Ultimate Training Modpack Plugin

A Skyline plugin using cargo-skyline for adding features to the training mode. It interfaces with skyline-web to provide a menu for customizing training options.

The latest stable release can be found here.

The latest beta release can be found here.

• Features

• Installation

• Frequently Asked Questions

• Build Instructions

Features

The features in this modpack are configured through the menu, which can be accessed within training mode by pressing SPECIAL+UPTAUNT. Generally they fall into these categories:

• Enables or disables stage hazards
• Saves and loads the positional state of the player and CPU
• Displays additional information onscreen
• Controls CPU behavior

Stage Hazards

Set stage hazards on or off in Training Mode! Use this to practice on tournament legal stages with hazards.

Save States

At any time in Training Mode, you can press Grab + Down Taunt to save the state of training mode. This will save the position, state, and damage of each fighter, which can then be reverted to at any time with Grab + Up Taunt. With the mirroring setting,loading the save state will flip the positions, allowing you to practice your skills facing both directions. Use this instead of the built-in training mode reset!

Input Delay

Practice with emulated extra input delay, in frames. Use this to practice with online's default delay.

Frame Advantage

Practice moves on shield to find out the frame advantage of the moves performed. Best used with Infinite Shield. Can also be used to find the advantage on hit to determine appropriate followups.

Hitbox Visualization

Currently, hitboxes and grabboxes are supported. When visualization is active, other move effects are temporarily turned off for easier visualization.

CPU Behavior

The CPU can be instructed to perform a wide array of different actions in response to particular situations. The following situations are available:

• Mash: To be performed after being hit or shielding an attack
• Followup: To be performed as soon as possible after the mash option
• Ledge: To be performed when hanging on the ledge
• Tech: To be performed when slammed into the ground or wall
• Miss Tech: To be performed after failing to tech
• Defensive: To be performed after the ledge, tech, or miss tech option

The timing of the CPU option can be influenced by the following settings:

• Aerial Delay
• Ledge Delay
• OoS Offset
• Reaction Time
• Fast Fall Delay
• Falling Aerials
• Mash in Neutral

---

Menu Settings

When multiple options are selected, one of the selected options will be chosen at random. Open / focused menus can be reset by pressing the X button. All menus can be reset to the default by pressing the L button.

Feature	Description	Options
Mash Toggles	Actions to be performed as soon as possible out of hitstun or shieldstun	Airdodge, jump, shield, spotdodge, roll in, roll out, aerials, jab, tilts, smash attacks, grab, dash, dash attack
Followup Toggles	Actions to be performed after the Mash option	Airdodge, jump, shield, spotdodge, roll in, roll out, aerials, jab, tilts, smash attacks, grab, dash, dash attack
Attack Angles	For attacks that can be angled, such as some forward tilts	Neutral, up, down
Ledge Options	Actions to be taken when on the ledge	Neutral getup, ledge roll, ledge attack, wait
Ledge Delay	How many frames to delay the ledge option	0 to 300 frames (5 seconds) in increments of 10 frames
Tech Options	Actions to take when slammed into a hard surface	Miss tech, tech in place, tech roll in, tech roll out
Miss Tech Options	Actions to take after missing a tech	Neutral getup, getup attack, roll in, roll out
Defensive Options	Actions to take after a ledge option, tech option, or miss tech option	Spotdodge, roll in, roll out, jab, shield
Aerial Delay	How long to delay a Mash aerial attack	0 to 30 frames (0.5 seconds)
OoS Offset	How many times the CPU shield can be hit before performing a Mash option	0 to 30 hits
Reaction Time	How many frames to delay before performing an option out of shield	0 to 30 frames (0.5 seconds)
Fast Fall	Should the CPU fastfall during a jump	Yes, No
Fast Fall Delay	How many frames the CPU should delay their fastfall	0 to 30 frames (0.5 seconds)
Falling Aerials	Should aerials be performed when rising or when falling	Yes, No
Full Hop	Should the CPU perform a full hop or a short hop	Yes, No
Shield Tilt	Direction to tilt the shield	Neutral, out, up-out, up, up-in, in, down-in, down, down-out, left, right
DI Direction	Direction to angle the directional influence during hitlag	Neutral, out, up-out, up, up-in, in, down-in, down, down-out, left, right
SDI Direction	Direction to angle the smash directional influence during hitlag	Neutral, out, up-out, up, up-in, in, down-in, down, down-out, left, right
Airdodge Direction	Direction to angle airdodges	Neutral, out, up-out, up, up-in, in, down-in, down, down-out, left, right
SDI Strength	Relative strength of the smash directional influence inputs	Normal (8 frames between SDI inputs), Medium (6 frames), High (4 frames)
Shield Toggles	CPU Shield Behavior	None, Infinite (no shield damage or decay), Hold (no shield decay until the shield is hit for the first time), Constant (no shield decay)
Mirroring	Flips save states in the left-right direction across the stage center	None, Alternate, Random
Input Delay	Frames to delay player inputs by	0 to 10 frames (0.167 seconds)
Save Damage	Should save states retain player/CPU damage	Yes, No
Hitbox Visualization	Should hitboxes be displayed, hiding other visual effects	Yes, No
Stage Hazards	Should stage hazards be present	Yes, No
Frame Advantage	Display the time difference between when the player is actionable and the CPU is actionable	Yes, No
Mash in Neutral	Should Mash options be performed repeatedly or only when the CPU is hit	Yes, No

Installation

To install the training modpack, download the .zip file from the latest release page. Extract the files from the .zip file using the file explorer on Windows or Mac, or a program such as 7-zip (windows) or unzip (Linux). Then transfer the extracted contents onto the root of your SD card, merging the /atmosphere folder with the one on your SD card. No files need to be deleted when upgrading from a previous version. The SD card should have the below files at these locations.

SD Card Root
└── atmosphere
    └── contents
        └── 01006A800016E000
            ├── exefs
            │   ├── main.npdm
            │   └── subsdk9
            ├── manual_html
            │   └── html-document
            │       └── contents.htdocs
            │           ├── aerial_delay.svg
            │           ├── air_dodge_dir.svg
            │           ├── attack_angle.svg
            │           ├── check.svg
            │           ├── defensive_state.svg
            │           ├── di_state.svg
            │           ├── falling_aerials.svg
            │           ├── fast_fall.svg
            │           ├── fast_fall_delay.svg
            │           ├── follow_up.svg
            │           ├── frame_advantage.svg
            │           ├── full_hop.svg
            │           ├── input_delay.svg
            │           ├── ledge_delay.svg
            │           ├── ledge_state.svg
            │           ├── mash_in_neutral.svg
            │           ├── mash_state.svg
            │           ├── miss_tech_state.svg
            │           ├── oos_offset.svg
            │           ├── reaction_time.svg
            │           ├── save_damage.svg
            │           ├── save_state_mirroring.svg
            │           ├── sdi_state.svg
            │           ├── sdi_strength.svg
            │           ├── shield_state.svg
            │           ├── shield_tilt.svg
            │           ├── stage_hazards.svg
            │           └── tech_state.svg
            └── romfs
                └── skyline
                    └── plugins
                        ├── libnn_hid_hook.nro
                        ├── libnro_hook.nro
                        ├── libparam_hook.nro
                        └── libtraining_modpack.nro

To install a beta version of the modpack, follow the same procedure using the latest beta release on Github. Beta releases may have additional features and bugfixes, but are subject to change.

Frequently Asked Questions

• Can my Switch run the Training Modpack?
  • Your switch has to be hackable, which means it needs to be an early enough unit. You can check at https://ismyswitchpatched.com/ .
• Is this mod wifi-safe?
  • Yes*. Smash online is client sided. What this means is when playing against an opponent, their instance of the game is separate from your instance of the game, and when the server sends over data from the other player, it is replicated on your screen. Desyncs arise from when properties from the other side differ from what your game expects. (For example, Mario’s Forward Smash dealing 95% instead of its’ normal amount of damage). Because Training Modpack is only available while using Training Mode, the training modpack is safe to use while using online games. However, you should recognize that mods are not sanctioned by Nintendo and that there is always some ban risk associated with using them. Use this mod and others at your own risk.
• Is this mod compatible with Yuzu or other emulators?
  • No, emulators do not support Skyline yet, which is the code framework this mod works under. However, if those emulators add Skyline support at some point in the future, then it may be possible for the training modpack to run on those platforms.
• Can I change the button combination to bring up the menu?
  • No, this is not currently supported. Use SPECIAL+UPTAUNT to open the menu.
• How do I fix the error message "The software has been closed due to an error" when starting Smash?
  • If you're on a Mac, check your SD card for files with dots at the beginning of them in the training mod files, they should be deleted (like, ._libtraining_modpack.nro in addition to libtraining_modpack.nro).
• How do I fix the error message "Fatal error: Failed to stat stage2 (atmosphere/fusee-secondary.bin)"?
  • This is caused by improperly setting up the SD card. When adding files onto the SD card, make sure that you extract the contents of the .zip file first then add only the contents and not the parent folder onto the SD card! Consult the Atmosphere documentation for additional information.
• How do I remove the Training Mod?
  • It's as simple as removing the files associated with the modpack. Make sure you only remove the files that you wish to remove:
    • Skyline, the loader for code plugins like the modpack atmosphere/contents/01006A800016E000/exefs/*
    • Modpack plugins
      • atmosphere/contents/01006A800016E000/romfs/libnn_hid_hook.nro
      • atmosphere/contents/01006A800016E000/romfs/libnro_hook.nro
      • atmosphere/contents/01006A800016E000/romfs/libtraining_modpack.nro
    • Additional static files
      • atmosphere/contents/01006A800016E000/manual_html/html-document/contents.htdocs/*
      • TrainingModpack/* (which is generated by the modpack)
  • Make sure that you only remove the files that you don't want on your SD card anymore (e.g. don't remove skyline if you have other skyline plugins)
• What features are under development?
  • Check the Projects Tab on Github and the Discord for the latest information on new development
• How do I contribute to the modpack?
  • Pull requests to the project repository are welcome for new features and bugfixes.

Build from Source

If you'd like to build the modpack starting from the source code, you can build the NRO using the standard command for skyline plugins:

cargo skyline build --release

To build the entire modpack including supporting files, use the steps in full_build.sh or in the Github Actions specification file.

Prerequisites

• Stable Rust environment with cargo-skyline
• DEVKITPRO switch-dev installation