Caleb Garrett
c2b03eff62
GCM mode functional.
2024-02-25 20:59:07 -05:00
Caleb Garrett
565acdf243
CTR mode functional.
2024-02-25 20:59:07 -05:00
Caleb Garrett
72e4cacd91
CBC and ECB AES modes functional.
2024-02-25 20:59:07 -05:00
Caleb Garrett
a0a8a4ec86
Support CBC, ECB, CTR modes.
2024-02-25 20:59:07 -05:00
Caleb Garrett
79e5e8b052
Add cryp configuration.
2024-02-25 20:59:07 -05:00
Dario Nieuwenhuis
489d0be2a2
stm32/rcc: unify naming sysclk field to sys, enum to Sysclk.
2024-02-26 00:00:17 +01:00
Dario Nieuwenhuis
497515ed57
Merge pull request #2583 from OroArmor/tim_pll_clk
...
Enable PLL Clocks for TIMx peripherals on STM32F3xx Chips
2024-02-25 22:45:48 +00:00
Corey Schuhen
a737a7350e
FDCAN: Remove history from comments.
2024-02-25 10:14:12 +10:00
Corey Schuhen
1327a644b6
FDCAN: Don't require internal module for public API.
2024-02-25 10:14:12 +10:00
Corey Schuhen
0565098b06
FDCAN: Fix some indenting in macros
2024-02-25 10:14:12 +10:00
Corey Schuhen
a061cf3133
FDCAN: Allow access to buffered senders and receivers.
2024-02-25 10:14:12 +10:00
Corey Schuhen
779898c0e7
FDCAN: Expose some pub types in API
2024-02-25 10:14:12 +10:00
Corey Schuhen
2d634d07e0
FDCAN: Remove extra traits from.
...
Comments
Fix.
2024-02-25 10:13:58 +10:00
Eli Orona
394abda092
Fix report with the same name
2024-02-24 12:58:38 -08:00
Eli Orona
e79d2dd756
Move to internal mod and re-export the enums
2024-02-24 12:54:58 -08:00
Dario Nieuwenhuis
e67dfcb04f
stm32/dma: add AnyChannel, add support for BDMA on H7.
2024-02-24 02:41:41 +01:00
Dario Nieuwenhuis
f77d59500e
Merge pull request #2618 from barnabywalters/g4rcc
...
[embassy-stm32] G4 RCC refactor amendments and additions
2024-02-23 13:05:01 +00:00
Barnaby Walters
b091ffcb55
[embassy-stm32] G4 RCC refactor amendments and additions
...
* Added assertions for a variety of clock frequencies, based on the reference manual and
stm32g474 datasheet. The family and numbers are consistent enough that I’m assuming
these numbers will work for the other chips.
* Corrected value of pll1_q in set_clocks call, added pll1_r value
2024-02-23 01:59:24 +01:00
Dario Nieuwenhuis
a6a5d9913c
Merge branch 'main' into stm32l0-reset-rtc
2024-02-23 01:45:10 +01:00
Dario Nieuwenhuis
0665e0d452
stm32/rcc: port U5 to new API, add all PLLs, all HSE modes.
2024-02-23 01:24:05 +01:00
Dario Nieuwenhuis
4481c5f3cc
Merge pull request #2616 from embassy-rs/h5-stupid-errata
...
stm32/rcc: workaround nonsense RAM suicide errata on backup domain reset.
2024-02-23 00:25:30 +01:00
Dario Nieuwenhuis
475dea0208
stm32/rcc: workaround nonsense RAM suicide errata on backup domain reset.
2024-02-23 00:18:24 +01:00
Dario Nieuwenhuis
9c918f6474
Merge pull request #2588 from cschuhen/feature/fdcan_buffered
...
Add FDCAN Buffered mode.
2024-02-23 00:07:05 +01:00
Eli Orona
88e29608ed
Rust fmt
2024-02-20 17:59:51 -08:00
Eli Orona
2ee9b37373
Move to a single Mux Struct.
2024-02-20 17:54:35 -08:00
Joonas Javanainen
9b2d096f4f
USB needs PWR_CR2 USV set on STM32L4
...
Confirmed to be needed on an STM32L422, and based on a quick look at
L4/L4+ reference manuals, this bit is present and required to be set on
all L4 chips that have some kind of USB peripheral (USB or OTG_FS).
The `usb_otg` driver already sets it for `cfg(stm32l4)` and we should do
the same thing here.
2024-02-20 21:47:13 +02:00
Dario Nieuwenhuis
55187c7276
Merge pull request #2602 from embassy-rs/peripheralref-no-derefmut
...
hal-internal: remove impl DerefMut for PeripheralRef.
2024-02-20 13:51:01 +00:00
Dario Nieuwenhuis
e8474426d8
hal-internal: remove impl DerefMut for PeripheralRef.
...
if you have `PeripheralRef<'a, AnyPIn>` for pin A, and `AnyPin` (owned) for pin B, you can `mem::swap` them.
so, getting access forever to pin A, just by "sacrificing" pin B
this defeats the point of PeripheralRef, which is if you got a `PeripheralRef<'a, T>` then you're only allowed to use the peripheral for `'a`.
Also some drivers rely on the fact only one instance of a singleton exists for soundness, so this is a soundness fix for those.
2024-02-20 01:02:15 +01:00
Torin Cooper-Bennun
67230dc444
flash: h50: first pass at implementation
2024-02-19 16:05:50 +00:00
fe1es
5b7e2d8826
stm32/rcc: reset RTC on stm32l0
2024-02-19 15:25:24 +09:00
Corey Schuhen
eafa90cd07
Remove the OperatingMode typestates
...
Instead have two explcit types(without the mode generic arg)types:
- One for config
- One for all operating modes
2024-02-18 13:09:37 +10:00
Zach
dd9f0d9d9e
support u5 flash
2024-02-17 12:04:53 -06:00
Corey Schuhen
5ad291b708
Add a buffered mode.
2024-02-17 18:26:57 +10:00
Corey Schuhen
91c75c92a0
Clean up and prep for buffered IRQ mode.
...
- Reduce code duplicaiton in read/write methods
- General clean-up
- Prepare for buffered mode
2024-02-17 18:26:57 +10:00
Corey Schuhen
5d8c54fdea
Move error conversion to peripheral.rs
2024-02-17 18:25:58 +10:00
Corey Schuhen
200ace566f
Don't use word Standard for frame format because it can be confused with ID format. Use Classic instead to mean CAN 2.0B frames.
2024-02-17 18:25:58 +10:00
Corey Schuhen
70b3c4374d
Port FDCAN HAL to use PAC directly instead of fdcan crate.
...
- Provide separate FDCAN capable and Classic CAN API's
- Don't use fdcan crate dep anymore
- Provide embedded-can traits.
2024-02-17 18:25:58 +10:00
Eli Orona
e99ef49611
Move to auto-generated based system.
2024-02-16 19:57:00 -08:00
Dario Nieuwenhuis
a3f508e6d1
Merge pull request #2570 from eZioPan/time-driver-singleton
...
Add missing TIM for time-driver; reorder time-driver selection when use "time-drvier-any"
2024-02-17 02:34:45 +00:00
Eli Orona
c99c4a01a9
Update f013.rs
2024-02-16 16:47:38 -08:00
Eli Orona
7592e8be6e
Fix build
2024-02-16 16:45:58 -08:00
Eli Orona
77739faaeb
Rustfmt
2024-02-16 16:42:19 -08:00
Eli Orona
370db9fb06
Update f013.rs
...
Add stm32f398
2024-02-16 16:39:23 -08:00
Dario Nieuwenhuis
9352621058
Merge pull request #2579 from barnabywalters/g4rcc
...
[embassy-stm32]: stm32g4 RCC refactor
2024-02-16 23:38:49 +00:00
Barnaby Walters
6d7458dac7
Refinements
...
* Implemented boost mode dance (RM0440 p234-245, 6.5.1)
* Enabled boost mode in usb_serial example, tested on hardware
* Removed hard requirement of a valid 48MHz source (HSI48 is checked if
requested, PLL passed through as-is and assumed to be valid)
* Used calc_pclk to calculate APB frequencies
* Refactored 48MHz configuration code to remove unnecessary let and block
* Renamed ahb_freq to hclk for clarity and consistency
2024-02-17 00:30:16 +01:00
Barnaby Walters
a24087c36c
Configured SYSCLK after boost mode, added comments
2024-02-16 21:52:58 +01:00
Barnaby Walters
e465dacf73
Added documentation, fixed and refined boost and flash read latency config
2024-02-16 21:34:12 +01:00
Barnaby Walters
25a95503f6
Configured HSI48 if enabled, assert is enabled if chosen as clk48 source
2024-02-16 20:41:04 +01:00
Barnaby Walters
ae74833999
Removed redundant HSI48 configuration
2024-02-16 20:32:35 +01:00
Barnaby Walters
32e4c93954
Removed dangling doc comments
2024-02-16 19:58:19 +01:00
