52 lines
1.7 KiB
Rust
52 lines
1.7 KiB
Rust
#![no_std]
|
|
#![no_main]
|
|
#![feature(type_alias_impl_trait)]
|
|
|
|
use core::convert::TryFrom;
|
|
|
|
use defmt::*;
|
|
use embassy::executor::Spawner;
|
|
use embassy::time::{Duration, Timer};
|
|
use embassy_stm32::rcc::{
|
|
APBPrescaler, ClockSrc, HSEConfig, HSESrc, PLL48Div, PLLConfig, PLLMainDiv, PLLMul, PLLPreDiv, PLLSrc,
|
|
};
|
|
use embassy_stm32::time::Hertz;
|
|
use embassy_stm32::{Config, Peripherals};
|
|
use {defmt_rtt as _, panic_probe as _};
|
|
|
|
// Example config for maximum performance on a NUCLEO-F207ZG board
|
|
fn config() -> Config {
|
|
let mut config = Config::default();
|
|
// By default, HSE on the board comes from a 8 MHz clock signal (not a crystal)
|
|
config.rcc.hse = Some(HSEConfig {
|
|
frequency: Hertz(8_000_000),
|
|
source: HSESrc::Bypass,
|
|
});
|
|
// PLL uses HSE as the clock source
|
|
config.rcc.pll_mux = PLLSrc::HSE;
|
|
config.rcc.pll = PLLConfig {
|
|
// 8 MHz clock source / 8 = 1 MHz PLL input
|
|
pre_div: unwrap!(PLLPreDiv::try_from(8)),
|
|
// 1 MHz PLL input * 240 = 240 MHz PLL VCO
|
|
mul: unwrap!(PLLMul::try_from(240)),
|
|
// 240 MHz PLL VCO / 2 = 120 MHz main PLL output
|
|
main_div: PLLMainDiv::Div2,
|
|
// 240 MHz PLL VCO / 5 = 48 MHz PLL48 output
|
|
pll48_div: unwrap!(PLL48Div::try_from(5)),
|
|
};
|
|
// System clock comes from PLL (= the 120 MHz main PLL output)
|
|
config.rcc.mux = ClockSrc::PLL;
|
|
// 120 MHz / 4 = 30 MHz APB1 frequency
|
|
config.rcc.apb1_pre = APBPrescaler::Div4;
|
|
// 120 MHz / 2 = 60 MHz APB2 frequency
|
|
config.rcc.apb2_pre = APBPrescaler::Div2;
|
|
config
|
|
}
|
|
|
|
#[embassy::main(config = "config()")]
|
|
async fn main(_spawner: Spawner, _p: Peripherals) {
|
|
loop {
|
|
Timer::after(Duration::from_millis(1000)).await;
|
|
info!("1s elapsed");
|
|
}
|
|
}
|