bors[bot]
1bf6e646c9
Merge #465
...
465: Adjust for STM32U5. r=lulf a=bobmcwhirter
Co-authored-by: Bob McWhirter <bmcwhirt@redhat.com>
2021-11-02 20:42:41 +00:00
Bob McWhirter
d1272e00bb
Prefix unused variable for now.
2021-11-02 15:45:56 -04:00
Bob McWhirter
44056c2e75
Less allowy.
2021-11-02 15:32:20 -04:00
Bob McWhirter
076c795ebb
Even more allowed unused.
2021-11-02 15:28:14 -04:00
Bob McWhirter
6bbf450478
Allow unused macros temporarily until U5 supports DMA.
2021-11-02 15:20:42 -04:00
Ulf Lilleengen
205a223af3
Update versions of critical-section and atomic-polyfill
2021-11-02 18:52:03 +01:00
Bob McWhirter
705523d0ea
Fix formatting.
2021-11-02 12:13:42 -04:00
Bob McWhirter
f12b70535b
Adjust for STM32U5.
2021-11-02 12:05:24 -04:00
Bob McWhirter
bbff98ed0d
Move the use inside the macro call, inside another set of braces in case it percolates up twice.
2021-10-26 14:34:03 -04:00
Bob McWhirter
a72816492a
Only attempt to enable the dmamux peri clock if it has an enable bit.
2021-10-26 14:19:03 -04:00
Bob McWhirter
959aecf6ac
Enable the DMAMUX clocks.
2021-10-26 14:01:39 -04:00
Matous Hybl
015cad84dd
Initial support for STM32F767ZI.
2021-10-26 17:33:28 +02:00
bors[bot]
01e5376b25
Merge #456
...
456: Fix L4 clock setup for MSI and PLL to allow RNG operation r=Dirbaio a=lulf
Example is tested on STM32L475VG.
Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
2021-10-26 11:59:14 +00:00
Ulf Lilleengen
e55726964d
Fix clock setup for MSI and PLL to allow RNG opereation
...
Add RNG example using PLL as clock source.
2021-10-26 13:45:53 +02:00
Ulf Lilleengen
f8ebc967a9
Add implementation of async trait for STM32 I2C v2
...
* Add DMA read implementation for I2C v2
* Add example using DMA for I2C
2021-10-21 12:30:02 +02:00
Ulf Lilleengen
d2a79a46c5
Configure the correct pin instances
2021-10-21 11:57:00 +02:00
Tobias Pisani
43a7226d8b
inline FRE register check for SPI on F1
2021-10-11 23:33:32 +02:00
Tobias Pisani
2cbb8a7ece
Add AFType::Input for input configurations.
2021-10-11 22:57:21 +02:00
Tobias Pisani
259e84e68e
Make miso/mosi optional when for unidirectional spi
...
Only suported on v1 currently
2021-10-11 22:57:21 +02:00
Tobias Pisani
c44bed300b
Correctly set alternate function for stm32f1 gpios
2021-10-11 22:57:21 +02:00
Tobias Pisani
091e7e1f98
Generate USART pin definitions for stm32f1
2021-10-11 22:57:21 +02:00
Tobias Pisani
39880de958
partial alternate function configuration on STM32f1
2021-10-11 22:57:10 +02:00
Tobias Pisani
f9a576d13d
feat: Add spi support for STM32F1 variants
2021-10-11 22:39:48 +02:00
Ben Gamari
006bbea51a
stm32/adc: Add IN0 channel
2021-09-29 00:32:40 -04:00
Ben Gamari
5a38cc2140
stm32/dac: Ensure that clock is enabled
2021-09-29 00:32:40 -04:00
Ben Gamari
0b9961584b
stm32/adc: Ensure that clock is enabled
...
Sadly due to the inconsistency in clocking configuration across devices
we cannot use RccPeripheral.
2021-09-29 00:32:40 -04:00
Ben Gamari
573e6ec373
stm32g0: Add support for low-power run
2021-09-28 21:19:10 -04:00
Ben Gamari
794798e225
stm32g0: Add support for HSI divider
2021-09-28 21:19:10 -04:00
Ben Gamari
aa4069fe10
stm32/adc: Fix ADC support for STM32G0
2021-09-28 21:19:10 -04:00
Ben Gamari
e2e0464d04
stm32/adc: Factor out conversion logic
...
Also guard errata workaround correctly.
2021-09-28 18:00:05 -04:00
Mariusz Ryndzionek
ce361abb1b
Changing the casts (code review request)
2021-09-28 18:31:04 +02:00
Mariusz Ryndzionek
bce909ec1e
Initial STM32F1 family support with two examples for STM32F103C8 (Blue Pill)
2021-09-28 18:31:04 +02:00
Joshua Salzedo
ab60cfd64b
Patch additional regressions
2021-09-27 15:48:56 -07:00
Joshua Salzedo
67e2f9159c
set moder::ALTERNATE last when configuring pins to AF modes.
...
- as per STM32F4xx_hal's impl
2021-09-27 15:27:43 -07:00
Joshua Salzedo
07e20a7443
Pub use version-specific CRC symbols, not just the CRC struct.
2021-09-27 11:17:31 -07:00
Joshua Salzedo
a26ffeb84b
Cargo fmt
2021-09-27 10:49:32 -07:00
Joshua Salzedo
e36d4f460a
Fix variable names in crc_v2/v3.
...
removed `reclaim` in crc_v1.
used write instead of modify.
renamed `init` to `reset` in crc_v1.
2021-09-27 10:46:09 -07:00
Joshua Salzedo
43ad28b9f9
Use unborrow for CRC constructor
...
sort feature gates
fix repetition in CRC config names
2021-09-27 10:38:55 -07:00
Joshua Salzedo
7392e33ad5
cargo fmt
2021-09-26 19:20:21 -07:00
Joshua Salzedo
e67af514e9
Fix v2/3 module paths
2021-09-26 19:15:54 -07:00
Joshua Salzedo
642b0825a6
V3 is just an extension of V2, merge modules.
2021-09-26 19:14:08 -07:00
Joshua Salzedo
f9ff5336d4
Merge all of the crc_v2 configurations into a single modify call
2021-09-26 18:46:19 -07:00
Joshua Salzedo
8fac444c4e
Flesh out v2 config writes
2021-09-26 18:39:55 -07:00
Joshua Salzedo
afef19d813
Start work towards CRC_V2
2021-09-26 18:26:20 -07:00
Joshua Salzedo
7899d73359
Expose read so the value can be obtained without a write.
2021-09-26 17:28:58 -07:00
Joshua Salzedo
c892289b2c
Actually export CRC
2021-09-26 17:26:33 -07:00
Joshua Salzedo
24dea91f5a
Fix interface changes
2021-09-26 17:24:48 -07:00
Joshua Salzedo
e18a27eea2
First pass at CRC_V1
2021-09-26 16:46:17 -07:00
Joshua Salzedo
e527892d89
Start work on CRC_v1
2021-09-26 16:29:22 -07:00
Dario Nieuwenhuis
f8d833e0c5
Merge pull request #403 from mryndzionek/af_type
...
Small adjustment to 'set_as_af' interface
2021-09-24 20:20:45 +02:00
Mariusz Ryndzionek
e4b37c40c9
Code review request - moving OutputType to mod sealed
2021-09-24 19:56:48 +02:00
Mariusz Ryndzionek
d371298a27
Small adjustment to 'set_as_af' interface
...
Small adjustment to 'set_as_af' interface - v2
2021-09-24 18:39:07 +02:00
Vincent Stakenburg
7d6d274d55
Add MSI and PLL clock source for L4
2021-09-24 18:27:39 +02:00
Ulf Lilleengen
b6fc19182b
Add pwr for L1 and update RCC to new reg block
2021-09-23 14:51:16 +02:00
Ulf Lilleengen
9d45018077
Refactor V1 SPI
2021-09-21 14:50:23 +02:00
Ulf Lilleengen
c79485c286
Support for STM32L1
...
* Add RCC
* Fix more issues with dash in chip names
* Update stm32-data version
* Add blinky and spi example
2021-09-21 14:50:23 +02:00
Ulf Lilleengen
fb697a2657
Updates
2021-09-15 12:46:20 +02:00
Dario Nieuwenhuis
bb72f7eb98
Merge pull request #390 from lulf/wasm-executor
...
Wasm executor support
2021-09-13 18:55:17 +02:00
Ulf Lilleengen
99a94f1d50
Update version of critical-section
2021-09-13 17:05:17 +02:00
Dario Nieuwenhuis
d6faf69e09
Merge pull request #378 from numero-744/gen-features-using-rust-not-python
...
Use our beloved Rust instead of Python
2021-09-13 16:47:01 +02:00
Ulf Lilleengen
e24528051b
Add WASM support for executor
...
* Adds an executor for WASM runtimes based on wasm_bindgen.
* Add time driver based on JS time handling.
* Add example that can run in browser locally.
* Update to critical-section version that supports 'std' flag
2021-09-13 16:42:39 +02:00
Côme ALLART
99ccf18160
fix(gen-features): keep data files order
2021-09-11 20:04:57 +02:00
Dario Nieuwenhuis
ead987245d
embassy: Refactor module structure to remove kitchen-sink util.
2021-09-11 02:35:35 +02:00
Dario Nieuwenhuis
f2623e7e9b
Update lots of deps
2021-09-11 01:35:23 +02:00
Adam Greig
14fa6c2760
STM32H7: Ethernet: Disable RA in MAC filtering, fix order of MACA0 register writes.
2021-09-06 23:16:43 +01:00
Bob McWhirter
d4bf78a0c1
Don't set SAF=true, do set RA=true for Ethernet.
...
Source-Address-Filtering is not helping the board to receive packets.
For unknown reasons, the Receive-All is required, when in theory
it should not be required. Until we figure it out, follow the
stm32h7xx-hal example of setting RA=true.
2021-09-06 14:21:26 -04:00
Dario Nieuwenhuis
eff8ae9c4d
Merge pull request #381 from lulf/stm32wl55-subghz
...
Add HAL for SubGhz peripheral for STM32 WL series
2021-09-06 00:58:42 +02:00
Dario Nieuwenhuis
de016e8456
Remove trait_alias, allow(incomplete_features).
...
trait_alias seems unused. no idea why it's there.
2021-09-03 17:00:58 +02:00
Ulf Lilleengen
0f3d278ce3
Temporarily comment unused code
2021-09-02 11:31:38 +02:00
Ulf Lilleengen
4dccda085f
Add missing files for G0
2021-09-02 11:19:54 +02:00
Ulf Lilleengen
f175574bcf
Cargo fmt
2021-09-02 10:43:08 +02:00
Ulf Lilleengen
16aa1d1770
ADd missing file
2021-09-02 10:42:11 +02:00
Ulf Lilleengen
7ad6280e65
Add HAL for SubGhz peripheral for STM32 WL series
...
Based on the HAL from stm32wl, the peripheral driver has been
modified to fit into embassy, using the embassy APIs, providing
operation of the radio peripheral.
The initial version does not offer any async APIs, but the example
shows how the radio IRQ can be used to perform async TX of the radio.
2021-09-02 10:39:56 +02:00
Bob McWhirter
37ceae908b
Rename Random impl to Rng.
...
Create Random struct providing next_x(range) for all T:Rng.
2021-09-01 09:39:33 -04:00
Bob McWhirter
7fa3b27cac
Move random utils to another trait.
2021-08-30 09:55:29 -04:00
Bob McWhirter
d525f51940
Add a convenience next(range) to Rng.
2021-08-27 16:10:01 -04:00
Côme ALLART
022b809248
refactor(gen_features): use Rust instead of Python
...
Done for /embassy-stm32 only
The new generator is in /stm32-gen-features
/stm32-metapac could/should be added too
A CI check "generated features up to date" could/should be performed
2021-08-27 11:09:27 +02:00
Dario Nieuwenhuis
e56c6166dc
Merge pull request #373 from embassy-rs/docs
...
Time driver improvements, docs.
2021-08-26 23:37:37 +02:00
Bob McWhirter
dc394dd477
Fixes #374 : Ensure Rng's error is defmt-able.
2021-08-26 14:04:12 -04:00
numero-744
1098072384
build(stm32): remove gen.py build dependency
2021-08-26 18:59:37 +02:00
Dario Nieuwenhuis
7c0990ad1e
time: allow storing state inside the driver struct.
2021-08-25 21:06:27 +02:00
Bob McWhirter
4aa52f1b9e
Formatting.
2021-08-24 14:56:45 -04:00
Bob McWhirter
e36ae76e45
Fix blocking-write for SPI.
2021-08-24 14:44:47 -04:00
Ben Gamari
e2f71ffbbd
Add support for STM32G0
2021-08-20 00:15:11 +02:00
Dario Nieuwenhuis
174c51f097
stm32/metapac: check GPIO RCC regs are always found.
2021-08-19 23:59:50 +02:00
Dario Nieuwenhuis
2c992f7010
stm32: move dbgmcu stuff to toplevel config setting, defaulting to true.
2021-08-19 23:50:19 +02:00
Dario Nieuwenhuis
446d6c275c
stm32: remove last use of python at build time
2021-08-19 23:42:18 +02:00
Dario Nieuwenhuis
9f51f9a170
stm32/wl: add stub APB3 to get it to build.
...
Completely untested.
2021-08-19 22:51:41 +02:00
Dario Nieuwenhuis
637fcdd316
stm32/rcc: update for new version naming
2021-08-19 22:17:45 +02:00
Dario Nieuwenhuis
ec51880e28
stm32/exti: unify all versions into single impl
2021-08-19 22:17:17 +02:00
Dario Nieuwenhuis
d3aeb45fb3
Update cortex-m-rt to v0.7 for stm32, rp.
2021-08-19 00:56:11 +02:00
Timo Kröger
f141b98741
bxcan: Cleanup
...
Older families like F1 and F4 have a consistent naming for the CAN
peripherals: CAN when there is only one instance, CAN1/CAN2/CAN2 if
there are multiple instances.
Newer families like L4 and F7 use the name CAN1 even if there is only
one instance. The number of filter banks is incorrect for those.
Affected chips:
* STM32F722
* STM32F723
* STM32F730
* STM32F732
* STM32F733
* STM32L4P5
* STM32L4Q5
* STM32L4R5
* STM32L4R7
* STM32L4R9
* STM32L4S5
* STM32L4S7
* STM32L4S9
* STM32L431
* STM32L432
* STM32L433
* STM32L442
* STM32L443
* STM32L451
* STM32L452
* STM32L462
* STM32L471
* STM32L475
* STM32L476
* STM32L485
* STM32L486
2021-08-18 21:58:50 +02:00
Timo Kröger
0c3bede64f
bxcan: Make bxcan a hard dependency
...
There seems no way to enable a optional dependency from build.rs or
features passed through the command line.
2021-08-18 21:58:50 +02:00
Timo Kröger
191a589820
bxcan: namechange "bxcan_v1" -> "can_bxcan"
2021-08-18 21:58:50 +02:00
Timo Kröger
dc6b7f3cba
bxcan: Disable on drop
2021-08-18 21:58:50 +02:00
Timo Kröger
7c405250a7
CAN support with bxcan crate
2021-08-18 21:58:50 +02:00
Ulf Lilleengen
4df63f5379
Add per-core EXTI support
...
* Generate a core index put into the PAC for the peripherals to use as
index into registers.
* Add EXTI v2 which uses CORE_INDEX to index exti registers
2021-08-17 16:22:47 +02:00
Ulf Lilleengen
61409e2fb6
Add example for STM32WL55
2021-08-17 16:22:47 +02:00
Bob McWhirter
a93ed2bed6
Add H7 exti button example using correct EXTI reg block offsets.
2021-08-16 15:15:07 -04:00
Ulf Lilleengen
cbff0398bb
Add IRQ-driven buffered USART implementation for STM32 v2 usart ( #356 )
...
* Add IRQ-driven buffered USART implementation for STM32 v2 usart
* Implementation based on nRF UARTE, but simplified to not use DMA to
avoid complex interaction between DMA and USART.
* Implementation of AsyncBufRead and AsyncWrite traits
* Some unit tests to ring buffer
* Update polyfill version
* Update sub module to get usart IRQ fix
2021-08-16 17:16:49 +02:00
Thales Fragoso
c7ae2d2a3a
stm32: Add fences to DMA code
2021-08-10 20:45:41 -03:00
Ben Gamari
40e7176e13
embassy-stm32: Eliminate use of unwrap
2021-08-05 22:40:08 +02:00
Ben Gamari
41aaff95f8
stm32h7: Use unwrap!
2021-08-05 22:39:59 +02:00
Ben Gamari
e44acd0d56
stm32f4: Use unwrap! where possible
2021-08-05 22:39:59 +02:00
Dario Nieuwenhuis
05e50e1f4a
time_driver: use regular fn ptr -> raw ptr casts
2021-08-05 19:19:47 +02:00
Dario Nieuwenhuis
b1d631d639
stm32/time: add Cargo features to choose tim2/tim3
2021-08-05 19:14:09 +02:00
Dario Nieuwenhuis
0ea6a2d890
time: replace dyn clock/alarm with a global Driver trait
2021-08-05 19:14:09 +02:00
Dario Nieuwenhuis
cfa1f61154
Merge pull request #344 from bobmcwhirter/remove_builders
...
Remove builders from Config(s) and examples.
2021-08-04 21:32:39 +02:00
Dario Nieuwenhuis
07d4b196f7
Update nightly, remove removed features.
2021-08-04 19:48:14 +02:00
Dario Nieuwenhuis
9bd34429f3
stm32: add missing + 'a bounds on trait GATs
2021-08-04 19:39:54 +02:00
Bob McWhirter
f4971fbb79
Further work sharing config for example and removing duplicated code.
2021-08-04 13:39:02 -04:00
Bob McWhirter
03f15d3a60
Remove builders from Config(s) and examples.
2021-08-04 11:32:39 -04:00
Dario Nieuwenhuis
de77dc11ca
Merge pull request #301 from thalesfragoso/i2cv2-dma
...
i2c-v2: Implement write_dma and write_dma_vectored
2021-08-04 12:28:18 +02:00
Dario Nieuwenhuis
5d31dd328f
Merge pull request #341 from lulf/usart-dma-read
...
Add uart::Read DMA-based implementation
2021-08-04 11:02:15 +02:00
Ulf Lilleengen
0d02342b2d
Rename bread -> read_blocking
2021-08-04 08:34:30 +02:00
Bob McWhirter
88c11a653c
Formatting fixes.
2021-08-03 14:12:11 -04:00
Bob McWhirter
d7409d63e8
Enhance Rcc configuration to be more fluentish.
...
Clean up H7 examples to remove all vegan HALs and PACs.
2021-08-03 13:57:18 -04:00
Ulf Lilleengen
6ff0614cb6
Add uart::Read DMA-based implementation
...
* Rename existing read() to bread() (blocking)
2021-08-03 15:31:24 +02:00
Dario Nieuwenhuis
3f28bb6c77
common: Initialize PeripheralMutex state with closure to ensure it's done in-place.
2021-08-02 20:13:41 +02:00
Dario Nieuwenhuis
e238079d7d
Make const the states when able.
2021-08-02 19:59:02 +02:00
Dario Nieuwenhuis
63ac7ac799
Mark news as unsafe due to not being leak-safe.
2021-08-02 19:55:04 +02:00
Dario Nieuwenhuis
af87031d62
hal-common: remove Pin in PeripheralMutex
2021-08-02 19:55:04 +02:00
Bob McWhirter
63b32b39e1
Use an em bikeshed instead of an underscore bikeshed.
2021-08-02 13:29:06 -04:00
Bob McWhirter
5f9447abb4
Put the implicit memory.x behind a memory_x feature on embassy-stm32.
2021-08-02 13:21:30 -04:00
Bob McWhirter
3a00a1dba7
Undo the pwr-guarding cfg.
2021-08-02 11:34:41 -04:00
Bob McWhirter
f6c5f039c8
Emit a default memory.x alongside device.x from metapac.
2021-08-02 11:23:55 -04:00
Thales Fragoso
64a3ebd183
i2c-v2: Use new interrupts macro
2021-08-01 19:10:42 -03:00
Thales Fragoso
c1bb83d29d
i2c-v2: Deref interrupt enabling in write_dma_internal
2021-08-01 19:10:42 -03:00
Thales Fragoso
6ddc83029a
i2c-v2: Simplify write_dma
2021-08-01 19:10:42 -03:00
Thales Fragoso
362f7efe99
i2c-v2: Implement write_dma and write_dma_vectored
2021-08-01 19:10:42 -03:00
Dario Nieuwenhuis
3835278567
Merge pull request #321 from thalesfragoso/f4-pll
...
F4 PLL
2021-07-31 11:08:46 +02:00
Thales Fragoso
21e3acaa00
stm32: Use build.rs to generate a more coarse feature
2021-07-31 02:52:26 -03:00
Thales Fragoso
0421c57bd6
F4: Add PWR configuration to PLL
2021-07-29 18:43:15 -03:00
Thales Fragoso
5cfb9adad8
f4-pll: Add max values per chip
2021-07-29 18:43:15 -03:00
Thales Fragoso
e7714983b3
f4-rcc: Add option to enable debug_wfe and add hello example
2021-07-29 18:43:15 -03:00
Thales Fragoso
5abaf8e9d6
Start working on the F4 PLL
2021-07-29 18:43:13 -03:00
Timo Kröger
9342497132
stm32wl55: Use Dbgmcu::enable_all
2021-07-29 17:38:40 +02:00
Timo Kröger
cad43587e6
stm32l0: Use embassy::main for examples
2021-07-29 17:37:32 +02:00
Timo Kröger
2a4890165d
stm32f0: Enable debug access in low power modes
2021-07-29 15:35:23 +02:00
Dario Nieuwenhuis
7bfb763e09
Rename embassy-extras to embassy-hal-common
2021-07-29 13:44:51 +02:00
Dario Nieuwenhuis
c8a48d726a
Merge pull request #277 from Liamolucko/fix-peripheral-ub
...
extras: Fix UB in `Peripheral`
2021-07-29 13:08:30 +02:00
Liam Murphy
d5ba35424d
Replace PeripheralStateUnchecked with register_interrupt_unchecked
2021-07-29 15:11:26 +10:00
Bob McWhirter
8759213fcc
Use new interrupt! table format to /enable/ the IRQs also.
2021-07-27 13:23:33 -04:00
Bob McWhirter
b910551c9a
Generate more rows in the interrupts! table.
...
Adjust DMA/BDMA to use the new style.
2021-07-27 12:52:01 -04:00
Liam Murphy
079526559f
Remove critical sections from PeripheralMutex interrupt handler by checking the interrupt's priority on startup.
...
Since `PeripheralMutex` is the only way to safely maintain state across interrupts, and it no longer allows setting the interrupt's priority, the priority changing isn't a concern.
This also prevents other causes of UB due to the interrupt being exposed during `with`, and allowing enabling the interrupt and setting its context to a bogus pointer.
2021-07-27 17:28:52 +10:00
Timo Kröger
06fb2a7a80
Enable SYSCFG clock in exti::init()
2021-07-24 11:13:49 +02:00
Dario Nieuwenhuis
3c7375c6cd
stm32/bdma: do not clear IF on IRQ handler
2021-07-24 10:01:11 +02:00
Timo Kröger
43c4f24207
STM32 BDMA: Use interrupt flags instead of atomics
2021-07-24 09:26:07 +02:00
Timo Kröger
5a4a5ce334
STM32 DMA: Use interrupt flags instead of atomics
2021-07-24 09:26:07 +02:00
Bob McWhirter
83f63890e5
Actually take a &mut of that read slice.
2021-07-23 13:22:39 -04:00
