,7 @@ async fn main(_spawner: embassy_executor::Spawner) {
     spi_config.frequency = khz(12_800);
 
     // Since we only output waveform, then the Rx and Sck and RxDma it is not considered
-    let mut ws2812_spi = spi::Spi::new_txonly_nosck(dp.SPI1, dp.PB5, dp.DMA2_CH3, dma::NoDma, spi_config);
+    let mut ws2812_spi = spi::Spi::new_txonly_nosck(dp.SPI1, dp.PB5, dp.DMA2_CH3, spi_config);
 
     // flip color at 2 Hz
     let mut ticker = Ticker::every(Duration::from_millis(500));

examples/stm32g0/src/bin/spi_neopixel.rs

@@ -4,7 +4,6 @@
 use defmt::*;
 use embassy_executor::Spawner;
 use embassy_stm32::dma::word::U5;
-use embassy_stm32::dma::NoDma;
 use embassy_stm32::spi::{Config, Spi};
 use embassy_stm32::time::Hertz;
 use embassy_time::Timer;
@@ -77,7 +76,7 @@ async fn main(_spawner: Spawner) {
 
     let mut config = Config::default();
     config.frequency = Hertz(4_000_000);
-    let mut spi = Spi::new_txonly_nosck(p.SPI1, p.PB5, p.DMA1_CH3, NoDma, config);
+    let mut spi = Spi::new_txonly_nosck(p.SPI1, p.PB5, p.DMA1_CH3, config);
 
     let mut neopixels = Ws2812::new();
 

examples/stm32h7/src/bin/spi.rs

@@ -7,7 +7,7 @@ use core::str::from_utf8;
 use cortex_m_rt::entry;
 use defmt::*;
 use embassy_executor::Executor;
-use embassy_stm32::dma::NoDma;
+use embassy_stm32::mode::Blocking;
 use embassy_stm32::peripherals::SPI3;
 use embassy_stm32::time::mhz;
 use embassy_stm32::{spi, Config};
@@ -16,7 +16,7 @@ use static_cell::StaticCell;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::task]
-async fn main_task(mut spi: spi::Spi<'static, SPI3, NoDma, NoDma>) {
+async fn main_task(mut spi: spi::Spi<'static, SPI3, Blocking>) {
     for n in 0u32.. {
         let mut write: String<128> = String::new();
         core::write!(&mut write, "Hello DMA World {}!\r\n", n).unwrap();
@@ -62,7 +62,7 @@ fn main() -> ! {
     let mut spi_config = spi::Config::default();
     spi_config.frequency = mhz(1);
 
-    let spi = spi::Spi::new(p.SPI3, p.PB3, p.PB5, p.PB4, NoDma, NoDma, spi_config);
+    let spi = spi::Spi::new_blocking(p.SPI3, p.PB3, p.PB5, p.PB4, spi_config);
 
     let executor = EXECUTOR.init(Executor::new());
 

examples/stm32h7/src/bin/spi_dma.rs

@@ -7,15 +7,15 @@ use core::str::from_utf8;
 use cortex_m_rt::entry;
 use defmt::*;
 use embassy_executor::Executor;
-use embassy_stm32::peripherals::{DMA1_CH3, DMA1_CH4, SPI3};
+use embassy_stm32::mode::Async;
 use embassy_stm32::time::mhz;
-use embassy_stm32::{spi, Config};
+use embassy_stm32::{peripherals, spi, Config};
 use heapless::String;
 use static_cell::StaticCell;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::task]
-async fn main_task(mut spi: spi::Spi<'static, SPI3, DMA1_CH3, DMA1_CH4>) {
+async fn main_task(mut spi: spi::Spi<'static, peripherals::SPI3, Async>) {
     for n in 0u32.. {
         let mut write: String<128> = String::new();
         let mut read = [0; 128];

examples/stm32l0/src/bin/spi.rs

@@ -3,7 +3,6 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::dma::NoDma;
 use embassy_stm32::gpio::{Level, Output, Speed};
 use embassy_stm32::spi::{Config, Spi};
 use embassy_stm32::time::Hertz;
@@ -17,7 +16,7 @@ async fn main(_spawner: Spawner) {
     let mut spi_config = Config::default();
     spi_config.frequency = Hertz(1_000_000);
 
-    let mut spi = Spi::new(p.SPI1, p.PB3, p.PA7, p.PA6, NoDma, NoDma, spi_config);
+    let mut spi = Spi::new_blocking(p.SPI1, p.PB3, p.PA7, p.PA6, spi_config);
 
     let mut cs = Output::new(p.PA15, Level::High, Speed::VeryHigh);
 

examples/stm32l1/src/bin/spi.rs

@@ -3,7 +3,6 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::dma::NoDma;
 use embassy_stm32::gpio::{Level, Output, Speed};
 use embassy_stm32::spi::{Config, Spi};
 use embassy_stm32::time::Hertz;
@@ -17,7 +16,7 @@ async fn main(_spawner: Spawner) {
     let mut spi_config = Config::default();
     spi_config.frequency = Hertz(1_000_000);
 
-    let mut spi = Spi::new(p.SPI1, p.PA5, p.PA7, p.PA6, NoDma, NoDma, spi_config);
+    let mut spi = Spi::new_blocking(p.SPI1, p.PA5, p.PA7, p.PA6, spi_config);
 
     let mut cs = Output::new(p.PA4, Level::High, Speed::VeryHigh);
 

examples/stm32l4/src/bin/spe_adin1110_http_server.rs

@@ -23,18 +23,23 @@ use embassy_futures::select::{select, Either};
 use embassy_futures::yield_now;
 use embassy_net::tcp::TcpSocket;
 use embassy_net::{Ipv4Address, Ipv4Cidr, Stack, StackResources, StaticConfigV4};
+use embassy_net_adin1110::{Device, Runner, ADIN1110};
+use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
+use embassy_stm32::i2c::{self, Config as I2C_Config, I2c};
+use embassy_stm32::mode::Async;
+use embassy_stm32::rng::{self, Rng};
+use embassy_stm32::spi::{Config as SPI_Config, Spi};
+use embassy_stm32::time::Hertz;
+use embassy_stm32::{bind_interrupts, exti, pac, peripherals};
 use embassy_time::{Delay, Duration, Ticker, Timer};
 use embedded_hal_async::i2c::I2c as I2cBus;
+use embedded_hal_bus::spi::ExclusiveDevice;
 use embedded_io::Write as bWrite;
 use embedded_io_async::Write;
-use hal::gpio::{Input, Level, Output, Speed};
-use hal::i2c::{self, I2c};
-use hal::rng::{self, Rng};
-use hal::{bind_interrupts, exti, pac, peripherals};
 use heapless::Vec;
+use panic_probe as _;
 use rand::RngCore;
 use static_cell::StaticCell;
-use {embassy_stm32 as hal, panic_probe as _};
 
 bind_interrupts!(struct Irqs {
     I2C3_EV => i2c::EventInterruptHandler<peripherals::I2C3>;
@@ -42,13 +47,6 @@ bind_interrupts!(struct Irqs {
     RNG => rng::InterruptHandler<peripherals::RNG>;
 });
 
-use embassy_net_adin1110::{Device, Runner, ADIN1110};
-use embedded_hal_bus::spi::ExclusiveDevice;
-use hal::gpio::Pull;
-use hal::i2c::Config as I2C_Config;
-use hal::spi::{Config as SPI_Config, Spi};
-use hal::time::Hertz;
-
 // Basic settings
 // MAC-address used by the adin1110
 const MAC: [u8; 6] = [0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff];
@@ -57,7 +55,7 @@ const IP_ADDRESS: Ipv4Cidr = Ipv4Cidr::new(Ipv4Address([192, 168, 1, 5]), 24);
 // Listen port for the webserver
 const HTTP_LISTEN_PORT: u16 = 80;
 
-pub type SpeSpi = Spi<'static, peripherals::SPI2, peripherals::DMA1_CH1, peripherals::DMA1_CH2>;
+pub type SpeSpi = Spi<'static, peripherals::SPI2, Async>;
 pub type SpeSpiCs = ExclusiveDevice<SpeSpi, Output<'static>, Delay>;
 pub type SpeInt = exti::ExtiInput<'static>;
 pub type SpeRst = Output<'static>;

examples/stm32l4/src/bin/spi.rs

@@ -2,7 +2,6 @@
 #![no_main]
 
 use defmt::*;
-use embassy_stm32::dma::NoDma;
 use embassy_stm32::gpio::{Level, Output, Speed};
 use embassy_stm32::spi::{Config, Spi};
 use embassy_stm32::time::Hertz;
@@ -17,7 +16,7 @@ fn main() -> ! {
     let mut spi_config = Config::default();
     spi_config.frequency = Hertz(1_000_000);
 
-    let mut spi = Spi::new(p.SPI3, p.PC10, p.PC12, p.PC11, NoDma, NoDma, spi_config);
+    let mut spi = Spi::new_blocking(p.SPI3, p.PC10, p.PC12, p.PC11, spi_config);
 
     let mut cs = Output::new(p.PE0, Level::High, Speed::VeryHigh);
 

examples/stm32l4/src/bin/spi_blocking_async.rs

@@ -4,7 +4,6 @@
 use defmt::*;
 use embassy_embedded_hal::adapter::BlockingAsync;
 use embassy_executor::Spawner;
-use embassy_stm32::dma::NoDma;
 use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
 use embassy_stm32::spi::{Config, Spi};
 use embassy_stm32::time::Hertz;
@@ -19,7 +18,7 @@ async fn main(_spawner: Spawner) {
     let mut spi_config = Config::default();
     spi_config.frequency = Hertz(1_000_000);
 
-    let spi = Spi::new(p.SPI3, p.PC10, p.PC12, p.PC11, NoDma, NoDma, spi_config);
+    let spi = Spi::new_blocking(p.SPI3, p.PC10, p.PC12, p.PC11, spi_config);
 
     let mut spi = BlockingAsync::new(spi);