57 lines
1.8 KiB
Markdown
57 lines
1.8 KiB
Markdown
# cyw43
|
|
|
|
Rust driver for the CYW43439 wifi chip, used in the Raspberry Pi Pico W. Implementation based on [Infineon/wifi-host-driver](https://github.com/Infineon/wifi-host-driver).
|
|
|
|
## Current status
|
|
|
|
Working:
|
|
|
|
- Station mode (joining an AP).
|
|
- AP mode (creating an AP)
|
|
- Scanning
|
|
- Sending and receiving Ethernet frames.
|
|
- Using the default MAC address.
|
|
- [`embassy-net`](https://embassy.dev) integration.
|
|
- RP2040 PIO driver for the nonstandard half-duplex SPI used in the Pico W.
|
|
- Using IRQ for device events
|
|
- GPIO support (for LED on the Pico W)
|
|
|
|
TODO:
|
|
|
|
- Setting a custom MAC address.
|
|
- Bus sleep (for power consumption optimization)
|
|
|
|
## Running the examples
|
|
|
|
- `cargo install probe-rs --features cli`
|
|
- `cd examples/rp`
|
|
### Example 1: Scan the wifi stations
|
|
- `cargo run --release --bin wifi_scan`
|
|
### Example 2: Create an access point (IP and credentials in the code)
|
|
- `cargo run --release --bin wifi_ap_tcp_server`
|
|
### Example 3: Connect to an existing network and create a server
|
|
- `cargo run --release --bin wifi_tcp_server`
|
|
|
|
After a few seconds, you should see that DHCP picks up an IP address like this
|
|
```
|
|
11.944489 DEBUG Acquired IP configuration:
|
|
11.944517 DEBUG IP address: 192.168.0.250/24
|
|
11.944620 DEBUG Default gateway: 192.168.0.33
|
|
11.944722 DEBUG DNS server 0: 192.168.0.33
|
|
```
|
|
This example implements a TCP echo server on port 1234. You can try connecting to it with:
|
|
```
|
|
nc 192.168.0.250 1234
|
|
```
|
|
Send it some data, you should see it echoed back and printed in the firmware's logs.
|
|
|
|
## License
|
|
|
|
This work is licensed under either of
|
|
|
|
- Apache License, Version 2.0 ([LICENSE-APACHE](LICENSE-APACHE) or
|
|
<http://www.apache.org/licenses/LICENSE-2.0>)
|
|
- MIT license ([LICENSE-MIT](LICENSE-MIT) or <http://opensource.org/licenses/MIT>)
|
|
|
|
at your option.
|
|
|