NaxdyOrg/embassy
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
3811 commits 3 branches 0 tags 16 MiB
Commit graph

1003 commits

Author SHA1 Message Date
Joonas Javanainen
e88559c5ca
Use defmt-friendly error handling 2022-04-30 11:41:17 +03:00
Dario Nieuwenhuis
804b20c5af stm32/eth: make "ethmac" vs "eth" consistent in RCC regs. 2022-04-30 04:49:57 +02:00
David Lenfesty
5e6c4ae024 embassy-stm32/eth: consolidate v1a/v1c and add v1b 
The only differences between v1a and v1c were clocks and GPIO, v1b will
likely work out of the box (or simply need minor tweaks)
 2022-04-30 04:49:24 +02:00
David Lenfesty
2e7b42fc5b embassy-stm32/eth: convert LAN8742 driver to generic SMI driver 
SMI Ethernet PHYs all share a common base set of registers that can do
90% of all tasks. The LAN8742 driver used some vendor-specific
registers to check link negotiation status, but the need for that was
debatable, so I migrated it to a generic driver instead, anybody who
wants extra functionality can copy it and impl their own on top of it.
 2022-04-30 04:49:24 +02:00
David Lenfesty
905b40e212 embassy-stm32/eth/v1a: configure pins correctly for f107 
v1a works correctly!
 2022-04-30 04:49:24 +02:00
David Lenfesty
0d2ef1099b initial work porting eth to f107 2022-04-30 04:49:24 +02:00
David Lenfesty
f30e5d2d3f Initial import to v1a, does not compile 2022-04-30 04:49:24 +02:00
Joonas Javanainen
07ad52162b
Add PLL config support for F2 2022-04-29 18:21:40 +03:00
Joonas Javanainen
0cfe1dc9df
Move HSE config out of main clock mux 
This makes the configuration more flexible and closer to the underlying
configuration register structure. For example, we could use HSI for the
system clock, but use HSE to output a clock with MCO.
 2022-04-29 17:51:18 +03:00
Matous Hybl
7538f57d62 Remove unnecessary feature gating for giant transfers in DCMI 2022-04-27 16:53:20 +02:00
Ulf Lilleengen
da61611f8f Add bootloader to CI 2022-04-27 15:17:18 +02:00
Ulf Lilleengen
484e0acc63 Add stm32 flash + bootloader support 
* Add flash drivers for L0, L1, L4, WB and WL. Not tested for WB, but
should be similar to WL.
* Add embassy-boot-stm32 for bootloading on STM32.
* Add flash examples and bootloader examples
* Update stm32-data
 2022-04-27 15:17:18 +02:00
Dario Nieuwenhuis
009bb8e4e1 stm32: add stm32u5 GPDMA, SPIv4 support, add HIL tests. 2022-04-27 01:16:14 +02:00
Matous Hybl
945fa0871f Implement giant (chunked) DMA transfers for DCMI. 2022-04-25 14:30:43 +02:00
Dario Nieuwenhuis
3251a21fb7 Switch to crates.io embedded-hal, embedded-hal-async. 
This temporarily removes support for the async UART trait, since it's
not yet in embedded-hal-async.
 2022-04-22 19:58:24 +02:00
Dario Nieuwenhuis
e5a843dc06 net: auto-enable defmt in smoltcp using namespaced features. 2022-04-13 17:46:27 +02:00
bors[bot]
6d0e6d563d
Merge #714 
714: add more clock options for l4 and l5 r=Dirbaio a=ant32

- added an assert so it panics if pll48div is not 48Mhz
- added MSI as a clock source for PLL
- removed hsi48 option for MCUs mentioned in l4 rcc presentation
- copied some code from l4 to l5, but don't have a way of testing it.

Co-authored-by: Philip A Reimer <antreimer@gmail.com>
 2022-04-12 21:42:36 +00:00
bors[bot]
77c2b151c2
Merge #715 
715: stm32/dac: Check proper channel r=Dirbaio a=michalsrb

Small fix. Otherwise it panics when trying to use channel 1 if channel 2 does not exist.

Co-authored-by: Michal Srb <michalsrb@gmail.com>
 2022-04-12 20:57:36 +00:00
Matous Hybl
371f3ef419 Add ADC support for H7 2022-04-12 22:25:00 +02:00
Michal Srb
c1914a477d stm32/dac: Check proper channel 2022-04-12 12:49:06 +02:00
Philip A Reimer
d90ecbbe40 add more clock options for l4 and l5 2022-04-11 19:11:02 -06:00
Philip A Reimer
d8860c0b80 add stm32l4 hsi48 and usb example 2022-04-09 14:55:03 -06:00
Dario Nieuwenhuis
8b757e1aec Add stm32wlexx support 2022-04-08 03:43:58 +02:00
Dario Nieuwenhuis
0c07d03754 Add missing stm32wl/stm32wb chips except stm32wle 2022-04-08 03:15:27 +02:00
Dario Nieuwenhuis
50ff63ab88 Add STM32L5 support. 2022-04-08 03:11:38 +02:00
Matous Hybl
eb6910fa86 Reexport unborrow macro in HALs 2022-04-07 12:57:02 +02:00
Dario Nieuwenhuis
aee19185b7 Add more docserver metadata. 2022-04-05 21:05:09 +02:00
Philip A Reimer
1f59f8e7d0 add pllsai1 and allow for 120Mhz clock on stm32l4+ 2022-04-01 22:42:43 -06:00
chemicstry
d052631118 Fix STM32 timer interrupt bug 2022-03-30 00:27:33 +03:00
Joonas Javanainen
83211c2b61
Add workaround for F2 errata 2022-03-27 19:00:36 +03:00
Joonas Javanainen
a608d0deaf
Add minimal STM32F2 RCC 
No support for PLL or other clocks than SYSCLK/AHB/APB1/APB2
 2022-03-27 18:40:49 +03:00
Joonas Javanainen
08e6a996bc
Regenerate embassy-stm32 features 2022-03-21 00:19:36 +02:00
bors[bot]
37ada65a33
Merge #669 
669: Add SDMMC v1 and SDIO support r=Dirbaio a=chemicstry

SDMMC v2 peripheral is an extension of SDMMC v1 (or SDIO) so I managed to reuse most of the code, with some cfg's.

Apart from small differeces in registers, the biggest change is that v2 uses internal DMA, while v1 has to use shared DMA peripheral. This makes code a bit uglier, because DMA channel for v1 has to be passed around. Not sure if it's possible to make it any cleaner.

This also adds `TransferOptions` structure to DMA, because SDMMC v1 requires setting peripheral flow control and burst transfers. Let me know if some alternative way would be prefered.

I tested this on STM32F429ZIT6 (with sd card) and STM32H745ZIT6 (with oscilloscope).

Depends on: https://github.com/embassy-rs/stm32-data/pull/130

Co-authored-by: chemicstry <chemicstry@gmail.com>
 2022-03-20 20:19:58 +00:00
bors[bot]
f0a071790d
Merge #673 
673: Inline GPIO functions r=Dirbaio a=nviennot

All GPIO functions are monomorphized (per pin). Inlining these make the ROM smaller when using opt-level="z"

Co-authored-by: Nicolas Viennot <nicolas@viennot.biz>
 2022-03-19 20:34:07 +00:00
Nicolas Viennot
4aba87f983 Inline GPIO functions 
All GPIO functions are monomorphized (per pin). Inlining these make the
ROM smaller when using opt-level="z"
 2022-03-19 14:06:11 -04:00
chemicstry
bdeb537ffa Fix compile for stm32wb 2022-03-18 01:33:39 +02:00
chemicstry
b30a42aff8 Fix RCC safety and add reset to DAC 2022-03-18 01:16:07 +02:00
chemicstry
ca88ace98d Reset peripherals on enable 2022-03-18 00:46:46 +02:00
chemicstry
d26b751edc Add comments 2022-03-17 19:41:44 +02:00
chemicstry
051c6350ea Make UART futures Send 2022-03-17 18:23:47 +02:00
chemicstry
c24d482d51 Fix DMA channels 2022-03-17 01:54:56 +02:00
chemicstry
24a9e19062 More cleanup 2022-03-17 01:12:29 +02:00
chemicstry
9d71acc49e Cleanup 2022-03-16 23:55:07 +02:00
chemicstry
224071f08e Add F7 example 2022-03-16 23:44:02 +02:00
chemicstry
ea467e0acb Rename DMA trait 2022-03-16 20:30:57 +02:00
chemicstry
8a8e5c4b73 Fix SDMMC v2 and add H7 example 2022-03-16 20:20:39 +02:00
chemicstry
48fc48ea7d Fix BDMA 2022-03-16 19:41:34 +02:00
chemicstry
bf4a38ac06 Use RCC frequency instead of config 2022-03-16 19:09:37 +02:00
chemicstry
6d547b1143 SDIO working on stm32f4 2022-03-16 18:52:27 +02:00
chemicstry
34b5175d2c Add more options to DMA 2022-03-16 18:52:06 +02:00
chemicstry
2d224cf6a0 Update 2022-03-15 19:58:19 +02:00
Ulf Lilleengen
e09bde9345 Add support for splitting stm32 usart into TX and RX 
* Keeps existing API for usart, but wraps it in Tx and Rx sub-types
* Adds split() method similar to nRF for getting indepdendent TX and RX
  parts
* Implements e-h traits for TX and RX types
* Add stm32h7 example
 2022-03-15 10:35:37 +01:00
Dario Nieuwenhuis
1dc618f0e4 stm32/spi: fix blocking transfer hanging after async. 2022-03-15 04:13:33 +01:00
Grant Miller
49ef19c0b2 stm32/spi: Clear rx fifo in blocking methods 2022-03-14 21:55:37 -05:00
Dario Nieuwenhuis
059b164234 stm32/spi: do not clear rxfifo in SPIv3, the hw already does it. 2022-03-15 02:37:08 +01:00
Dario Nieuwenhuis
4579192832 stm32/spi: fix hang in SPIv3 by not waiting for rxfifo empty in finish_dma. 2022-03-15 02:36:34 +01:00
Dario Nieuwenhuis
306110f56e stm32/spi: implement async trasnfer_in_place 2022-03-15 00:40:48 +01:00
Grant Miller
f1d6c95205 rustfmt 2022-03-14 18:22:41 -05:00
Grant Miller
71632648c7 Fix zero-length-slice bugs 2022-03-14 18:14:55 -05:00
Grant Miller
15c533fe2a Fix async write bug 2022-03-14 18:04:31 -05:00
Grant Miller
6e00c58854 Make all functions generic over word size 2022-03-14 16:53:50 -05:00
Grant Miller
f0b62bc8e0 Use const REGS 2022-03-14 15:56:08 -05:00
Grant Miller
482ffea4dd Finish unification 2022-03-14 15:56:08 -05:00
Grant Miller
406b1b3dd2 Finish matching versions 2022-03-14 15:56:08 -05:00
Grant Miller
7cd6f00a90 Add set_txdmaen and set_rxdmaen functions 2022-03-14 15:56:08 -05:00
Grant Miller
444b37fcdf Add flush_rx_fifo function 2022-03-14 15:56:08 -05:00
Grant Miller
683c11f399 Call set_word_size before disabling SPE 2022-03-14 15:56:08 -05:00
Dario Nieuwenhuis
9bad9365dc Update rust nightly, embedded-hal 1.0, embedded-hal-async. 2022-03-11 00:38:07 +01:00
Dario Nieuwenhuis
77841a4676 stm32/dma: panic on DMA error. 2022-03-09 03:19:05 +01:00
Grant Miller
8f7bb570ae Ignore BDMA1 in H7 2022-03-08 16:46:42 -06:00
Grant Miller
8c45c98e41 stm32: Refactor DMA interrupts 
Previously, every dma interrupt handler called the same `on_irq`
function which had to check the state of every dma channel.

Now, each dma interrupt handler only calls an `on_irq` method for its
corresponding channel or channels.
 2022-03-08 14:18:31 -06:00
Timo Kröger
372b71890d [can] Typo fix: l7 -> f7 2022-03-05 09:46:06 +01:00
Timo Kröger
d6d25e6470 [can] cfgs for naming inconsistencies 
Approach is similar to USB OTG.
STM32L49x and STML4Ax have CAN1 and CAN2.
All others STM32L4xx do only have CAN1.
STM32F72x and STM32F73x are the only F7 devices with only CAN1.
 2022-03-05 09:46:06 +01:00
Timo Kröger
6929350552 [can] Update macrotable comment 
The chip description are corrected in:
https://github.com/embassy-rs/stm32-data/pull/123
 2022-03-05 09:46:06 +01:00
Timo Kröger
4c30543938 [can] Do not use wildcard reexport for bxcan 2022-03-05 09:46:06 +01:00
bors[bot]
9ebf7eee6d
Merge #652 #653 
652: Use new stm32-data registers and fix AHB clock calculation r=Dirbaio a=msamsonoff

This is the follow-on to my PR against stm32-data that added new register enums for the G0. I have updated the G0 RCC module to use those new enums.

I have also fixed an issue with the calculation of the AHB clock rate. 32 is not available as an AHB prescaler. The sequence jumps from 16 to 64. The original bit shifting math did not account for this gap. I have replaced it with a `match` instead.

653: Fixes for rustdoc building. r=Dirbaio a=Dirbaio



Co-authored-by: Matthew W. Samsonoff <matt.samsonoff@gmail.com>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
 2022-03-04 17:07:04 +00:00
Dario Nieuwenhuis
609975f821 rustfmt 2022-03-04 18:04:12 +01:00
Matthew W. Samsonoff
047ff9a2f2 Use new stm32-data registers and fix AHB clock calculation 
The original code for calculating the AHB clock did not account for the gap in
prescaler values (32 is not an available value.) The bit shifting and math has
been replaced by a `match`.
 2022-03-04 18:03:55 +01:00
Dario Nieuwenhuis
265cd1115b stm32: allow unused macrotables. 2022-03-04 18:03:41 +01:00
Dario Nieuwenhuis
44096358a2 docs: add metadata.embassy_docs to cargo tomls. 2022-03-04 18:03:41 +01:00
Dario Nieuwenhuis
53d9a0b516 stm32: exclude spammy files from docs by prefixing with _. 
These files end up containing chip-specific info, so they deduplicate
really badly when building docs for all 1200 chips.

The doc generator removes files starting with `_`.
 2022-03-04 18:03:41 +01:00
Dario Nieuwenhuis
94b232cf88 docs: prevent inline doc spam for reexports. 2022-03-04 18:03:41 +01:00
Matous Hybl
0172ca5b81 stm32: Add support for using TIM12 and TIM15 as time driver 2022-02-28 19:20:22 +01:00
Matous Hybl
a88c5e716e stm32: Register access for timers now doesn't require self 2022-02-28 16:20:42 +01:00
Dario Nieuwenhuis
dd828a7a92 stm32: move macrotables to embassy-stm32 build.rs 2022-02-26 03:23:09 +01:00
Dario Nieuwenhuis
e6299549a0 stm32/i2c: use one static per instance instead of an array. 2022-02-26 01:23:17 +01:00
Dario Nieuwenhuis
8d46d31824 stm32/dbgmcu: do not use macrotable. 2022-02-26 01:20:42 +01:00
Timo Kröger
48f700b35c stm32 usart: Fix RX interrupt flag handling 
* On v1 interrupts cannot be cleared individually.
  Instead they are cleared implicitly by reading or writing DR (which we do now).
* Multiple error flags can be set at the same time:
  Handle them all in one go intstead of re-entering the ISR for each one so that
  we do not lose any error flags on v1 hardware.
* Wake when the RX buffer becomes full: This allows fast running chips to pull data
  from the buffer before receiving the next byte.
 2022-02-25 14:32:39 +01:00
Dario Nieuwenhuis
0ad7a3aa6f stm32: fix chips without dbgmcu (wl55 cm0 core) 2022-02-25 01:16:23 +01:00
Dario Nieuwenhuis
ea5cd19c30 stm32: fix build for h7ab 2022-02-24 06:28:29 +01:00
Dario Nieuwenhuis
1ff80f8438 stm32/mco: fix on h7ab 2022-02-24 06:28:29 +01:00
Dario Nieuwenhuis
2a246be06e stm32/time_driver: use trait impls from the main timer mod. 2022-02-24 06:28:29 +01:00
Dario Nieuwenhuis
e8ca5f9b04 stm32/rcc: fix build on l0 chips without CRS 2022-02-24 06:28:29 +01:00
Dario Nieuwenhuis
bf80504ac7 stm32: centralize gpio reg access in the gpio module. 2022-02-24 02:49:20 +01:00
Dario Nieuwenhuis
1b3c34b923 stm32/gpio: fix wrong conf for AF input. 2022-02-24 00:37:15 +01:00
Dario Nieuwenhuis
17e77ede3f stm32f1: fix wrong AF type in uart, can. 2022-02-24 00:37:15 +01:00
Dario Nieuwenhuis
052f370de9 stm32: move ADC, DAC pin impls to build.rs 2022-02-23 20:21:28 +01:00
Dario Nieuwenhuis
30ce71127a stm32: move MCO pin impls to build.rs 2022-02-23 19:54:46 +01:00
Dario Nieuwenhuis
1e69a8c484 stm32: move pin trait impls from macrotables to build.rs 2022-02-23 19:54:46 +01:00
Dario Nieuwenhuis
b4abb1f5c2 stm32: move dma trait impls from macrotables to build.rs 2022-02-23 19:16:37 +01:00
Dario Nieuwenhuis
2abb04d4d1 stm32/rcc: fix f3 build failure. 2022-02-23 03:42:46 +01:00
Dario Nieuwenhuis
39d06b59cd Update stm32-data 2022-02-14 02:12:06 +01:00
bors[bot]
eb922c4655
Merge #608 
608: stm32f4: add adc + example r=Dirbaio a=ain101

Example tested on stm32f407vg Discovery Board.
minimal adc: no vref, dma, complex sequence

Co-authored-by: Frederik <frederik@frederik.at>
 2022-02-13 11:44:59 +00:00
Frederik
7a3d34c1ed fix build for stm32f410tb 2022-02-12 23:56:50 +01:00
Frederik
6f0488cbe7 remove unnecessary mod 2022-02-12 23:55:58 +01:00
Dario Nieuwenhuis
340eb4eead stm32: add rust stable support 2022-02-12 02:45:52 +01:00
bors[bot]
f2eb438905
Merge #615 
615: rp: remove OptionalPin r=Dirbaio a=Dirbaio

Mirror of https://github.com/embassy-rs/embassy/pull/605 for rp2040

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
 2022-02-12 00:46:40 +00:00
Dario Nieuwenhuis
4a75475cfc stm32: remove unused sealed::OptionalPin 2022-02-12 01:34:09 +01:00
Dario Nieuwenhuis
20e14b8edb embassy, embassy-nrf: add nightly Cargo feature to gate nightly-only features. 2022-02-12 01:16:31 +01:00
Dario Nieuwenhuis
6c925b2342 blocking_mutex: refactor to work on stable. No GATs, and can be constructed in const. 2022-02-12 01:16:31 +01:00
Frederik
e4f240823d adc cleanup retval 2022-02-11 17:48:32 +01:00
Frederik
7a3d28ad00 stm32f4: add adc + example 
Example tested on stm32f407vg Discovery Board.
minimal adc: no vref, dma, complex sequence
 2022-02-10 23:28:41 +01:00
Dario Nieuwenhuis
b99ab3d5d9 stm32: Add standard crate-wide macros for pin/dma traits, switch all drivers to use them. 2022-02-10 21:38:03 +01:00
Dario Nieuwenhuis
a8bd3ab952 Add missing + 'd on unborrows. 2022-02-10 16:06:42 +01:00
Dario Nieuwenhuis
550da471be stm32: Remove OptionalPin 
The idea behind OptionalPin has a few problems:

- you need to impl the signal traits for NoPin which is a bit weird https://github.com/embassy-rs/embassy/blob/master/embassy-stm32/src/dcmi.rs#L413-L416
- you can pass any combination of set/unset pins, which needs checking at runtime  https://github.com/embassy-rs/embassy/blob/master/embassy-stm32/src/dcmi.rs#L130

The replacement is to do multiple `new` constructors for each combination of pins you want to take.
 2022-02-10 02:38:10 +01:00
bors[bot]
1d265b73b2
Merge #601 
601: [part 1/n] Change macrotables to build.rs codegen r=lulf a=Dirbaio

This PR replaces the "macrotables" (the macros like `stm32_data::peripherals!`) with a `const METADATA`.

Macrotables had some problems:

- Hard to debug
- Somewhat footgunny (typo the "pattern" and then nothing matches and the macro now expands to nothing, silently!)
- Limited power
  - Can't count, so we had to add a [special macrotable for that](f50f3f0a73/embassy-stm32/src/dma/bdma.rs (L26)).
  - Can't remove duplicates, so we had to fallback to [Rust code in build.rs](f50f3f0a73/embassy-stm32/build.rs (L105-L145))
  - Can't include the results as a listto another macro, so again [build.rs](https://github.com/embassy-rs/embassy/blob/master/embassy-stm32/build.rs#L100-L101).

They work fine for the 95% of cases, but for the remaining 5% we need Rust code in build.rs. So we might as well do everything with Rust code, so everything is consistent.

The new approach generates a `const METADATA: Metadata = Metadata { ... }` with [these structs](https://github.com/embassy-rs/embassy/blob/unmacrotablize/stm32-metapac-gen/src/assets/metadata.rs) in `stm32-metapac`. `build.rs` can then read that and generate whatever code.


Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
 2022-02-09 15:27:35 +00:00
bors[bot]
d91bd0b9a6
Merge #602 
602: Add stm32 USB OTG peripherals r=Dirbaio a=chemicstry

Fixes #557. This is similar to #580, but for synopsys IP.

I could add examples to other chips, but I have no way of testing them. The F4 example is tested and working.

Co-authored-by: chemicstry <chemicstry@gmail.com>
 2022-02-09 00:29:00 +00:00
chemicstry
10981ee809 Cleanup 2022-02-09 02:10:54 +02:00
chemicstry
1f81a69347 Merge USB FS and HS peripherals. Add ULPI. 2022-02-09 02:02:23 +02:00
Dario Nieuwenhuis
8160af6af9 stm32: replace peripheral_rcc! macrotable with build.rs 2022-02-09 00:58:17 +01:00
Dario Nieuwenhuis
d1a9680422 stm32: change interrupt declarations from macrotables to build.rs. 2022-02-09 00:45:52 +01:00
Dario Nieuwenhuis
940412c034 stm32/build.rs: switch to using stm32-metapac metadata and quote. 2022-02-09 00:31:21 +01:00
Matous Hybl
d37d714314 stm32: Add support for FMC 2022-02-08 17:30:20 +01:00
Matous Hybl
fee1de109d Fix RCC configuration for H7. 2022-02-08 14:36:53 +01:00
chemicstry
db0d798b48 Add stm32 USB OTG peripherals 2022-02-08 01:46:32 +02:00
Dario Nieuwenhuis
fbaa7e59d5 stm32/dma: fix interrupt codegen for new stm32-data 2022-02-05 03:03:32 +01:00
Dario Nieuwenhuis
f8b8872fa6
Merge pull request #593 from embassy-rs/remove-traits 
traits: migrate Delay to embedded-hal 1.0+async, remove Rng and Flash.
 2022-02-05 01:53:01 +01:00
Greg V
8bb41a3281 stm32f3: fix nonexistent cfg tests 
The rcc code was taken from stm32-rs which uses 'x' features, but
embassy uses features with full chip names.

Add these 'x' wildcards as cfgs and use them in rcc.
They will be useful for USB too.
 2022-02-02 22:53:03 +03:00
Dario Nieuwenhuis
0719b05d63 traits: migrate Delay to embedded-hal 1.0+async, remove Rng and Flash. 2022-01-27 00:08:02 +01:00
Ulf Lilleengen
4032fc0655 Support unstable-trait feature for stm32 2022-01-26 22:39:06 +01:00
Sam Lakerveld
3fc54236ea
stm32/i2c: allow empty transfers with async api 2022-01-25 16:28:49 +01:00
Dario Nieuwenhuis
a8580ec78a stm32/rcc: fix stm32f410 2022-01-24 00:50:35 +01:00
Dario Nieuwenhuis
533ceb707c stm32: add tim4, tim5 support for time-driver (stm32f410 doesn't have tim2, tim3) 2022-01-24 00:50:10 +01:00
Dario Nieuwenhuis
79f60adbfb stm32: add time-driver-any cargo feature that automatically picks one available timer. 2022-01-24 00:24:53 +01:00
Dario Nieuwenhuis
889d757ab8 stm32/spi: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
3d27a0e7cb stm32/dma: make lowlevel api take ptrs instead of slices. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
97ab859f00 stm32/i2c: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
c949519714 stm32/usart: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
ade44e91c4 stm32/exti: add wait_for_high, wait_for_low. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
b526addf7b stm32/exti: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
58fc64722c stm32/gpio: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
52e156b429 stm32: use critical_section instead of cortex_m::interrupt 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
ecda57dff1 stm32: remove unused .pep8 file 2022-01-19 17:59:55 +01:00
Matous Hybl
4988dfe981 Make advanced timer trait not require general purpose timer trait as the timers are too different. 2022-01-18 11:18:54 +01:00
Greg V
9fcc207629 stm32l1/rcc: fix clock frequency assertion 
It was comparing a number in Hz (!) to "32" (MHz).
embassy-stm32's units don't work like those used by stm32-hal :/
 2022-01-14 22:59:57 +03:00
Greg V
456b56d4fd stm32l1/rcc: set required flash bits for high frequencies 
As is done for lots of other families
 2022-01-14 22:59:57 +03:00
Matous Hybl
66e46d8012 Add the possibility to reconfigure Spi mode and bit order configuration on the fly. 2022-01-14 12:50:58 +01:00
Matous Hybl
e07df92651 Make RCC accessible using low-level API. 2022-01-13 16:12:45 +01:00
Matous Hybl
16d09f074a Add simple PWM, add PWM pin definitions also accessible from low-level API. 2022-01-13 16:05:54 +01:00
Matous Hybl
a1f7a94c69 Add low level timer API. 2022-01-13 16:05:54 +01:00
Ulf Lilleengen
2bc105803a Make exti an optional feature 
* Add embassy-stm32 build with exti
* Add exti to examples
 2022-01-12 14:28:10 +01:00
Dario Nieuwenhuis
3486d59d73 stm32: remove Dbgmcu from public API. 
The use case is already covered by `config.enable_debug_during_sleep`.
 2022-01-05 00:00:44 +01:00
Dario Nieuwenhuis
2eb0cc5df7 stm32/rcc: remove Rcc struct, RccExt trait. 
All the RCC configuration is executed in init().
 2022-01-05 00:00:44 +01:00
Dario Nieuwenhuis
c3fd9a0f44 stm32/rcc: f4/f7 cleanup and make a bit more consistent. 2022-01-04 21:17:17 +01:00
Dario Nieuwenhuis
b06e705a73 stm32/rcc: change family-specific code from dirs to single files. 
Consistent with how other peripherals handle their versions.
 2022-01-04 19:28:15 +01:00
Dario Nieuwenhuis
89b009b11d stm32h7/rcc: remove unneeded DMA enable settings. 
These are automatically enabled by dma::init().
 2022-01-04 13:31:30 +01:00
Dario Nieuwenhuis
5d2f40b337 stm32wl/rcc: remove unneded gpio enables in RCC. 
These are already done by gpio::init().
 2022-01-04 13:31:30 +01:00
Dario Nieuwenhuis
cdc66e110f stm32/rcc: remove builders on Config. 
This makes API consistent with other Config structs in Embassy, where
the convention is to not use builders.
 2022-01-04 13:31:30 +01:00
bors[bot]
cdfd128185
Merge #545 
545: Add adapter for implementing async traits for blocking types r=lulf a=lulf

This allows writing drivers relying on async traits, while still
functioning with implementations that already implement the embedded-hal
traits.

Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
 2022-01-03 14:17:21 +00:00
bors[bot]
c0e94a7042
Merge #563 
563: Initial ADC support for on STM32F1xx  r=Dirbaio a=sjoerdsimons

Add an ADC implementation for F1 based chips. Primarily tested using ADC1, proper functionality for ADC2 probably needs some extra work as it's mainly a slave and can't e.g. measure vrefint by itself.

Needs https://github.com/embassy-rs/stm32-data/pull/115

Co-authored-by: Sjoerd Simons <sjoerd@collabora.com>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
 2022-01-01 11:45:23 +00:00
bors[bot]
c20ef419a6
Merge #558 
558: Port buffered uart to v1 stm32 hardware r=Dirbaio a=DCNick3

#526 seems to suggest that it will be rewritten for DMA support, but I am not sure how to implement it and the port was quite straightforward, so here it is. It might be immediately useful before DMA version will be implemented

Note that I have not tested this on v2 hardware

Co-authored-by: Nikita Strygin <nikita6@bk.ru>
 2022-01-01 10:51:14 +00:00
Sjoerd Simons
92f2c6d09c adc: Implement support for f1 ADC block 
Add basic support for the STM32F1xx ADC blocks.
 2021-12-30 10:51:54 +01:00
Sjoerd Simons
a93b1141e9 stm32f1: Store adc clock rate in Clocks struct 2021-12-30 10:50:28 +01:00
Ben Gamari
8da6471a50 stm32/dac: Fix disable_channel 
Previously disable_channel enabled rather than disabled the requested
channel due to an apparent copy-paste error. Refactor to eliminate this
sort of issue by construction.
 2021-12-28 23:27:59 -05:00
Nikita Strygin
a94932be02 Mark clear_interrupt_flag as unsafe 2021-12-26 18:29:41 +03:00
Nikita Strygin
6b08c70273 Port buffered uart to v1 stm32 hardware 
- No DMA
- Create clear_interrupt_flag function to
    handle differences between v1 and v2 hardware
 2021-12-26 18:13:19 +03:00
Dario Nieuwenhuis
d1740b10f0 Lower some verbose logs to trace. 2021-12-23 13:43:14 +01:00
Ulf Lilleengen
3811c0a401 Add adapter for implementing async traits for blocking types 
This allows writing drivers relying on async traits, while still
functioning with implementations that already implement the embedded-hal
traits.

Add examples to stm32l4 for using this feature.
 2021-12-17 12:54:51 +01:00
Ulf Lilleengen
2bbd1ddb8a Remove unneeded rustfmt::skip 2021-12-16 11:37:53 +01:00
Ulf Lilleengen
985c11fad5 Update rust-toolchain 2021-12-16 11:34:20 +01:00
bors[bot]
d5a3064c2c
Merge #540 
540: Initial support for STM32F3 r=Dirbaio a=VasanthakumarV

The [companion PR](https://github.com/embassy-rs/stm32-data/pull/109) in `stm32-data` should be merged before this PR.
The examples were tested on an STM32F303VC MCU.

Co-authored-by: VasanthakumarV <vasanth260m12@gmail.com>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
 2021-12-16 07:30:03 +00:00
Grant Miller
6597e67036 Add finish_dma function 2021-12-14 17:46:25 -06:00
Grant Miller
a13a7a6616 Replace wait_for_idle with spin_until_idle 2021-12-14 17:46:25 -06:00
Grant Miller
e75cb1a564 Regs type alias 2021-12-14 15:39:00 -06:00
Grant Miller
b06658c195 Refactor new 2021-12-14 15:39:00 -06:00
VasanthakumarV
78c5d65ca9 [lint] Add newline in pwr file 2021-12-13 18:16:58 +05:30
VasanthakumarV
3f33d307ff [feature] Add rcc register support for F3 2021-12-13 14:50:13 +05:30
VasanthakumarV
e2c074d133 [feature] Add pwr register support for F3 2021-12-13 13:49:41 +05:30
VasanthakumarV
7733d11f90 [generate] Add stm32f3 chips to the Cargo manifest 2021-12-13 13:49:41 +05:30
huntc
45ef944457 Stm flush required implementing also, along with std alloc split 2021-12-10 15:11:41 +11:00
Matous Hybl
1dd5a71c07 Add DCMI peripheral support. 2021-12-09 12:56:39 +01:00
Dario Nieuwenhuis
4ddd23d623 stm32/usart: unify v1 and v2 2021-12-08 05:12:48 +01:00
Dario Nieuwenhuis
022c4cb739 stm32/dma: simplify impls a bit. 2021-12-08 03:30:07 +01:00
Dario Nieuwenhuis
b316d2620c stm32/dma: improve trait docs, seal Word. 2021-12-08 03:18:15 +01:00
Dario Nieuwenhuis
6179da6b9c stm32/dma: eagerly start transfers when calling the functions. 
`async fn`s do nothing until polled, but we want the DMA transfer to
immediately start in this case. Drivers rely on it. Some require special
orders, such as "start DMA, start SPI, then wait for DMA" which is awkward
to do without eager start.

Also use a manually-impl'd future, this allows getting rid of the "double"
Unborrow channel clone.
 2021-12-08 03:04:39 +01:00
Dario Nieuwenhuis
4e349d0f5d stm32/dma: use the right waker slot number for DMA2 (must add 8) 2021-12-08 01:54:31 +01:00
Dario Nieuwenhuis
fd2fe62b5f stm32/dma: rename is_stopped to is_running. 
Note that this does NOT invert the result of `en()` because it was
wrong before.
 2021-12-08 01:51:39 +01:00
Matous Hybl
b2910558d3 Refactor DMA traits. 2021-12-07 21:43:47 +01:00
Joshua Salzedo
e2719aba10 Further extend the dma channel trait 2021-12-07 21:43:47 +01:00
Joshua Salzedo
93e047ede2 cargo fmt 2021-12-07 21:43:47 +01:00
Joshua Salzedo
3411039cb9 Implement extended Channel trait to bdma.rs 2021-12-07 21:43:47 +01:00
Joshua Salzedo
2d2c6d0e01 Implement extended Channel trait to dma.rs 2021-12-07 21:43:47 +01:00
Joshua Salzedo
3272987d92 Expand channel trait 2021-12-07 21:43:47 +01:00
Ulf Lilleengen
f9ac0c8047 Add back MISO flush 2021-12-07 09:40:45 +01:00
Grant Miller
79baa04118 Implement blocking traits with a macro 2021-12-07 00:03:52 -06:00
Grant Miller
bf1f80afa1 Unify blocking trait impls 2021-12-07 00:03:52 -06:00
Grant Miller
3a17e3a2a5 Move async trait impls to mod 2021-12-07 00:03:52 -06:00
Grant Miller
20d2151b1d check_error_flags function 2021-12-07 00:03:52 -06:00
Grant Miller
496579b48b Move Word trait to mod 2021-12-07 00:03:52 -06:00
Grant Miller
7c78247be3 v2: set frxth and ds in new 2021-12-06 22:36:53 -06:00
Grant Miller
d76bc45e30 Move Spi drop impl to mod 2021-12-06 17:19:55 -06:00
Grant Miller
bd9e730024 Move set_word_size to mod 2021-12-06 16:47:08 -06:00
Grant Miller
a35b7d90bc Add tx_ptr and rx_ptr methods 2021-12-06 16:33:06 -06:00
Grant Miller
a35f337bd6 Move Spi::new and Spi::compute_baud_rate to mod 2021-12-06 15:19:24 -06:00
Grant Miller
75374ce7e8 Fix ssoe in v1 2021-12-06 14:57:53 -06:00
Grant Miller
e1cccc8391 Move Spi to mod (without NoDma defaults) 2021-12-06 14:47:50 -06:00
Grant Miller
aeb69a7665 Track current word size in v2 and v3 also 2021-12-06 14:24:02 -06:00
Grant Miller
d51885c0eb Move WordSize methods to mod 2021-12-06 14:13:25 -06:00
Grant Miller
d426caefbf Move NoPin impls from v1 to mod 2021-12-06 14:02:21 -06:00
Ulf Lilleengen
81ec4c82fd Flush MISO before transfer operation 2021-12-03 09:53:28 +01:00
Matous Hybl
6e0eb33ea8 Downcast timer to GP16 for time drivers. 2021-12-02 18:07:05 +01:00
Matous Hybl
f0cb77443c Fix wrong pin configuration in STM32's SPI v3. 2021-12-01 22:18:14 +01:00
Dario Nieuwenhuis
b0fabfab5d Update stm32-data: rcc regs info comes from yamls now. 2021-11-29 02:28:02 +01:00
Ulf Lilleengen
25b49a8a2a Remove common clock types 
Different STM32 RCC peripherals have different capabilities and register
values. Define types for each RCC types inside each module to ensure
full range of capabilities for each family can be used
 2021-11-28 16:46:08 +01:00
Dario Nieuwenhuis
006e567716 stm32/pwm: allow using the advanced timer instances too. 2021-11-27 03:06:53 +01:00
Dario Nieuwenhuis
d7d1258411 stm32/pwm: small cleanups 2021-11-27 03:05:10 +01:00
Dario Nieuwenhuis
22fad1e7bc stm32/pwm: impl instance/pin for all chips 2021-11-27 03:04:50 +01:00
Ben Gamari
8211d58ee2 stm32/pwm: initial commit 2021-11-27 02:50:30 +01:00
Dario Nieuwenhuis
88d4b0c00d stm32: add stm32g4 support. 2021-11-27 02:34:23 +01:00
Ulf Lilleengen
cd9a1d547c Ensure SPI DMA write is completed 
Fix a bug where DMA writes were not fully completed and only a single
byte out of two were written.
 2021-11-24 14:59:18 +01:00
Dario Nieuwenhuis
e187f50f4b stm32: remove unused deps 2021-11-24 01:41:51 +01:00
Dario Nieuwenhuis
dfb6d407a1 stm32: rename core features from _cmX to -cmX, cleanup gen. 2021-11-23 23:49:06 +01:00
Wilfried Chauveau
eac604accd
Fix missing lifetime bounds 2021-11-21 10:10:28 +00:00
Dario Nieuwenhuis
24e5013c00 Allow unused to fix build failure in u5 2021-11-17 21:43:05 +01:00
Bob McWhirter
ee1490bce1 Move to the newly released bxcan crate that supports defmt 0.3. 2021-11-15 13:18:53 -05:00
Bob McWhirter
c2da498263 Update to defmt 3.0ish. 
Lots of gitrevs deps.
 2021-11-15 11:09:08 -05:00
bors[bot]
8193885cb5
Merge #482 
482: Add MCO peripheral. r=Dirbaio a=matoushybl

This PR adds an abstraction over STM32 RCC feature called MCO (Microcontroller Clock Output). The clock output can bind to several clock sources and then can be scaled using a prescaler.

Given that from the embassy ecosystem the RCC is generaly invisible to the user, the MCO was implemented as a separate peripheral bound to the pin where the clock should appear.

Co-authored-by: Matous Hybl <hyblmatous@gmail.com>
 2021-11-11 16:20:02 +00:00
Matous Hybl
c14642cffc Add MCO peripheral. 2021-11-11 11:34:09 +01:00
bors[bot]
96e2f0dfc5
Merge #468 
468: Add v1c ethernet driver for the STM32F7 family. r=Dirbaio a=matoushybl



Co-authored-by: Matous Hybl <hyblmatous@gmail.com>
 2021-11-10 22:07:38 +00:00
Matous Hybl
f0ba79059e Add v1c ethernet driver for the STM32F7 family. 2021-11-10 10:16:46 +01:00
Bob McWhirter
12a64b867b More support for U5 PWR (ish), RCC, and FLASH (ish). 2021-11-08 14:27:33 -05:00
Bob McWhirter
5f124ec49f Update U5 to init RCC. 2021-11-08 14:20:51 -05:00
Matous Hybl
9b5d9fbfca Fix v2 ethernet pin definitions. Fix ethernet example for H7 nucleos. 2021-11-04 16:25:30 +01:00
bors[bot]
1bf6e646c9
Merge #465 
465: Adjust for STM32U5. r=lulf a=bobmcwhirter



Co-authored-by: Bob McWhirter <bmcwhirt@redhat.com>
 2021-11-02 20:42:41 +00:00
Bob McWhirter
d1272e00bb Prefix unused variable for now. 2021-11-02 15:45:56 -04:00
Bob McWhirter
44056c2e75 Less allowy. 2021-11-02 15:32:20 -04:00
Bob McWhirter
076c795ebb Even more allowed unused. 2021-11-02 15:28:14 -04:00
Bob McWhirter
6bbf450478 Allow unused macros temporarily until U5 supports DMA. 2021-11-02 15:20:42 -04:00
Ulf Lilleengen
205a223af3 Update versions of critical-section and atomic-polyfill 2021-11-02 18:52:03 +01:00
Bob McWhirter
705523d0ea Fix formatting. 2021-11-02 12:13:42 -04:00
Bob McWhirter
f12b70535b Adjust for STM32U5. 2021-11-02 12:05:24 -04:00
Bob McWhirter
bbff98ed0d Move the use inside the macro call, inside another set of braces in case it percolates up twice. 2021-10-26 14:34:03 -04:00
Bob McWhirter
a72816492a Only attempt to enable the dmamux peri clock if it has an enable bit. 2021-10-26 14:19:03 -04:00
Bob McWhirter
959aecf6ac Enable the DMAMUX clocks. 2021-10-26 14:01:39 -04:00
Matous Hybl
015cad84dd Initial support for STM32F767ZI. 2021-10-26 17:33:28 +02:00
bors[bot]
01e5376b25
Merge #456 
456: Fix L4 clock setup for MSI and PLL to allow RNG operation r=Dirbaio a=lulf

Example is tested on STM32L475VG.

Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
 2021-10-26 11:59:14 +00:00
Ulf Lilleengen
e55726964d Fix clock setup for MSI and PLL to allow RNG opereation 
Add RNG example using PLL as clock source.
 2021-10-26 13:45:53 +02:00
Ulf Lilleengen
f8ebc967a9 Add implementation of async trait for STM32 I2C v2 
* Add DMA read implementation for I2C v2
* Add example using DMA for I2C
 2021-10-21 12:30:02 +02:00
Ulf Lilleengen
d2a79a46c5 Configure the correct pin instances 2021-10-21 11:57:00 +02:00
Tobias Pisani
43a7226d8b inline FRE register check for SPI on F1 2021-10-11 23:33:32 +02:00
Tobias Pisani
2cbb8a7ece Add AFType::Input for input configurations. 2021-10-11 22:57:21 +02:00
Tobias Pisani
259e84e68e Make miso/mosi optional when for unidirectional spi 
Only suported on v1 currently
 2021-10-11 22:57:21 +02:00
Tobias Pisani
c44bed300b Correctly set alternate function for stm32f1 gpios 2021-10-11 22:57:21 +02:00
Tobias Pisani
091e7e1f98 Generate USART pin definitions for stm32f1 2021-10-11 22:57:21 +02:00
Tobias Pisani
39880de958 partial alternate function configuration on STM32f1 2021-10-11 22:57:10 +02:00
Tobias Pisani
f9a576d13d feat: Add spi support for STM32F1 variants 2021-10-11 22:39:48 +02:00
Ben Gamari
006bbea51a stm32/adc: Add IN0 channel 2021-09-29 00:32:40 -04:00
Ben Gamari
5a38cc2140 stm32/dac: Ensure that clock is enabled 2021-09-29 00:32:40 -04:00
Ben Gamari
0b9961584b stm32/adc: Ensure that clock is enabled 
Sadly due to the inconsistency in clocking configuration across devices
we cannot use RccPeripheral.
 2021-09-29 00:32:40 -04:00
Ben Gamari
573e6ec373 stm32g0: Add support for low-power run 2021-09-28 21:19:10 -04:00
Ben Gamari
794798e225 stm32g0: Add support for HSI divider 2021-09-28 21:19:10 -04:00
Ben Gamari
aa4069fe10 stm32/adc: Fix ADC support for STM32G0 2021-09-28 21:19:10 -04:00
Ben Gamari
e2e0464d04 stm32/adc: Factor out conversion logic 
Also guard errata workaround correctly.
 2021-09-28 18:00:05 -04:00
Mariusz Ryndzionek
ce361abb1b Changing the casts (code review request) 2021-09-28 18:31:04 +02:00
Mariusz Ryndzionek
bce909ec1e Initial STM32F1 family support with two examples for STM32F103C8 (Blue Pill) 2021-09-28 18:31:04 +02:00
Joshua Salzedo
ab60cfd64b
Patch additional regressions 2021-09-27 15:48:56 -07:00
Joshua Salzedo
67e2f9159c
set moder::ALTERNATE last when configuring pins to AF modes. 
- as per STM32F4xx_hal's impl
 2021-09-27 15:27:43 -07:00
Joshua Salzedo
07e20a7443
Pub use version-specific CRC symbols, not just the CRC struct. 2021-09-27 11:17:31 -07:00
Joshua Salzedo
a26ffeb84b
Cargo fmt 2021-09-27 10:49:32 -07:00
Joshua Salzedo
e36d4f460a
Fix variable names in crc_v2/v3. 
removed `reclaim` in crc_v1.
used write instead of modify.
renamed `init` to `reset` in crc_v1.
 2021-09-27 10:46:09 -07:00
Joshua Salzedo
43ad28b9f9
Use unborrow for CRC constructor 
sort feature gates
fix repetition in CRC config names
 2021-09-27 10:38:55 -07:00
Joshua Salzedo
7392e33ad5
cargo fmt 2021-09-26 19:20:21 -07:00
Joshua Salzedo
e67af514e9
Fix v2/3 module paths 2021-09-26 19:15:54 -07:00
Joshua Salzedo
642b0825a6
V3 is just an extension of V2, merge modules. 2021-09-26 19:14:08 -07:00
Joshua Salzedo
f9ff5336d4
Merge all of the crc_v2 configurations into a single modify call 2021-09-26 18:46:19 -07:00
Joshua Salzedo
8fac444c4e
Flesh out v2 config writes 2021-09-26 18:39:55 -07:00
Joshua Salzedo
afef19d813
Start work towards CRC_V2 2021-09-26 18:26:20 -07:00
Joshua Salzedo
7899d73359
Expose read so the value can be obtained without a write. 2021-09-26 17:28:58 -07:00
Joshua Salzedo
c892289b2c
Actually export CRC 2021-09-26 17:26:33 -07:00
Joshua Salzedo
24dea91f5a
Fix interface changes 2021-09-26 17:24:48 -07:00
Joshua Salzedo
e18a27eea2
First pass at CRC_V1 2021-09-26 16:46:17 -07:00
Joshua Salzedo
e527892d89
Start work on CRC_v1 2021-09-26 16:29:22 -07:00
Dario Nieuwenhuis
f8d833e0c5
Merge pull request #403 from mryndzionek/af_type 
Small adjustment to 'set_as_af' interface
 2021-09-24 20:20:45 +02:00
Mariusz Ryndzionek
e4b37c40c9 Code review request - moving OutputType to mod sealed 2021-09-24 19:56:48 +02:00
Mariusz Ryndzionek
d371298a27 Small adjustment to 'set_as_af' interface 
Small adjustment to 'set_as_af' interface - v2
 2021-09-24 18:39:07 +02:00
Vincent Stakenburg
7d6d274d55 Add MSI and PLL clock source for L4 2021-09-24 18:27:39 +02:00
Ulf Lilleengen
b6fc19182b Add pwr for L1 and update RCC to new reg block 2021-09-23 14:51:16 +02:00
Ulf Lilleengen
9d45018077 Refactor V1 SPI 2021-09-21 14:50:23 +02:00
Ulf Lilleengen
c79485c286 Support for STM32L1 
* Add RCC
* Fix more issues with dash in chip names
* Update stm32-data version
* Add blinky and spi example
 2021-09-21 14:50:23 +02:00
Ulf Lilleengen
fb697a2657 Updates 2021-09-15 12:46:20 +02:00
Dario Nieuwenhuis
bb72f7eb98
Merge pull request #390 from lulf/wasm-executor 
Wasm executor support
 2021-09-13 18:55:17 +02:00
Ulf Lilleengen
99a94f1d50 Update version of critical-section 2021-09-13 17:05:17 +02:00
Dario Nieuwenhuis
d6faf69e09
Merge pull request #378 from numero-744/gen-features-using-rust-not-python 
Use our beloved Rust instead of Python
 2021-09-13 16:47:01 +02:00
Ulf Lilleengen
e24528051b Add WASM support for executor 
* Adds an executor for WASM runtimes based on wasm_bindgen.
* Add time driver based on JS time handling.
* Add example that can run in browser locally.
* Update to critical-section version that supports 'std' flag
 2021-09-13 16:42:39 +02:00
Côme ALLART
99ccf18160 fix(gen-features): keep data files order 2021-09-11 20:04:57 +02:00
Dario Nieuwenhuis
ead987245d embassy: Refactor module structure to remove kitchen-sink util. 2021-09-11 02:35:35 +02:00
Dario Nieuwenhuis
f2623e7e9b Update lots of deps 2021-09-11 01:35:23 +02:00
Adam Greig
14fa6c2760
STM32H7: Ethernet: Disable RA in MAC filtering, fix order of MACA0 register writes. 2021-09-06 23:16:43 +01:00
Bob McWhirter
d4bf78a0c1 Don't set SAF=true, do set RA=true for Ethernet. 
Source-Address-Filtering is not helping the board to receive packets.
For unknown reasons, the Receive-All is required, when in theory
it should not be required. Until we figure it out, follow the
stm32h7xx-hal example of setting RA=true.
 2021-09-06 14:21:26 -04:00
Dario Nieuwenhuis
eff8ae9c4d
Merge pull request #381 from lulf/stm32wl55-subghz 
Add HAL for SubGhz peripheral for STM32 WL series
 2021-09-06 00:58:42 +02:00
Dario Nieuwenhuis
de016e8456 Remove trait_alias, allow(incomplete_features). 
trait_alias seems unused. no idea why it's there.
 2021-09-03 17:00:58 +02:00
Ulf Lilleengen
0f3d278ce3 Temporarily comment unused code 2021-09-02 11:31:38 +02:00
Ulf Lilleengen
4dccda085f Add missing files for G0 2021-09-02 11:19:54 +02:00
Ulf Lilleengen
f175574bcf Cargo fmt 2021-09-02 10:43:08 +02:00
Ulf Lilleengen
16aa1d1770 ADd missing file 2021-09-02 10:42:11 +02:00
Ulf Lilleengen
7ad6280e65 Add HAL for SubGhz peripheral for STM32 WL series 
Based on the HAL from stm32wl, the peripheral driver has been
modified to fit into embassy, using the embassy APIs, providing
operation of the radio peripheral.

The initial version does not offer any async APIs, but the example
shows how the radio IRQ can be used to perform async TX of the radio.
 2021-09-02 10:39:56 +02:00
Bob McWhirter
37ceae908b Rename Random impl to Rng. 
Create Random struct providing next_x(range) for all T:Rng.
 2021-09-01 09:39:33 -04:00
Bob McWhirter
7fa3b27cac Move random utils to another trait. 2021-08-30 09:55:29 -04:00
Bob McWhirter
d525f51940 Add a convenience next(range) to Rng. 2021-08-27 16:10:01 -04:00
Côme ALLART
022b809248 refactor(gen_features): use Rust instead of Python 
Done for /embassy-stm32 only
The new generator is in /stm32-gen-features
/stm32-metapac could/should be added too
A CI check "generated features up to date" could/should be performed
 2021-08-27 11:09:27 +02:00
Dario Nieuwenhuis
e56c6166dc
Merge pull request #373 from embassy-rs/docs 
Time driver improvements, docs.
 2021-08-26 23:37:37 +02:00
Bob McWhirter
dc394dd477 Fixes #374: Ensure Rng's error is defmt-able. 2021-08-26 14:04:12 -04:00
numero-744
1098072384
build(stm32): remove gen.py build dependency 2021-08-26 18:59:37 +02:00
Dario Nieuwenhuis
7c0990ad1e time: allow storing state inside the driver struct. 2021-08-25 21:06:27 +02:00
Bob McWhirter
4aa52f1b9e Formatting. 2021-08-24 14:56:45 -04:00
Bob McWhirter
e36ae76e45 Fix blocking-write for SPI. 2021-08-24 14:44:47 -04:00
Ben Gamari
e2f71ffbbd Add support for STM32G0 2021-08-20 00:15:11 +02:00
Dario Nieuwenhuis
174c51f097 stm32/metapac: check GPIO RCC regs are always found. 2021-08-19 23:59:50 +02:00
Dario Nieuwenhuis
2c992f7010 stm32: move dbgmcu stuff to toplevel config setting, defaulting to true. 2021-08-19 23:50:19 +02:00
Dario Nieuwenhuis
446d6c275c stm32: remove last use of python at build time 2021-08-19 23:42:18 +02:00
Dario Nieuwenhuis
9f51f9a170 stm32/wl: add stub APB3 to get it to build. 
Completely untested.
 2021-08-19 22:51:41 +02:00
Dario Nieuwenhuis
637fcdd316 stm32/rcc: update for new version naming 2021-08-19 22:17:45 +02:00
Dario Nieuwenhuis
ec51880e28 stm32/exti: unify all versions into single impl 2021-08-19 22:17:17 +02:00
Dario Nieuwenhuis
d3aeb45fb3 Update cortex-m-rt to v0.7 for stm32, rp. 2021-08-19 00:56:11 +02:00
Timo Kröger
f141b98741 bxcan: Cleanup 
Older families like F1 and F4 have a consistent naming for the CAN
peripherals: CAN when there is only one instance, CAN1/CAN2/CAN2 if
there are multiple instances.
Newer families like L4 and F7 use the name CAN1 even if there is only
one instance. The number of filter banks is incorrect for those.

Affected chips:
* STM32F722
* STM32F723
* STM32F730
* STM32F732
* STM32F733
* STM32L4P5
* STM32L4Q5
* STM32L4R5
* STM32L4R7
* STM32L4R9
* STM32L4S5
* STM32L4S7
* STM32L4S9
* STM32L431
* STM32L432
* STM32L433
* STM32L442
* STM32L443
* STM32L451
* STM32L452
* STM32L462
* STM32L471
* STM32L475
* STM32L476
* STM32L485
* STM32L486
 2021-08-18 21:58:50 +02:00
Timo Kröger
0c3bede64f bxcan: Make bxcan a hard dependency 
There seems no way to enable a optional dependency from build.rs or
features passed through the command line.
 2021-08-18 21:58:50 +02:00
Timo Kröger
191a589820 bxcan: namechange "bxcan_v1" -> "can_bxcan" 2021-08-18 21:58:50 +02:00
Timo Kröger
dc6b7f3cba bxcan: Disable on drop 2021-08-18 21:58:50 +02:00
Timo Kröger
7c405250a7 CAN support with bxcan crate 2021-08-18 21:58:50 +02:00
Ulf Lilleengen
4df63f5379 Add per-core EXTI support 
* Generate a core index put into the PAC for the peripherals to use as
  index into registers.
* Add EXTI v2 which uses CORE_INDEX to index exti registers
 2021-08-17 16:22:47 +02:00
Ulf Lilleengen
61409e2fb6 Add example for STM32WL55 2021-08-17 16:22:47 +02:00
Bob McWhirter
a93ed2bed6 Add H7 exti button example using correct EXTI reg block offsets. 2021-08-16 15:15:07 -04:00
Ulf Lilleengen
cbff0398bb
Add IRQ-driven buffered USART implementation for STM32 v2 usart (#356) 
* Add IRQ-driven buffered USART implementation for STM32 v2 usart

* Implementation based on nRF UARTE, but simplified to not use DMA to
  avoid complex interaction between DMA and USART.
* Implementation of AsyncBufRead and AsyncWrite traits
* Some unit tests to ring buffer
* Update polyfill version
* Update sub module to get usart IRQ fix
 2021-08-16 17:16:49 +02:00
Thales Fragoso
c7ae2d2a3a stm32: Add fences to DMA code 2021-08-10 20:45:41 -03:00
Ben Gamari
40e7176e13 embassy-stm32: Eliminate use of unwrap 2021-08-05 22:40:08 +02:00
Ben Gamari
41aaff95f8 stm32h7: Use unwrap! 2021-08-05 22:39:59 +02:00
Ben Gamari
e44acd0d56 stm32f4: Use unwrap! where possible 2021-08-05 22:39:59 +02:00
Dario Nieuwenhuis
05e50e1f4a time_driver: use regular fn ptr -> raw ptr casts 2021-08-05 19:19:47 +02:00
Dario Nieuwenhuis
b1d631d639 stm32/time: add Cargo features to choose tim2/tim3 2021-08-05 19:14:09 +02:00
Dario Nieuwenhuis
0ea6a2d890 time: replace dyn clock/alarm with a global Driver trait 2021-08-05 19:14:09 +02:00
Dario Nieuwenhuis
cfa1f61154
Merge pull request #344 from bobmcwhirter/remove_builders 
Remove builders from Config(s) and examples.
 2021-08-04 21:32:39 +02:00
Dario Nieuwenhuis
07d4b196f7 Update nightly, remove removed features. 2021-08-04 19:48:14 +02:00
Dario Nieuwenhuis
9bd34429f3 stm32: add missing + 'a bounds on trait GATs 2021-08-04 19:39:54 +02:00
Bob McWhirter
f4971fbb79 Further work sharing config for example and removing duplicated code. 2021-08-04 13:39:02 -04:00
Bob McWhirter
03f15d3a60 Remove builders from Config(s) and examples. 2021-08-04 11:32:39 -04:00
Dario Nieuwenhuis
de77dc11ca
Merge pull request #301 from thalesfragoso/i2cv2-dma 
i2c-v2: Implement write_dma and write_dma_vectored
 2021-08-04 12:28:18 +02:00
Dario Nieuwenhuis
5d31dd328f
Merge pull request #341 from lulf/usart-dma-read 
Add uart::Read DMA-based implementation
 2021-08-04 11:02:15 +02:00
Ulf Lilleengen
0d02342b2d Rename bread -> read_blocking 2021-08-04 08:34:30 +02:00
Bob McWhirter
88c11a653c Formatting fixes. 2021-08-03 14:12:11 -04:00
Bob McWhirter
d7409d63e8 Enhance Rcc configuration to be more fluentish. 
Clean up H7 examples to remove all vegan HALs and PACs.
 2021-08-03 13:57:18 -04:00