Dario Nieuwenhuis
8bbfa6827c
esp-hosted: add perf hil test.
2023-06-22 21:12:24 +02:00
Dario Nieuwenhuis
837ebe405f
rp: update rp-pac.
2023-06-16 01:41:07 +02:00
Dario Nieuwenhuis
98c821ac39
Remove embassy-cortex-m crate, move stuff to embassy-hal-common.
2023-06-09 16:44:20 +02:00
Dario Nieuwenhuis
3dde01597a
tests/rp: make cyw43-perf less strict.
2023-06-08 21:12:34 +02:00
Dario Nieuwenhuis
4716166041
tests/rp: update cyw43-perf for embassy-net changes.
2023-06-08 20:51:36 +02:00
Dario Nieuwenhuis
6701606e4c
cyw43: add perf HIL test.
2023-06-06 02:50:57 +02:00
Dario Nieuwenhuis
593fc78dd8
tests/rp: enable run-from-ram.
...
Otherwise the flash test is flaky because it attempts to use boot2.
2023-06-06 00:07:03 +02:00
Dario Nieuwenhuis
020e956f1b
ci: run HIL tests in parallel.
2023-05-30 01:10:53 +02:00
kalkyl
b950d6d72b
Add HIL test
2023-05-16 11:28:35 +02:00
pennae
14a5d03af2
rp: remove take!, add bind_interrupts!
2023-05-15 15:24:56 +02:00
bors[bot]
b2047c4351
Merge #1423
...
1423: rp: fix gpio InputFuture and inefficiencies r=pennae a=pennae
InputFuture could not wait for edges without breaking due to a broken From impl, but even if the impl had been correct it would not have worked correctly because raw edge interrupts are sticky and must be cleared from software. also replace critical sections with atomic accesses, and do nvic setup only once.
Co-authored-by: pennae <github@quasiparticle.net>
2023-05-02 12:56:51 +00:00
pennae
849011b826
rp/gpio: set up gpio interrupts only once
...
doing this setup work repeatedly, on every wait, is unnecessary. with
nothing ever disabling the interrupt it is sufficient to enable it once
during device init and never touch it again.
2023-05-02 14:28:27 +02:00
pennae
3c31236c10
rp: remove leftovers from #1414
...
forgot to remove these when they were no longer necessary or useful. oops.
2023-05-02 07:40:12 +02:00
pennae
b58b9ff390
rp/uart: report errors from dma receive
2023-05-01 15:36:53 +02:00
pennae
861f49cfd4
rp/uart: report errors from buffered uart
...
this reports errors at the same location the blocking uart would, which
works out to being mostly exact (except in the case of overruns, where
one extra character is dropped). this is actually easier than going
nuclear in the case of errors and nuking both the buffer contents and
the rx fifo, both of which are things we'd have to do in addition to
what's added here, and neither are needed for correctness.
2023-05-01 15:32:58 +02:00
pennae
1c8492bab2
tests/rp: test error conditions for uart
2023-05-01 15:22:56 +02:00
pennae
bcbe3040a1
tests/rp: fix buffered uart test
...
the rp uart receive fifo is 32 entries deep, so the 31 byte test data
fits into it without needing any buffering. extend to 48 bytes to fill
the entire fifo and the 16 byte test buffer.
2023-05-01 13:00:40 +02:00
Ulf Lilleengen
42a8f1671d
Bump versions preparing for -macros and -executor release
2023-04-27 11:54:22 +02:00
pennae
a4866ad278
rp: add PWM api
2023-04-23 22:49:15 +02:00
pennae
fdd6e08ed6
rp: hook up softfloat rom intrinsics
...
rp-hal has done this very well already, so we'll just copy their entire
impl again. only div.rs needed some massaging because our sio access
works a little differently, everything else worked as is.
2023-04-19 23:04:47 +02:00
Dario Nieuwenhuis
577f060d24
Release embassy-sync v0.2.0
2023-04-13 23:40:49 +02:00
Dario Nieuwenhuis
be37eee13d
Update embedded-hal crates.
2023-04-06 22:41:50 +02:00
Dario Nieuwenhuis
d3c4e4a20a
executor: add Pender, rework Cargo features.
...
This introduces a `Pender` struct with enum cases for thread-mode, interrupt-mode and
custom callback executors. This avoids calls through function pointers when using only
the thread or interrupt executors. Faster, and friendlier to `cargo-call-stack`.
`embassy-executor` now has `arch-xxx` Cargo features to select the arch and to enable
the builtin executors (thread and interrupt).
2023-04-03 03:09:11 +02:00
Lachezar Lechev
7be63b3468
fix: spi transfer bug and additions to test
...
Signed-off-by: Lachezar Lechev <elpiel93@gmail.com>
2023-03-26 18:14:17 +03:00
Lachezar Lechev
cd2f28d2ab
chore: add spi_async tests for uneven buffers
...
Signed-off-by: Lachezar Lechev <elpiel93@gmail.com>
2023-03-24 12:14:38 +02:00
Mathias
89a371d10c
Add HIL test for into_buffered uart on embassy-rp
2023-03-14 12:46:58 +01:00
kalkyl
13d9d8fde1
Refactor after review
2022-12-13 13:49:51 +01:00
kalkyl
d8821cfd41
Feature gate critical-section-impl
2022-12-10 12:57:45 +01:00
kalkyl
cc0248d83a
Select critical-section in tests
2022-12-10 12:42:08 +01:00
Dario Nieuwenhuis
54c153673d
rp: add OutputOpenDrain input test.
2022-12-06 21:09:27 +01:00
Dario Nieuwenhuis
1dcb0ea1f5
Bump defmt-rtt to 0.4
2022-11-29 21:15:24 +01:00
Dario Nieuwenhuis
7b838d0336
rp/uart: use lockfree ringbuffer.
...
This gets rid of another PeripheralMutex usage.
2022-11-25 22:30:47 +01:00
Dario Nieuwenhuis
1e2fb0459d
Switch to async-fn-in-trait
2022-11-25 21:02:06 +01:00
Mathias
bc21b6efaf
Add delay to flash test to allow time to parse RTT header
2022-10-27 12:49:20 +02:00
Mathias
a7b90c7fb6
Remove unused imports from test
2022-10-27 11:36:46 +02:00
Mathias
c871fe0848
Rebase on master
2022-10-27 07:12:34 +02:00
Dario Nieuwenhuis
eeb072d9cb
Update Rust nightly.
2022-10-26 16:47:29 +02:00
Mathias
80e58426fc
Add flash example & flash HIL test
2022-10-26 12:24:04 +02:00
chrysn
6718ca3a94
all Cargo.toml: Add license to all crate Cargo.toml files
...
Closes: https://github.com/embassy-rs/embassy/issues/1002
2022-10-07 12:41:56 +02:00
Ulf Lilleengen
72c2e985bb
Update embedded-hal versions and explicitly pin
2022-09-29 11:27:46 +02:00
Mathias
e129a97d48
Fix bufferedUart read and write tests
2022-09-27 07:45:10 +02:00
Mathias
93354b812c
Extend buffered-uart test to transmit 32 bytes
2022-09-27 05:54:31 +02:00
Dario Nieuwenhuis
c863acd24f
rp: set correct teleprobe target for rpi-pico tests.
2022-09-26 20:36:06 +02:00
Mathias
f76444bdc4
Add HIL test for bufferedUart
2022-09-26 20:34:55 +02:00
Dario Nieuwenhuis
75e93cc142
rp: enable time-driver in Cargo.toml instead of ci.sh
2022-09-26 20:33:20 +02:00
Dario Nieuwenhuis
10d1ad2343
Replace futures::future::join -> embassy_futures::join::join.
2022-09-22 16:48:35 +02:00
Henrik Alsér
9ff5c50774
Cleanup examples
2022-09-01 15:12:44 +02:00
Henrik Alsér
7954cbc4e7
Add HIL tests
2022-09-01 15:12:44 +02:00
Mathias
bd27b9080f
Add HIL tests of DMA & UART, and correctly set DREQ for uart DMA
2022-08-26 12:55:15 +02:00
Dario Nieuwenhuis
21072bee48
split embassy-util
into embassy-futures
, embassy-sync
.
2022-08-22 22:18:13 +02:00
Dario Nieuwenhuis
5daa173ce4
Split embassy-time from embassy-executor.
2022-08-18 01:22:30 +02:00
Dario Nieuwenhuis
fc6e1e06b3
Remove HAL initialization from #[embassy::main] macro.
2022-08-17 22:16:46 +02:00
Dario Nieuwenhuis
67edea4168
Update to critical-section 1.0, atomic-polyfill 1.0
2022-08-17 19:01:56 +02:00
Dario Nieuwenhuis
a0f1b0ee01
Split embassy crate into embassy-executor, embassy-util.
2022-07-29 23:40:36 +02:00
Daniel Bevenius
8979959dd1
Add embedded_hal_async support for embassy-rp
...
This commit adds support for embedded-hal-async to the Embassy
Raspberry PI crate.
2022-07-14 13:52:22 +02:00
Dario Nieuwenhuis
ccf57cfab6
rp: add GPIO HIL test.
2022-07-09 02:14:30 +02:00