* audio: Implement a SDL2 backend
This adds support to SDL2 as an audio backend.
It has the same compatibility level as OpenAL without its issues.
I also took the liberty of restructuring the SDL2 code to have one
shared project between audio and input.
The configuration version was also incremented.
* Address gdkchan's comments
* Fix update logic
* Add an heuristic to pick the correct target sample count wanted by the game
* Address gdkchan's comments
* Address Ac_k's comments
* Fix audren output
* Address gdkchan's comments
* gtk3: Add base for future Vulkan integration
This PR puts in place the fondation for the future Vulkan integration on
the GTK3 UI.
This also updated SPB to 0.0.3-build14 that fixed a use after free on
XErrorHandler on Linux.
* Address rip's comments
* Merge GLWidget inside GLRenderer
* Clean up and deduplicate renderer implementations
* Address shahil's comments
* Address Ac_K's comments
* Address gdkchan's comments
* openal: Update to OpenTK 4
* Ryujinx.Graphics.OpenGL: Update to OpenTK 4
* Entirely removed OpenTK 3, still wip
* Use SPB for context creation and handling
Still need to test on GLX and readd input support
* Start implementing a new input system
So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal
Button mapping backend is implemented
TODO: front end, configuration handling and configuration migration
TODO: keyboard support
* Enforce RGB only framebuffer on the GLWidget
Fix possible transparent window
* Implement UI gamepad frontend
Also fix bad mapping of minus button and ensure gamepad config is updated in real time
* Handle controller being disconnected and reconnected again
* Revert "Enforce RGB only framebuffer on the GLWidget"
This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965.
* Fix first color clear
* Filter SDL2 events a bit
* Start working on the keyboard detail
- Rework configuration classes a bit to be more clean.
- Integrate fully the keyboard configuration to the front end (TODO: assigner)
- Start skeleton for the GTK3 keyboard driver
* Add KeyboardStateSnapshot and its integration
* Implement keyboard assigner and GTK3 key mapping
TODO: controller configuration mapping and IGamepad implementation for keyboard
* Add missing SR and SL definitions
* Fix copy pasta mistake on config for previous commit
* Implement IGamepad interface for GTK3 keyboard
* Fix some implementation still being commented in the controller ui for keyboard
* Port screen handle code
* Remove all configuration management code and move HidNew to Hid
* Rename InputConfigNew to InputConfig
* Add a version field to the input config
* Prepare serialization and deserialization of new input config and migrate profile loading and saving
* Support input configuration saving to config and bump config version to 23.
* Clean up in ConfigurationState
* Reference SPB via a nuget package
* Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2
* move GTK3 input to the right directory
* Fix triggers on SDL2
* Update to SDL2 2.0.14 via our own fork
* Update buttons definition for SDL2 2.0.14 and report gamepad features
* Implement motion support again with SDL2
TODO: cemu hooks integration
* Switch to latest of nightly SDL2
* SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index
* Ensure values are set in UI when the gamepad get hot plugged
* Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids
This fixes permanent rumble of pro controller in some hotplug scenario
* Fix more UI bugs
* Move legcay motion code around before reintegration
* gamecontroller UI tweaks here and there
* Hide Motion on non motion configurations
* Update the TODO grave
Some TODO were fixed long time ago or are quite oudated...
* Integrate cemu hooks motion configuration
* Integrate cemu hooks configuration options to the UI again
* cemuhooks => cemuhooks
* Add cemu hook support again
* Fix regression on normal motion and fix some very nasty bugs around
* Fix for XCB multithreads issue on Linux
* Enable motion by default
* Block inputs in the main view when in the controller configuration window
* Some fixes for the controller ui again
* Add joycon support and fixes other hints
* Bug fixes and clean up
- Invert default mapping if not a Nintendo controller
- Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment)
- Clean up hints in use
- Remove debug logs around
- Fixes potential double free with SDL2Gamepad
* Move the button assigner and motion logic to the Ryujinx.Input project
* Reimplement raw keyboard hle input
Also move out the logic of the hotkeys
* Move all remaining Input manager stuffs to the Ryujinx.Input project
* Increment configuration version yet again because of master changes
* Ensure input config isn't null when not present
* Fixes for VS not being nice
* Fix broken gamepad caching logic causing crashes on ui
* Ensure the background context is destroyed
* Update dependencies
* Readd retrocompat with old format of the config to avoid parsing and crashes on those versions
Also updated the debug Config.json
* Document new input APIs
* Isolate SDL2Driver to the project and remove external export of it
* Add support for external gamepad db mappings on SDL2
* Last clean up before PR
* Addresses first part of comments
* Address gdkchan's comments
* Do not use JsonException
* Last comment fixes
* account: Adds Account Manager
In a way to have Custom User Profiles merged in master faster, this PR adds a `AccountManager` class (based on `AccountUtils` class) and the following changes have been made:
- Adds a "default profile values" which were the old hardcoded ones.
- The image profile is moved to the Account service folder.
- The hardcoded UserId for the savedata is now using the `AccountManager` last opened one.
- The DeviceId in Mii service is changed to the right value (checked by REd sys:set call).
* Fix csproj
* Addresses gdkchan's comments
* Fix UserProfile fields
* Fix mii GetDeviceId()
* Update Ryujinx.HLE.csproj
Signal and setup events correctly
Eliminate possible races
Use a single event
Mark volatiles and reduce scope of waithandles
Common handler
100ms -> 50ms
* Minor wording fixes
* Exit dialogue.
* Update MainWindow.cs
* Update DlcWindow.cs
* I found an actual typo for once.
* There we go.
* Fix
* Update MainWindow.cs
* MainWindow is done
* Update ControllerWindow.cs
* Haydn: Part 1
Based on my reverse of audio 11.0.0.
As always, core implementation under LGPLv3 for the same reasons as for Amadeus.
This place the bases of a more flexible audio system while making audout & audin accurate.
This have the following improvements:
- Complete reimplementation of audout and audin.
- Audin currently only have a dummy backend.
- Dramatically reduce CPU usage by up to 50% in common cases (SoundIO and OpenAL).
- Audio Renderer now can output to 5.1 devices when supported.
- Audio Renderer init its backend on demand instead of keeping two up all the time.
- All backends implementation are now in their own project.
- Ryujinx.Audio.Renderer was renamed Ryujinx.Audio and was refactored because of this.
As a note, games having issues with OpenAL haven't improved and will not
because of OpenAL design (stopping when buffers finish playing causing
possible audio "pops" when buffers are very small).
* Update for latest hexkyz's edits on Switchbrew
* audren: Rollback channel configuration changes
* Address gdkchan's comments
* Fix typo in OpenAL backend driver
* Address last comments
* Fix a nit
* Address gdkchan's comments
* Make Windows DPI aware to display properly on high-resolution screens.
* remove empty line
* Don't use app manifest, set process dpi aware programatically.
Store variables in Program.cs for use instead of re-creating them per class/ method.
* Fix for linux/osx
* Add braces
* Re-use manifest. It appears to be required on linux.
* Undo previous commit -- it appears linux was simply never affected.
* Addressed AcK's comments
* Remove unused usings
* Address comments by AcK #2
* Re-order
* Move FromHwnd call to ForceDpiAware class. Wrap in Try-Catch to prevent crashes on systems that don't support it.
* Additional code cleanup
* Remove "global::" reference.
- Bind toggle events after setting up their current values. This fixes the issue where the config is saved 10 times when the main window is opened 😬
- Write to disk immediately to decrease the chances of corruption
* Initial Setup: Reload keys before verifying firmware
Also, display the NoKeys dialog if keyset is empty when verifying
firmware.
* LoadApplications: Remove the lone debug log and print the error directly
Fixes the crashes on linux when you stop emulation, and when you try to
exit the emulator while a game is running.
Also tested on windows without problems on my side.
* gui: Refactoring Part 1
* Fix ProfileDialog.glade path
* Fix Application.Quit assert
* Fix TitleUpdateWindow parent
* Fix TitleUpdate selected item
* Remove extra line in TitleUpdateWindow
* Fix empty assign of Enum.TryParse
* Add Patrons list in the About Window
* update about error messages
* am/gui: Implement Wake-up message.
This implement the ability to send a Wake-up (Resume) message to the guest.
Sometime games needs to Sleep and Wake-up the switch to unlock some ingame features.
* Address gdkchan feedback
* gui: Toggle between docked/handheld mode by clicking status bar
This PR just add a way to toggle between the docked and the handheld mode by clicking the lable in the status bar.
Nothing more.
* Fix glade file formatting
* Add VSync toggle
* shader cache: Fix Linux boot issues
This rollback the init logic back to previous state, and replicate the
way PTC handle initialization.
* shader cache: set default state of ready for translation event to false
* Fix cpu unit tests
Here come Salieri, my implementation of a disk shader cache!
"I'm sure you know why I named it that."
"It doesn't really mean anything."
This implementation collects shaders at runtime and cache them to be later compiled when starting a game.
* Replace Host FPS with FIFO%
* Change measurement order. Improve calculation.
Now at 100% when FIFO is blocking game exectution, rather than "0".
* Address feedback (1)
* Remove Host FPS
* FIFO rather than Fifo
* Address Ac_k feedback
* Rebase
* hos/gui: Add a check of NCA program index in titleid
This add a check to `ApplicationLoader` for the last 2 digits of the game TitleId who seems to be the NCA program index.
We currently return the last index, instead of the lower one.
Same check is added to ApplicationLibrary in the UI.
I've cleaned up both file too.
* hle: implement partial relaunch logic
TODO: make the emulator auto relauch.
* Handle auto relaunch
* hle: Unify update usage system
* hle: Implement support of multi programs in update system
* Add some documentation
* Address rip's comment
Co-authored-by: Ac_K <Acoustik666@gmail.com>
This update the "No keys" dialog and block starting NSP/XCI/NCA without firmware.
Also propose to the user if they want to install firmware if they start an untrimmed XCI and remove KEYS.md as it was completely outdated.
PS: Also fix a bug with "&" in URL with OpenUrl on Windows.
This project wasn't really used by anyone and isn't worth mantaining.
This commit remove the profiler entirely from Ryujinx and remove the associated CI tasks.
* Allow launching with custom data directories
Don't load alternate keys when using custom directory
* Address gdkchan's comments
* Misc fixes to log levels
Added more enabled log levels by default
Moved successful config updation to Notice as
1. It's not a warning
2. Warnings could've been disabled by the config load and hence message
would be lost
* Initial commit
Enable proper LED patterns
Toggle Hotkeys only on focus
Ignore Handheld on Docked mode
Remove PrimaryController
Validate NpadIdType
Rewrite NpadDevices to process config in update loop
Cleanup
* Notify in log periodically when no matched controllers
* Remove duplicate StructArrayHelpers in favor of Common.Memory
Fix struct padding CS0169 warns in Touchscreen
* Remove GTK markup from Controller Applet
Use IList instead of List
Explicit list capacity in 1ms loop
Fix formatting
* Restrict ControllerWindow to show valid controller types
Add selected player name to ControllerWindow title
* ControllerWindow: Fix controller type initial value
NpadDevices: Simplify default battery charge
* Address AcK's comments
Use explicit types and fix formatting
* Remove HashSet for SupportedPlayers
Fixes potential exceptions due to race
* Fix ControllerSupportArg struct packing
Also comes with two revisions of struct for 4/8 players max.
* Amadeus: Final Act
This is my requiem, I present to you Amadeus, a complete reimplementation of the Audio Renderer!
This reimplementation is based on my reversing of every version of the audio system module that I carried for the past 10 months.
This supports every revision (at the time of writing REV1 to REV8 included) and all features proposed by the Audio Renderer on real hardware.
Because this component could be used outside an emulation context, and to avoid possible "inspirations" not crediting the project, I decided to license the Ryujinx.Audio.Renderer project under LGPLv3.
- FE3H voices in videos and chapter intro are not present.
- Games that use two audio renderer **at the same time** are probably going to have issues right now **until we rewrite the audio output interface** (Crash Team Racing is the only known game to use two renderer at the same time).
- Persona 5 Scrambler now goes ingame but audio is garbage. This is caused by the fact that the game engine is syncing audio and video in a really aggressive way. This will disappears the day this game run at full speed.
* Make timing more precise when sleeping on Windows
Improve precision to a 1ms resolution on Windows NT based OS.
This is used to avoid having totally erratic timings and unify all
Windows users to the same resolution.
NOTE: This is only active when emulation is running.
* Logger class changes only
Now compile-time checking is possible with the help of Nullable Value
types.
* Misc formatting
* Manual optimizations
PrintGuestLog
PrintGuestStackTrace
Surfaceflinger DequeueBuffer
* Reduce SendVibrationXX log level to Debug
* Add Notice log level
This level is always enabled and used to print system info, etc...
Also, rewrite LogColor to switch expression as colors are static
* Unify unhandled exception event handlers
* Print enabled LogLevels during init
* Re-add App Exit disposes in proper order
nit: switch case spacing
* Revert PrintGuestStackTrace to Info logs due to #1407
PrintGuestStackTrace is now called in some critical error handlers
so revert to old behavior as KThread isn't part of Guest.
* Batch replace Logger statements
* Implement SwKbd GUI
* Relocate UI handler to Emu Context from Config
Also create a common interface for UI handlers in the context and specialize for Gtk
Add basic input length validation in InputDialog
* Add Transfer Memory support to AppletCreator
Read Initial Text for SwKbd using Transfer Memory
* Improve InputDialog widget
Improve length validation
Has extra label to show validition info
Handle potential errors and log them
* Misc improvements
* Improve string validation
* Improve error handling
* Remove tuple in struct
* Address formatting nits
* Add proper Cancel functionality
Also handle GUI errors in UI handler
* Address jD's comments
* Fix _uiHandler init
* Address AcK's comments
* Initial implementation of Render Target Scaling
Works with most games I have. No GUI option right now, it is hardcoded.
Missing handling for texelFetch operation.
* Realtime Configuration, refactoring.
* texelFetch scaling on fragment shader (WIP)
* Improve Shader-Side changes.
* Fix potential crash when no color/depth bound
* Workaround random uses of textures in compute.
This was blacklisting textures in a few games despite causing no bugs. Will eventually add full support so this doesn't break anything.
* Fix scales oscillating when changing between non-native scales.
* Scaled textures on compute, cleanup, lazier uniform update.
* Cleanup.
* Fix stupidity
* Address Thog Feedback.
* Cover most of GDK's feedback (two comments remain)
* Fix bad rename
* Move IsDepthStencil to FormatExtensions, add docs.
* Fix default config, square texture detection.
* Three final fixes:
- Nearest copy when texture is integer format.
- Texture2D -> Texture3D copy correctly blacklists the texture before trying an unscaled copy (caused driver error)
- Discount small textures.
* Remove scale threshold.
Not needed right now - we'll see if we run into problems.
* All CPU modification blacklists scale.
* Fix comment.
* Implement audio backend configuration option
* Use OpenAL by default
* Increment version number in config.json
and add 30px to the height of the settings window
* nits
* capitalise audio backend names
