813: Document remaining public APIs in embassy crate r=lulf a=lulf
This also includes the README.md in the toplevel crate documentation, fixing a few formatting issues with it as well.
Please review the mutex in detail in case I've misunderstood/missed a few things there.
Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
814: Extract setting of lora modulation params r=lulf a=danbev
This commit suggests extracting the lora modulation parameters into a
separate function which can then be called from both the do_tx, and
the do_rx functions.
Co-authored-by: Daniel Bevenius <daniel.bevenius@gmail.com>
This commit suggests extracting the lora modulation parameters into a
separate function which can then be called from both the do_tx, and
the do_rx functions.
811: Sync subghz peripheral support with stm32wlxx-hal r=lulf a=lulf
* A few more registers exposed
* Fix for "sleeping"
* Updating comments
Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
806: Add embassy-cortex-m crate. r=Dirbaio a=Dirbaio
- Move Interrupt and InterruptExecutor from `embassy` to `embassy-cortex-m`.
- Move Unborrow from `embassy` to `embassy-hal-common` (nothing in `embassy` requires it anymore)
- Move PeripheralMutex from `embassy-hal-common` to `embassy-cortex-m`.
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
- Move Interrupt and InterruptExecutor from `embassy` to `embassy-cortex-m`.
- Move Unborrow from `embassy` to `embassy-hal-common` (nothing in `embassy` requires it anymore)
- Move PeripheralMutex from `embassy-hal-common` to `embassy-cortex-m`.
807: Rename channel to mpmc r=huntc a=huntc
I've renamed the channel module for the MPMC as `mpmc`. There was a previous debate about this, but I feel that the strategy here avoids importing `channel::channel`. The change leaves `signal::Signal`, but I think that's ok. It is all a bit subjective of course. The bottom line for me is that I really like the term `mpmc` - it means something to me and aligns with broader naming e.g. in Tokio.
Co-authored-by: huntc <huntchr@gmail.com>
I've renamed the channel module for the MPMC as mpmc. There was a previous debate about this, but I feel that the strategy here avoids importing `channel::channel`. The change leaves `signal::Signal`, but I think that's ok. It is all a bit subjective of course. The bottom line for me is that I really like the term mpmc - it means something to me and aligns with broader naming e.g. in Tokio.
Following the project's decision that "leak unsafe" APIs are not marked as "unsafe",
update PeripheralMutex to accept non-'static state without unsafe.
Fixes#801
797: Use correct index and bank for stm32 flash r=Dirbaio a=lulf
The page index was wrong because it doesn't take FLASH_BASE into account.
For l4, the page index register also depends on a bank selection register.
Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
709: embassy-usb stm32 r=Dirbaio a=Dirbaio
TODO
- [x] Add cfgs for EP_COUNT, EP_MEMORY_ADDR. -- ended up doing it in stm32-data
- [x] Auto-enable PWR USV in stm32l5,
- [x] Auto-enable PWR on other families that need it -- didn't find any
- [ ] ~~Assert at runtime that RCC has valid 48Mhz clock?~~ -- won't do it yet, too messy without rcc cleanup
- [x] Tested on STM32L5
- [x] Tested on STM32F303ZE
- [x] Tested on STM32F103c8
- [x] Fix duplicated irqs on STM32F303 in stm32data, remove workaround in embassy-stm32
- [x] Test HID example
- [x] Test NCM example
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
792: Add example for using a Signal. r=Dirbaio a=hydra
I didn't find an example, so I created one for the STM32H7. Code based on the nrf mutex.rs example.
794: Fix F1 compilation by implementig AF pullup r=Dirbaio a=chemicstry
Embassy fails to compile on `STM32F103RET6`, because `set_as_af_pull` function is missing for GPIOv1:
```
error[E0599]: no method named `set_as_af_pull` found for mutable reference `&mut CLK` in the current scope
--> C:\Users\chemi\.cargo\git\checkouts\embassy-0cff10c9b9902273\46473ae\embassy-stm32\src\sdmmc\mod.rs:1390:21
|
1390 | clk_pin.set_as_af_pull(clk_pin.af_num(), AFType::OutputPushPull, Pull::None);
| ^^^^^^^^^^^^^^ method not found in `&mut CLK`
```
GPIOv1 actually supports pullups in AF mode, but only for inputs. The `sdmmc` driver, which was causing compile errors uses pullups for push-pull outputs and this will silently fail. But IMO not adding pullups to sdmmc interface is a hardware design problem, not HAL.
Co-authored-by: Dominic Clifton <me@dominicclifton.name>
Co-authored-by: chemicstry <chemicstry@gmail.com>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
* Update copyright holder names
Fixes#472
* Add notice file to clarify copyright ownership
The NOTICE file declares that copyright is owned by the individuals
contributing to Embassy, and that all contributed work is licensed under
Apache-2.0 or MIT.
784: stm32: make tick rate configurable r=Dirbaio a=willglynn
The stm32 time drivers support arbitrary tick rates but the associated Cargo features do not. Enabling any time driver presently enables `embassy/time-tick-32768hz`; instead, enable only `embassy/time`.
Additionally, `embassy/time` now functions in the absence of any `embassy/time-tick-*` feature, defaulting to 32768 Hz if left unspecified.
Co-authored-by: Will Glynn <will@willglynn.com>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
