Caleb Garrett
61050a16d5
Add CRYP DMA support. Updated example.
2024-03-12 12:01:14 -04:00
Timo Kröger
30cdc6c9c5
[UCPD] Disable dead-battery resistor for all families
...
Using the code from PR #2683 , thank you @ExplodingWaffle
Removes the dead-battery as selectable option because its unclear if
it can be re-enabled. Also there is no use case for it because the same
resistor can be configured with the sink option.
2024-03-12 08:49:27 +01:00
Timo Kröger
eeb033caf0
[UCPD] Disable RCC clock on drop
2024-03-12 08:14:42 +01:00
Timo Kröger
89504f5162
[UCPD] Split into CC and PD phy
...
PD3.0 spec requires concurrent control of CC resistors for collision avoidance.
Needed to introduce some "ref counting" (its just a bool) for drop code.
2024-03-12 08:14:42 +01:00
Timo Kröger
99854ff840
[UCPD] Fix build for devices with GPDMA
...
Do not use a flag that is DMA/BDMA only, not required anyway
the transfer should run in the background nevertheless
2024-03-12 08:14:42 +01:00
Timo Kröger
ff8129a6a6
[UCPD] Implement hard reset transmission
2024-03-12 08:14:42 +01:00
Timo Kröger
c1efcbba2d
[UCPD] Receive hard resets
2024-03-12 08:14:42 +01:00
Timo Kröger
b7972048a1
[UCPD] Improve example and defmt Format for enums
2024-03-12 08:14:42 +01:00
Timo Kröger
5e271ff31b
[UCPD] Combine RX and TX
...
`select(rx.receive(), tx.transmit()` had subtle interrupt enable race conditions.
Combine receiver and transmitter into one new `PdPhy` struct to disallow the
problematic pattern.
Scanning through the USB PD 2.0 specification there is no need to have RX and TX
running concurrently (after all the USB PD communication is half-duplex).
2024-03-12 08:14:42 +01:00
Timo Kröger
36a9918921
[UCPD] Implement PD transmitter
2024-03-12 08:14:42 +01:00
Timo Kröger
984d5bbc72
[UCPD] Implement PD receiver
2024-03-12 08:14:42 +01:00
Timo Kröger
4d0e383816
[UCPD] Prepare for PD communication implementation
2024-03-12 08:14:42 +01:00
Timo Kröger
a3b1222617
[UCPD] Improve Type-C CC handling
...
* Improved interrupt handling: Clear flags in ISR, check state change in future
* Disable pull-up/pull-down resistors and voltage monitor on drop
* nightly rustfmt
2024-03-12 08:14:42 +01:00
Timo Kröger
d99fcfd0c2
[UCPD] Configuration Channel (CC) handling
2024-03-12 08:14:42 +01:00
Timo Kröger
aa1411e2c7
[UCPD] Prepare interrupt handle
2024-03-12 08:14:41 +01:00
Timo Kröger
8a255b375b
[UCPD] Instance and Pin Traits
...
Skip FRSTX pin for now. Its available twice in the device JSON as
FRSTX1 and FRSTX2 both with the same pins as targets.
I don’t know enough about the FRS (fast role switch) feature to
understand if that is correct and how to handle the pins.
2024-03-12 08:14:41 +01:00
Dario Nieuwenhuis
1ef02e5384
Merge pull request #2683 from ExplodingWaffle/ucpd-dbdis
...
stm32: add disable_ucpdx_dead_battery
2024-03-11 23:36:15 +00:00
Harry Brooke
d4869b83fc
disable -> enable. also extracted to function for easy refactoring later
2024-03-11 23:03:09 +00:00
Dominic
b6a383811a
Improve panic message when requesting frequency higher than clock
...
Previously it would panic with message "unreachable", which isn't
particularly clear about what the problem is and how to fix it.
2024-03-11 17:52:18 +01:00
Caleb Garrett
6e9e8eeb5f
Refactored cryp din/dout into functions.
2024-03-11 11:08:02 -04:00
Harry Brooke
096d147dce
stm32: add disable_ucpdx_dead_battery
2024-03-11 11:42:04 +00:00
Harry Brooke
f761f721bc
fix ci
2024-03-10 22:51:42 +00:00
Caleb Garrett
4a5b6e05fb
Correct more CI build issues.
2024-03-10 17:33:40 -04:00
Caleb Garrett
50a7ada0bb
Fixed DMA CI build issues.
2024-03-10 17:28:53 -04:00
Caleb Garrett
e92094986d
Add DMA request priority as transfer option.
2024-03-10 16:53:37 -04:00
Adam Greig
b456addb2b
stm32: bump metapac version
2024-03-09 20:13:20 +00:00
Harry Brooke
2d7ec281e8
stm32/rcc: wait for peripheral clock to be active. also, hold the peripheral reset while enabling the clock.
2024-03-09 18:24:31 +00:00
Dominic
71179fa818
Check for CPU_FREQ_BOOST
2024-03-09 11:55:09 +01:00
Dominic
fadffc5061
Fix incorrect D1CPRE max for STM32H7 RM0468
2024-03-09 11:55:09 +01:00
Ralf
b7bb4b23f8
STM32 SimplePwm: Fix regression and re-enable output pin
...
PR #2499 implemented timer hierarchy, but removed enable_outputs()
from trait CaptureCompare16bitInstance and from SimplePwm.
This functions is required for advanced timers to set bit BDTR.MOE
and to enable the output signal.
2024-03-08 11:18:45 +01:00
Dario Nieuwenhuis
b2d236ee39
Merge pull request #2667 from timokroeger/stm32-anychannel-fix
...
stm32: Implement `Channel` trait for `AnyChannel`
2024-03-07 15:18:32 +00:00
Tomas Barton
bb3711bbf9
update stm32c0 HSI frequency
2024-03-07 06:51:32 -08:00
Timo Kröger
bbc06458a3
stm32: Implement Channel
trait for AnyChannel
2024-03-07 15:05:28 +01:00
Corey Schuhen
84d21e959d
Dummy
2024-03-07 17:45:01 +10:00
Corey Schuhen
98e7a0a423
Remove old PAC from bscan crate.
2024-03-07 17:45:01 +10:00
Corey Schuhen
9ba379fb9e
Remove usage of old PAC
...
Formatting
2024-03-07 17:45:01 +10:00
Corey Schuhen
65b38cf755
Fix examples and improve imports required.
2024-03-07 17:45:01 +10:00
Corey Schuhen
a9ff38003b
Documentation.
...
.
2024-03-07 17:45:01 +10:00
Corey Schuhen
455cc40261
Port registers access to using Embassy PAC
...
Use stm32-metapac for filters module.
2024-03-07 17:45:01 +10:00
Corey Schuhen
b0f05e7682
Remove unused.
2024-03-07 17:45:01 +10:00
Corey Schuhen
34687a0956
Apply cargo fmt
...
Formatting.
2024-03-07 17:45:01 +10:00
Corey Schuhen
fecb65b988
Make use of internal BXCAN crate work. Tested on stm32f103 with real bus and HIL tests.
...
Fix
2024-03-07 17:45:01 +10:00
Corey Schuhen
f736f1b27f
RAW copy of files from BXCAN crate. No changes whatsoever.
2024-03-07 17:45:01 +10:00
Torin Cooper-Bennun
e0018c6f4f
stm32: can:fd: merge read impls; buffered RX returns Result<_, BusError>
2024-03-04 12:38:46 +00:00
Torin Cooper-Bennun
72c6cdc5d5
stm32: can: fd: rename TxBufferMode::Queue -> ::Priority for clarity
2024-03-04 12:22:18 +00:00
Dario Nieuwenhuis
ae266f3bf5
stm32/rcc: port c0 to new api. Add c0 HSIKER/HSISYS support.
2024-03-04 00:08:14 +01:00
Dario Nieuwenhuis
c8c4b0b701
stm32/rcc: port g0 to new api.
2024-03-04 00:04:06 +01:00
Dario Nieuwenhuis
b4567bb8c5
stm32/rcc: g4: consistent PllSource, add pll pqr limits, simplify a bit.
2024-03-04 00:04:06 +01:00
Corey Schuhen
b693ab9b34
Restore init order to restore H7.
...
Previous commit broke H7 support in HIL farm. Restore previous order by moving a bunch of config from new and into_config_mode to apply_config.
This is a cleanup that I had considered to move more register access into peripheral.rs.
2024-03-02 14:18:12 +10:00
Corey Schuhen
bf06d10534
Delay setting TX buffer mode until user had a chance to configure it.
2024-03-02 14:00:56 +10:00