rjx-mirror/Ryujinx/Ui/GLRenderer.cs

138 lines
4.2 KiB
C#
Raw Normal View History

Add a Multithreading layer for the GAL, multi-thread shader compilation at runtime (#2501) * Initial Implementation About as fast as nvidia GL multithreading, can be improved with faster command queuing. * Struct based command list Speeds up a bit. Still a lot of time lost to resource copy. * Do shader init while the render thread is active. * Introduce circular span pool V1 Ideally should be able to use structs instead of references for storing these spans on commands. Will try that next. * Refactor SpanRef some more Use a struct to represent SpanRef, rather than a reference. * Flush buffers on background thread * Use a span for UpdateRenderScale. Much faster than copying the array. * Calculate command size using reflection * WIP parallel shaders * Some minor optimisation * Only 2 max refs per command now. The command with 3 refs is gone. :relieved: * Don't cast on the GPU side * Remove redundant casts, force sync on window present * Fix Shader Cache * Fix host shader save. * Fixup to work with new renderer stuff * Make command Run static, use array of delegates as lookup Profile says this takes less time than the previous way. * Bring up to date * Add settings toggle. Fix Muiltithreading Off mode. * Fix warning. * Release tracking lock for flushes * Fix Conditional Render fast path with threaded gal * Make handle iteration safe when releasing the lock This is mostly temporary. * Attempt to set backend threading on driver Only really works on nvidia before launching a game. * Fix race condition with BufferModifiedRangeList, exceptions in tracking actions * Update buffer set commands * Some cleanup * Only use stutter workaround when using opengl renderer non-threaded * Add host-conditional reservation of counter events There has always been the possibility that conditional rendering could use a query object just as it is disposed by the counter queue. This change makes it so that when the host decides to use host conditional rendering, the query object is reserved so that it cannot be deleted. Counter events can optionally start reserved, as the threaded implementation can reserve them before the backend creates them, and there would otherwise be a short amount of time where the counter queue could dispose the event before a call to reserve it could be made. * Address Feedback * Make counter flush tracked again. Hopefully does not cause any issues this time. * Wait for FlushTo on the main queue thread. Currently assumes only one thread will want to FlushTo (in this case, the GPU thread) * Add SDL2 headless integration * Add HLE macro commands. Co-authored-by: Mary <mary@mary.zone>
2021-08-26 22:31:29 +00:00
using Gdk;
using Gtk;
using OpenTK.Graphics.OpenGL;
using Ryujinx.Common.Configuration;
using Ryujinx.Graphics.OpenGL;
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
using Ryujinx.Input.HLE;
using SPB.Graphics;
using SPB.Graphics.OpenGL;
using SPB.Platform;
using SPB.Platform.GLX;
using SPB.Platform.WGL;
using SPB.Windowing;
using System;
using System.Runtime.InteropServices;
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
namespace Ryujinx.Ui
{
public class GlRenderer : RendererWidgetBase
{
private GraphicsDebugLevel _glLogLevel;
private bool _initializedOpenGL;
private OpenGLContextBase _openGLContext;
private SwappableNativeWindowBase _nativeWindow;
public GlRenderer(InputManager inputManager, GraphicsDebugLevel glLogLevel) : base(inputManager, glLogLevel)
{
_glLogLevel = glLogLevel;
}
protected override bool OnDrawn(Cairo.Context cr)
{
if (!_initializedOpenGL)
{
IntializeOpenGL();
}
return true;
}
private void IntializeOpenGL()
{
_nativeWindow = RetrieveNativeWindow();
Window.EnsureNative();
_openGLContext = PlatformHelper.CreateOpenGLContext(GetGraphicsMode(), 3, 3, _glLogLevel == GraphicsDebugLevel.None ? OpenGLContextFlags.Compat : OpenGLContextFlags.Compat | OpenGLContextFlags.Debug);
_openGLContext.Initialize(_nativeWindow);
_openGLContext.MakeCurrent(_nativeWindow);
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
// Release the GL exclusivity that SPB gave us as we aren't going to use it in GTK Thread.
_openGLContext.MakeCurrent(null);
WaitEvent.Set();
_initializedOpenGL = true;
}
private SwappableNativeWindowBase RetrieveNativeWindow()
{
if (OperatingSystem.IsWindows())
{
IntPtr windowHandle = gdk_win32_window_get_handle(Window.Handle);
return new WGLWindow(new NativeHandle(windowHandle));
}
else if (OperatingSystem.IsLinux())
{
IntPtr displayHandle = gdk_x11_display_get_xdisplay(Display.Handle);
IntPtr windowHandle = gdk_x11_window_get_xid(Window.Handle);
return new GLXWindow(new NativeHandle(displayHandle), new NativeHandle(windowHandle));
}
throw new NotImplementedException();
}
[DllImport("libgdk-3-0.dll")]
private static extern IntPtr gdk_win32_window_get_handle(IntPtr d);
[DllImport("libgdk-3.so.0")]
private static extern IntPtr gdk_x11_display_get_xdisplay(IntPtr gdkDisplay);
[DllImport("libgdk-3.so.0")]
private static extern IntPtr gdk_x11_window_get_xid(IntPtr gdkWindow);
private static FramebufferFormat GetGraphicsMode()
{
return Environment.OSVersion.Platform == PlatformID.Unix ? new FramebufferFormat(new ColorFormat(8, 8, 8, 0), 16, 0, ColorFormat.Zero, 0, 2, false) : FramebufferFormat.Default;
}
public override void InitializeRenderer()
{
// First take exclusivity on the OpenGL context.
((Renderer)Renderer).InitializeBackgroundContext(SPBOpenGLContext.CreateBackgroundContext(_openGLContext));
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
_openGLContext.MakeCurrent(_nativeWindow);
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
GL.ClearColor(0, 0, 0, 1.0f);
GL.Clear(ClearBufferMask.ColorBufferBit);
SwapBuffers();
}
public override void SwapBuffers()
{
_nativeWindow.SwapBuffers();
}
public override string GetGpuVendorName()
{
return ((Renderer)Renderer).GpuVendor;
}
protected override void Dispose(bool disposing)
{
// Try to bind the OpenGL context before calling the shutdown event
try
{
_openGLContext?.MakeCurrent(_nativeWindow);
}
catch (Exception) { }
Device.DisposeGpu();
NpadManager.Dispose();
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
// Unbind context and destroy everything
try
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
{
_openGLContext?.MakeCurrent(null);
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
}
catch (Exception) { }
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
_openGLContext.Dispose();
Miria: The Death of OpenTK 3 (#2194) * openal: Update to OpenTK 4 * Ryujinx.Graphics.OpenGL: Update to OpenTK 4 * Entirely removed OpenTK 3, still wip * Use SPB for context creation and handling Still need to test on GLX and readd input support * Start implementing a new input system So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal Button mapping backend is implemented TODO: front end, configuration handling and configuration migration TODO: keyboard support * Enforce RGB only framebuffer on the GLWidget Fix possible transparent window * Implement UI gamepad frontend Also fix bad mapping of minus button and ensure gamepad config is updated in real time * Handle controller being disconnected and reconnected again * Revert "Enforce RGB only framebuffer on the GLWidget" This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965. * Fix first color clear * Filter SDL2 events a bit * Start working on the keyboard detail - Rework configuration classes a bit to be more clean. - Integrate fully the keyboard configuration to the front end (TODO: assigner) - Start skeleton for the GTK3 keyboard driver * Add KeyboardStateSnapshot and its integration * Implement keyboard assigner and GTK3 key mapping TODO: controller configuration mapping and IGamepad implementation for keyboard * Add missing SR and SL definitions * Fix copy pasta mistake on config for previous commit * Implement IGamepad interface for GTK3 keyboard * Fix some implementation still being commented in the controller ui for keyboard * Port screen handle code * Remove all configuration management code and move HidNew to Hid * Rename InputConfigNew to InputConfig * Add a version field to the input config * Prepare serialization and deserialization of new input config and migrate profile loading and saving * Support input configuration saving to config and bump config version to 23. * Clean up in ConfigurationState * Reference SPB via a nuget package * Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2 * move GTK3 input to the right directory * Fix triggers on SDL2 * Update to SDL2 2.0.14 via our own fork * Update buttons definition for SDL2 2.0.14 and report gamepad features * Implement motion support again with SDL2 TODO: cemu hooks integration * Switch to latest of nightly SDL2 * SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index * Ensure values are set in UI when the gamepad get hot plugged * Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids This fixes permanent rumble of pro controller in some hotplug scenario * Fix more UI bugs * Move legcay motion code around before reintegration * gamecontroller UI tweaks here and there * Hide Motion on non motion configurations * Update the TODO grave Some TODO were fixed long time ago or are quite oudated... * Integrate cemu hooks motion configuration * Integrate cemu hooks configuration options to the UI again * cemuhooks => cemuhooks * Add cemu hook support again * Fix regression on normal motion and fix some very nasty bugs around * Fix for XCB multithreads issue on Linux * Enable motion by default * Block inputs in the main view when in the controller configuration window * Some fixes for the controller ui again * Add joycon support and fixes other hints * Bug fixes and clean up - Invert default mapping if not a Nintendo controller - Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment) - Clean up hints in use - Remove debug logs around - Fixes potential double free with SDL2Gamepad * Move the button assigner and motion logic to the Ryujinx.Input project * Reimplement raw keyboard hle input Also move out the logic of the hotkeys * Move all remaining Input manager stuffs to the Ryujinx.Input project * Increment configuration version yet again because of master changes * Ensure input config isn't null when not present * Fixes for VS not being nice * Fix broken gamepad caching logic causing crashes on ui * Ensure the background context is destroyed * Update dependencies * Readd retrocompat with old format of the config to avoid parsing and crashes on those versions Also updated the debug Config.json * Document new input APIs * Isolate SDL2Driver to the project and remove external export of it * Add support for external gamepad db mappings on SDL2 * Last clean up before PR * Addresses first part of comments * Address gdkchan's comments * Do not use JsonException * Last comment fixes
2021-04-14 10:28:43 +00:00
}
}
}